Prehoden Optimiziran za testiranje baterij

Weiss Klimaprüfkammer WK 10/40-80 V= ca.10 m³

Leto izdelave: 2019, stanje: dober (rabljeno), Weiss Model: WK 10/40-80 Test Chamber Volume: approx. 10 m³ 10 m³ = 10,000 liters Weiss WK 10/40-80 Modular Climate Test Chamber Cooling unit configuration: water-cooled Refrigerant type: R449A Special equipment for battery testing: The climate test chamber is equipped with extended safety features for battery and accumulator tests (e.g., lithium-ion): • Pressure relief flap for controlled pressure discharge in case of malfunction • Gas warning device for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators These features significantly increase safety during battery testing and support use in development and test environments (subject to a customer-side safety concept/BMS). Description: Offered for sale is a professional climate test chamber from Weiss Technik, Model WK 10/40-80, year of manufacture 2019. The system is used for temperature and climate testing, ideally suited for industry, research, development, and quality assurance. The chamber enables temperature and humidity testing over a wide range and is designed for continuous operation in industrial and development laboratories. Particularly suitable for: Dujdpfx Afsyyu Rqj Sjr - Functional and lifetime tests - Material and component testing - Pre-aging and climate simulation - Conditioning of samples - Testing of batteries and accumulators (e.g., lithium-ion) under defined climatic conditions (with the appropriate customer safety concept/BMS) Operation is via a modern S!MPAC® control system with web panel; programs can be stored and run automatically. The chamber was in operation until recently and is fully functional. General: Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Year of manufacture: 2019 Condition: used, functional CE marking: available Made in Germany Control System: S!MPAC® control Web panel / touch operation Program and time control possible Temperature & Climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10% to 95% RH Humidity accuracy: ± 5% Dimensions: External (W×D×H): approx. 3300 × 5000 × 2500 mm Internal (W×D×H): approx. 3000 × 2200 × 1500 mm Test chamber volume: approx. 10 m³ Media & Systems: Spray system: water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical Data: Mains connection: 3/N/PE, 400 V AC ±10 %, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Weiss Technik WK 10/40-80 climate test chamber Control system / web panel Operating manual (German) Type plate & documentation Condition: used Scope of delivery: (see pictures) (Subject to technical modifications and errors. All information is subject to change!) We are happy to answer further questions by phone.

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ESS B2 - *M 0--.10*, Star screen for screening materials such as soil, compost, wood chips, etc. Weight: 2,700 kg. Selectable screening size from 12 to 40 mm. Connection: 3-phase 400 V, 32 A, frequency 50 Hz, total power 11.25 kW. Throughput: 40 to 60 m³/h depending on material and screen size. Delivery time: approx. 14 weeks after order confirmation. Dusdpsirnrpofx Af Sor

Leto izdelave: 2024, obratovalne ure: 4 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H2,5TMNI, Universal Testing Machine H 2.5 TMNI L Please always include your email address. Mechanical Design: Single-spindle universal testing machine with backlash-free recirculating ball screw in C-frame construction, equipped with spindle protection and brushless drive motor, Fmax = 2.5 kN. 1 Test Space up to Rated Load: Working depth: 105 mm Maximum test stroke without test tools, adapters, and KMZ: 1375 mm Dusdpfxsmdn Tro Af Ssr Maximum test area height (between lower fixed and movable crosshead) without test tools, adapters, and KMZ: 1375 mm Travel Speeds: Testing speed 0.005 - 1200 mm/min up to rated load Return speed 1200 mm/min Force Measurement: Measurement range depending on the force transducer used: 0.4 - 100% of the rated load, class 1 (optional class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of force measurement depending on integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If a factory or DAkkS calibration at the installation site is required by the customer, this service is subject to an additional charge. Crosshead Travel Measurement: Incremental quadrature input with encoder monitoring, storage of crosshead position. Resolution of crosshead travel measurement:

