Center stružnica

WEISSER UNIVERTOR 15

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone a comprehensive partial overhaul in our workshop. Among other things, both the main spindle bearings and the leadscrew/feedshaft bearings have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to inspect on-site. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Nkedpjthd Shofx Abbjt Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 - 0.888 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering. - All machines are thoroughly inspected. - All lubricants and, if necessary, worn parts are replaced in advance. - Upon request, we can carry out a complete or partial overhaul of the machine of your choice. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools directly. - Upon request, we can also install further accessories such as safety equipment, etc. - We are happy to arrange shipping and/or installation for you.

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Weiler C30 x 750 Precision Lathe (2007) Manufacturer: Weiler Model: C30 x 750 Year of manufacture: 2007 Availability: Multiple machines available Condition: Very good, used, from training workshop, last serviced 09/2024 Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 160 mm Cross slide travel: 180 mm Bed width: 240 mm Tool shank section: 20 x 20 mm Spindle nose as per DIN 55027 Gr.5 Front bearing spindle diameter: 70 mm Spindle bore: 40.5 mm Main spindle taper: 5 mm Drive power 60 %/100 % DC: 9/7 kW Total speed range: 1 - 4,500 rpm Longitudinal feed force: 6,000 N Face feed force: 3,000 N Feed range: 0.001 - 10 mm/rev Rapid traverse longitudinal/cross: 6/3 m/min Metric threads: 0.1 - 400 mm Inch threads: 56 - 1/4 TPI Module threads: 0.125 - 28 mm DP threads: 224 - 1 Dp Max. number of threads: 99 Quill diameter: 50 mm Quill stroke: 130 mm Quill taper: MT3 Length: 1,750 mm Width: 1,350 mm Height: 1,670 mm Nksdpfxoxd Tiws Abbet Weight: 1,300 kg Scope of delivery: Rota S Plus 200-52 3-jaw chuck Multifix quick-change toolpost Machine lamp Coolant unit Machine feet Original documentation Weiler maintenance log 09/2024

Stanje: novo, Swing diameter 560 mm Turning length 1910 mm Swing diameter over bed slide 355 mm Swing diameter in bed bridge 790 mm Centre height 280 mm Turning length in bed bridge 170 mm Spindle speeds 12 (25-1600) rpm Tailstock taper MK 5 Quill stroke 180 mm Quill diameter 75 mm Spindle mount DIN ISO 702-2 No. 8 Spindle bore 80 mm Spindle taper MK 7 Longitudinal feed 35 / 0.059 - 1.646 m/min Face feed 35 / 0.020 - 0.573 m/min Total power requirement 8.5 kW Machine weight approx. 2,560 kg Space requirement approx. 3450 x 1150 x 1650 mm Item no. 3462170 Heavy-duty machine featuring high flexibility, precision, and cost efficiency. Equipped with DPA 31 Plus digital position display and quick-change tool post. Description: - Hardened and ground Z-axis guideways - Guaranteed spindle nose run-out accuracy = 0.015 mm - Spindle mount Camlock DIN ISO 702-2 No. 8 - Leadscrew cover - Precisely machined carriage - All guides adjustable via gib strips - Forward/reverse operation on carriage, switchable via leadscrew - Dual-channel safety electronics - Central lubrication in the carriage - Cross slide adjustment range ±90° - Main spindle runs in oil bath - Shafts and gears run in oil bath - Gear wheels easy-running, hardened, ground, and mounted in 2 adjustable precision tapered roller bearings - Switches with life cycle calculation, tested according to EN ISO 13849 - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - Safety handwheels with disengagement function per EN 23125 on X and Z axes - Gears and shafts hardened and ground, running in precision bearings in oil bath - Clearly arranged selection levers for feed speed selection - Enclosed rapid-change feed gearbox design - Emergency stop slam switch, motor protection switch, lockable main switch - Emergency stop device, foot-operated - Tailstock for taper turning, adjustable ±10 mm - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm; quick, easy, and tool-free adjustment using clamping lever - Cable carrier for gentle cable and hose guidance - Heavily ribbed prismatic bed, induction-hardened and precision-ground cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy, complete draining and cleaning per DIN - Thread dial indicator scale adjustable Scope of delivery: - Fixed steady rest, max. passage Ø 165 mm - Travelling steady rest, max. passage Ø 95 mm Nodpfx Abeucgr Iobskt - LED machine lamp - TH 5615D-TH 5630D: Reducing sleeve MK 7/MK 5 - TH 5620V: Reducing sleeve Ø113 mm / MK 5 - Fixed centre MK 5 - Fixed and revolving centre MK 5 - Quick-change tool post 7-C - Tool holder 32 x 150 type D for square tool bits - Thread dial indicator - Initial machine fill with quality oil - Change gear set - Operating tools Special accessories included: - OPTIMUM 3-jaw chuck, centric clamping, Ø315 mm, Camlock DIN ISO 702-2 No. 8 (Item no. 3442768)

