Drobilnik lesa Drobilnik

WEISS CR60

Stanje: kot nova (razstavni stroj), Leto izdelave: 2012, številka stroja/vozila: 925624, KUKA unused surplus stock KUKA VKR210 R2700 Year of manufacture: 03/2012 Payload: 210 kg Reach: 2700 mm Weight: 1412 kg Serial number: 925625 Includes connection cables: X21/X31 (00-108-948) 25 m and Kodpsrfch Usfx Adbend X20/X30 (00-104-744) 25 m Control cabinet KRC2 ED05, serial number: 93863 Weight: 203 kg Year of manufacture: 12/2012 Teach pendant 00-107-264 VKRC2, used, fully functional / Serial number: 0000562 Robot data: Repeatability: ± 0.06 mm Axis 1: ± 185° Axis 2: -140° / -5° Axis 3: -120° / 155° Axis 4: ± 350° Axis 5: ± 122.5° Axis 6: ± 350° Robot axis speeds in °/s: Axis 1: 105°/s Axis 2: 107°/s Axis 3: 114°/s Axis 4: 136°/s Axis 5: 129°/s Axis 6: 206°/s

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors. Kedevwlqqspfx Adbend

Stanje: novo, Leto izdelave: 2022, Power: 1.1 kW Drilling capacity steel / continuous drilling capacity: 30 mm / 25 mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle taper: MT-4 Drilling stroke: 120 mm Spindle reach: 254 mm Table size: 475 mm x 425 mm Drill table tilt/swivel: 45° left / 360° Kodpfx Adegulr Hsbjnd Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 132 kg

Stanje: rabljeno, številka stroja/vozila: 13292, Rotor diameter: 368 mm Rotor width: 1500 mm Ksdpfewmg Sgex Adbond Rotor knives: 82 Stator knives: 1 row Drive motor: 90 kW

Stanje: novo, Abmessungen: B2500 / L5250 / H2100 Kjdsu E Ezpopfx Adbjnd

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, moč: 37 kW (50,31 KM), skupna masa: 5.200 kg, large chopper, ideal for pallets or similar material built like a tank, weighs 5 tons Knsdpfx Asu Apkiodbod rotor width 1300 mm motor 37 kW feed stroke up to approx. 1.3 m to rotor with discharge auger

Stanje: dober (rabljeno), EINWELLEN-ZERKLEINERER WEIMA MODELL WLK15 HAUPTMOTOR 90 KW Kjdpfxotqd Ndo Adbond

Stanje: dober (rabljeno), Leto izdelave: 2014, Industrijski robot Proizvajalec: Kuka Tip: KR60L30-3 Leto izdelave: 2014 pribl. 15.600 ur Doseg: 2429 mm Teža: 665 kg Nosilnost: 30 kg Kuka upravljanje KRC4 Teža: 150 kg Programska oprema V8.3.40 Kuka zaslon na dotik Kuka priključni kabli Knsdpfxsn Uv Dis Adbsd 41125ä

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Inclined conveyor Transverse conveyor with crosscut saws automatic feed Edging saw HIT ASM 200 Max. cutting height: 130 mm; Cutting width unsawn: 750 mm; 3 variable blades Max.: 240 m/min HIT trimmer Kodpfx Ajvyqvdedbjnd

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2010, Gelenkteleskopska dvigalka JLG M 450 AJ Leto izdelave 2010 približno 970 delovnih ur Za dodatne informacije sem vam z veseljem na voljo po telefonu • Delovna višina 15,72 m • Delovno območje 7,89 m • Višina pregiba 7,70 m • Vrtljivost (ni neomejenega vrtenja) 360° • Kapaciteta platforme 230 kg • Rotacija platforme (hidravlična) 180° • Dolžina košare – skupna dolžina 1,24 m • Vertikalno delovno območje košare 144° (+84°/ -60°) S Kubota dizelskim motorjem za pogon generatorja Knodpfetz R Ufox Adbsd Trenutno stanje FEM 4.004 (UVV) pregled iz septembra 2025 Nakladanje na običajen tovornjak brez rampe s pomočjo viličarja ni težava Ponudba velja izključno za poslovne stranke po §14 BGB Ni prodaje fizičnim osebam.