Stanje: dober (rabljeno), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion Test Chamber for Salt Spray Testing Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (WxDxH1/H2): 1400x800x800/1020 mm Door opening dimensions (WxH): 1300x680 mm External housing dimensions (WxDxH): 2162 x 995 x 2080 mm Operating temperature range: 5°C above ambient up to +80°C Heavy-duty configuration for loads up to 350 kg Process control: Beckhoff PLC, color touch screen display, 50 program memory slots, 50 segment memory slots, ramps: humidity/temperature control across the entire working range, Ethernet interface Dusdpfot Igc Ssx Af Ser Electrical connection: 400 V, 50 Hz, 5700 W Mains water: min. 2.5 bar, 3/4" tap connection, external thread for connecting an ion exchange cartridge Compressed air: 7-8 bar Wastewater: siphon / 30 mm ID hose nozzle Exhaust: pipe end OD 75 mm Operating modes: Salt spray Condensation (CWC) Ambient air ventilation Heated air Controlled humidity

Leto izdelave: 2023, obratovalne ure: 5 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Universal Testing Machine H5TMCI, 250 mm Extended Dsdpfx Afjmdpafs Sjur Mechanical Design: - 2 backlash-free ball screw spindles, driven by AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm - 1 test area up to rated load: - Working width: 420 mm (optional extensions: +190 mm / +330 mm / +620 mm) - Maximum test stroke without test fixtures, adapters, and KMZ: 1025 mm (optional extensions: +250 mm / +500 mm) - Optional: Conversion to floor-standing model, required additional assembly: base table Travel Speeds: - Test speed: 0.001 – 2000 mm/min at full load - Return speed: 2000 mm/min Force Measurement: - Measuring range: within 0.4 – 100% of rated load, Class 1 (optional Class 0.5) - (±1% of displayed value according to DIN EN ISO 7500-1) - Force measurement resolution: ±180,000 digits at 20 ms integration time The machine is delivered with a factory test certificate. Should a factory or DKD calibration at the installation site be required by the customer, this will be charged separately. Crosshead Travel Measurement: - Incremental square-wave input with encoder monitoring, storage of crosshead position - Crosshead travel measurement resolution:

Leto izdelave: 2020, stanje: zelo dobro (rabljeno), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss Climate Test Chamber ClimeEvent, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: Designed for a maximum load of 250 kg Technical specifications for temperature tests: Temperature range: -55°C to +180°C Temporal temperature fluctuation at center of test space: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Maximum heat compensation: 8000 W Technical specifications for climatic tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Dedpfx Aow R Rt Iof Seur Climatic performance data (excerpt) Humidity range: 10 to 98% relative humidity (r.h.) Temporal humidity deviation: At center of test space, under stabilized conditions, depending on climate value: ±1 to ±3% r.h. Temporal temperature deviation: At center of test space, under stabilized conditions, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to set value (in range > 20% r.h.): ±0.5 to ±1 K Operating data: LED strip 24 V, 6.8 W / 2 x halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with Greenmode Weight: approx. 2050 kg For your safety as the buyer, please note the following information! The following steps are carried out in advance on all our offered chambers: 1. Functional inspection and replacement of necessary components 2. If required, new charging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, a documented test run is performed. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors reserved!) If you have any further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Type: Weiss WT3-340/70 Very good condition Weiss temperature chamber with S!MCON / 32 controller, air-cooled (Refrigerant R-404A; can be converted to R452A upon request) Test chamber volume: approx. 335 liters Test chamber dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Operating data: Test chamber lighting: halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 12.5 A Rated power: 4.1 kW Djdpfxjv Edd So Af Sour Main fuse (on-site): 16 A slow-blow Sound pressure level approx. 58 dB(A) (measured at 1 m distance, 1 m height from front) Temperature testing data: Temperature range: -72 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature gradient (per IEC 60068-3-5): 1 to 4 K Temperature change rate (per IEC 60068-3-5): Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerants: R-404A / R-23 Weight: 585 kg For your safety as a buyer, please note the following information! The following points are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Recharge with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run with calibrated measuring devices. Condition: used / Sehr guter Zustand (very good condition)