Stanje: novo, TC 165 x 750V Image shows MIOTAL® TC 180 x 1000 Centre distance: 750 mm Centre height: 165 mm Swing over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle mount: DIN 55029 (Camlock) D1-4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2,000 rpm Mechanical gearbox stages: 3 Nkjdpfxjir Igwe Abbst Motor power: 2.2 kW Longitudinal feed Z: (40) 0.044 - 1.96 mm/rev Cross feed X: (40) 0.022 - 0.98 mm/rev Metric threads: (32) 0.4 - 7.0 mm Inch threads: (32) 4 - 56 TPI Module threads: (32) 0.4 - 7.0 Diametral threads: (32) 7.5 - 112 Tailstock quill diameter: Ø 40 mm Tailstock quill taper: MT 3 Quill stroke: 100 mm Lateral offset: ± 10 mm Weight, approx.: 650 kg Features: - Inspection certificate to DIN standards - Precise, hardened and ground guideways - Robust headstock with oil circulation lubrication, precision spindle bearings, gears hardened and ground for long-lasting quality - Electromagnetic spindle brake (TC), frequency inverter with electric braking system (V models) - Torsion-resistant Meehanite cast iron beds, stress-relieved and extensively ribbed for maximum smoothness - Electrical equipment by SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse pushbutton for main spindle - CE / IEC as well as German documentation and German service Standard equipment (included accessories): - Machine stand with splash guard back panel - 3-jaw chuck - 4-way toolpost - Foot pedal with mechanical brake - Coolant system - Chuck guard and spindle guard in compliance with European CE safety standards - 1 fixed centre for main spindle - 1 fixed centre MT3 - 1 test report - Safety guards and electrical equipment according to CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Multifix quick-change toolpost system Also available as a geared head variant.

Stanje: dober (rabljeno), Leto izdelave: 1988, Weiler Lathe Type: Condor B Nsdpfevgmbvox Abbekt 2-axis digital readout Centre height: 165 mm Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle bore: 40 mm Connected load: 3 kW Spindle speed: 22-2800 rpm Tailstock taper: MT 3 Coolant pump (not connected) Work lamp automatic longitudinal and cross feed spindle brake - foldable chuck guard - splash guard Weight approx. 1040 kg 3-jaw chuck Multifix B tool post Live centre

Leto izdelave: 1977, Stanje: rabljeno, Turning diameter: 700-1500 mm Clamping length: 3000 mm Track gauge: 1676 mm Control system: Machine weight approx. 60 t Rafamet UBC 150 Wheelset Lathe for Railway Wheelsets Factory No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Standard processed wheelset track gauge: 1435 mm Supported track gauges: 1435 mm, 1524 mm, 1676 mm Processable wheelset length: 1640-3000 mm Wheelset running diameter: 700-1500 mm Driving diameter: 350-1350 mm Nksdpfeuddgljx Abbot Wheel tyre width: up to 140 mm Machine overall dimensions: 8700 x 3600 x 3250 mm Total installed power: 172 kW Machine weight: 59,200 kg Feed rate speeds Lifting and centering device: 2500 mm/min Headstocks: 1320 mm/min Quills: 550 mm/min Carriages (longitudinal direction): 1300 mm/min.

Stanje: dober (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 10279, premer struženja nad prečnim suportom: 200 mm, izvrtina vretena: 35 mm, premer struženja: 300 mm, višina središča: 150 mm, stružna dolžina: 750 mm, skupna dolžina: 1.860 mm, skupna širina: 700 mm, skupna višina: 1.800 mm, največja hitrost vretena: 2.800 obr/min, hitrost vretena (min.): 40 obr/min, skupna masa: 1.030 kg, - Operating voltage: 380 V - Connected load: 3 kW Nkjdjv Irgtjpfx Abbot - Rated current: 25 A - Frequency: 50 Hz Features: - Tailstock - Multifix Type B tool post - Three-jaw chuck (diameter: 160 mm) - 2-axis digital readout by RSF

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer struženja: 290 mm, stružna dolžina: 750 mm, skupna dolžina: 1.400 mm, skupna širina: 700 mm, skupna višina: 1.030 mm, največja hitrost vrtenja: 1.800 obr/min, nosilec vretena: MK 3, The following features and characteristics make the G2930 combination lathe unique and competitive on the market: 1. V-shaped guideways offer higher stability and are securely anchored. 2. The gearbox is fixed for maximum rigidity and provides comprehensive feed and thread-cutting functions. 3. State-of-the-art tapered roller bearings support the D1-4 spindle with the highest precision. 4. Automatic vertical feed enables maximum threading capabilities. 5. Cross-slide is equipped with T-slots. 6. Guideways are effectively controlled by adjustable jaws. 7. Advanced gearbox design with maximum functionality. 8. Maximum working range thanks to the lowered bed section. 9. Carriage-mounted spindle is controlled via a lever arm. 10. Two feed screws are integrated. 11. User-friendly forward/reverse interface with zero backlash. 12. Versatile tailstock, which can be offset for taper turning. 13. Emergency stop switch, load switch, process control, etc. are installed. TECHNICAL DATA Max. turning diameter over bed: 290 mm Max. turning diameter over cross slide: 165 mm Distance between centers: 750 mm Spindle taper: MT5 Spindle bore: 38 mm Max. tailstock quill travel: 80 mm Tailstock taper: MT3 Longitudinal carriage travel: 560 mm Cross-slide travel: 140 mm Compound slide travel: 80 mm Cross feed: 0.017~0.25 mm/rev, 15 steps Longitudinal feed: 0.07-1.0 mm/rev, 15 steps Metric threads: 0.2-3.5 mm, 18 steps Inch threads: 8-56 TPI, 21 steps Spindle speed range/levels: 50~1800 RPM, steplessly adjustable Motor output: 1.5 kW Further dimensions and weight: Nsdpexb Up Tefx Abbekt Overall dimensions: 1400 x 700 x 1030 mm Packing dimensions: 1450 x 750 x 970 mm Net weight: 290 kg Gross weight: 310 kg

Stanje: novo, Centre distance ----- 1000 mm Centre height ----- 230 mm Swing over bed ----- 460 mm Spindle bore ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25–2000 rpm Motor ----- 5.5 kW Weight ----- 1750 kg INCLUDES * 3-axis digital display brand SINO * Quick-change toolpost type Multifix TOOB2 with 4 holders * Self-centering 3-jaw chuck 250 mm Nksdpfx Aok Iug Tjbbet * Independent 4-jaw chuck 320 mm * Faceplate 350 mm * Fixed and travelling steady rests * LED work lamp and coolant system * Electric brake (CE) * Foot brake * Box with various tools

Stanje: novo, TC 205 x 1000 CVS Exhibition machine, color blue Technical Data: Swing over bed: 410 mm Centre height: 205 mm Swing over cross slide: 234 mm Swing in gap: 610 mm Bed width: 280 mm Between centers: 1000 mm Number of spindle speeds: 8 Speed range: 80 - 2000 rpm Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle taper: MT 6 Tailstock quill travel: 130 mm Tailstock taper: MT 4 Max. tool size: 22 mm Cross slide travel: 225 mm Top slide travel: 130 mm Thread cutting imperial: 2 - 72 T.P.I Thread cutting metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Main motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Njdpfjvzmtzex Abbekt Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splashguard rear panel - 4-way tool post - Foot brake - Emergency stop switch - Coolant system - Chip tray - Fixed centre - Change gear set - Reducing bush for main spindle - Machine pads - Service tools - Operating manual