Stanje: zelo dobro (rabljeno), Weiss Model: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Unit: Touchpanel All control and operating commands can be activated on the "Touchpanel" control unit by simply touching the function icons. Adjustable Feet To compensate for floor unevenness and to ensure sufficient ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is fitted with feedthroughs on the right and left sides. These allow measuring cables and test fixtures to be routed into the test chamber. Feedthroughs installed as standard: R1: Nominal Width 125 mm L1: Nominal Width 85 mm Volume: 335 liters Test Chamber Internal Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for Temperature Tests: Minimum Temperature: –72°C Maximum Temperature: +180°C Temperature Deviation, over time: ± 0.1 to ± 0.5 K Temperature Uniformity, spatial: ± 0.5 to ± 1.5 K Temperature Change Rate, Cooling: 3 K/min Temperature Change Rate, Heating: 3 K/min Data for Climate Tests: Temperature Range: +10°C to +95°C Dew Point Range: -3°C to +94°C Dsdpfxsv Sr Hzs Af Sjur Humidity Range: 10 to 98% r.h. Temperature Deviation, over time: ± 0.1 to ± 0.3 K Temperature Uniformity, spatial: ± 0.5 to ± 1 K Humidity Deviation, over time: ± 1 to ± 3% r.h. Operating Data: Test Chamber Lighting: Halogen bulbs 2 x 24V, 50W Rated Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Current: 16 A Rated Power: 4.9 kW Circuit Breaker (on-site): 16 A slow-blow Refrigerant: R-452A/R23 Weight: approx. 585 kg For your security as the buyer, please note the following information! The following items are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and information reserved!) Feel free to contact us by phone for further questions.

Stanje: zelo dobro (rabljeno), Here we offer a Binder incubator for sale. Key Features: Model BD 115 | Standard incubator with natural convection Technical Specifications BD 115 External Dimensions: Net width: 835 mm Gross height (including feet/casters): 705 mm Net depth: 645 mm Gross depth (including door handle and exhaust pipe): 750 mm Minimum rear clearance: 100 mm Minimum side clearance: 160 mm Exhaust pipe outside diameter: 52 mm Doors: Number of doors: 1 Internal Dimensions: Width: 600 mm Height: 480 mm Dusdsqzx Nnopfx Af Sjr Depth: 400 mm Internal volume: 115 liters Steam chamber volume: 142 liters Shelves: Number of shelves: 0 Maximum number of shelves: 5 Maximum load per shelf: 20 kg Permissible total load: 50 kg Weight: Weight (empty): 61 kg Temperature Data: Temperature range: 5°C above ambient temperature to 100°C Temporal temperature deviation: at 37°C: ± 0.1 K at 50°C: ± 0.1 K Spatial temperature deviation: at 37°C: ± 0.4 K at 50°C: ± 0.8 K Heating time: to 37°C: 70 minutes to 50°C: 90 minutes Recovery time after 30 sec door open: at 37°C: 10 minutes at 50°C: 12 minutes Electrical Data: BD115-230V IP 20 Nominal voltage (+/-10%) at 50 Hz mains frequency: 230 V Nominal voltage (+/-10%) at 60 Hz mains frequency: 230 V Current type: 1N~ Rated power: 0.20 kW Type: BD 115 Condition: used Scope of delivery: (see photo) (Specifications subject to change and error!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: SC/KWT 450 Salt Spray Chamber Technical data: Test chamber capacity: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Internal chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion testing: Dsdpfx Ajw Hz Trsf Sour Salt spray test: ambient temperature up to +50°C Condensation water test: ambient temperature up to +45°C Humidifier: +75°C Temperature stability Temporal temperature deviation: ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.