Center stružnica

WEIPERT

Stanje: rabljeno, Leto izdelave: 1985, Swing diameter over bed: 810 mm Maximum swing diameter over cross slide: 560 mm Fsdpfexn Ty Rex Abvjfw Distance between centers: 00 mm Bed width: 480 mm Cross slide travel: 400 mm Top slide travel: 180 mm Turning tool shank cross-section: 32 x 25 mm Drive power: 22 kW Spindle torque: 30 Nm Spindle nose size: 11, DIN 55027 Spindle diameter at front bearing: 152.4 mm Spindle bore: 106 mm Speed range: 9 - 1800 rpm Number of speeds: 24 Longitudinal feed: 0.092 - mm/rev Cross feed: 0.046 - mm/rev Metric threads: 0.5 - 112 mm Inch threads: 1/4 - 56 TPI (G/1") Thread module: mm Thread DP: 1 - 224 pitch Tailstock quill diameter: 115 mm Quill stroke: 225 mm Quill taper: MK 6 Workpiece weight between centers, max.: 00 kg Workpiece weight, max. (unsupported): 750 kg Röhm 3-jaw chuck, Ø ... Machine dimensions approx.: 4600 x 1900 x 1600 mm Weight approx.: 4300 kg Number of feed and thread pitches: 99 Distance between centers: 00 mm Accessories: - 3-axis digital readout - Mobile chip guard along the entire length (plexiglass) - Coolant system - Rapid traverse in Z and X axes - Multifix toolholder, size C, with 6 interchangeable cartridges - Bed stop with micrometer adjustment - Fixed steady rest - 300 mm - Taper sleeve for main spindle MK 6 - Live center (cone center) MK 6 Bed guideways in very good condition!

Leto izdelave: 1965, stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations - operating manual available Fjdscubatepfx Abvofw

Stanje: dober (rabljeno), Technical Parameters Maximum Cutting Capacity Round: 650 mm Square: 650 x 800 mm Saw Blade Speed: 20–80 m/min Size: 54 x 1.6 mm Guides: Carbide and roller blade guides Cleaning: Wire brush and flood coolant Clamping: Hydraulic Motor Power Main Drive: 7.5 kW Hydraulic System: 2.2 kW Coolant Pump: 0.12 kW Fodpfx Asullzhjbvsfw

Stanje: novo, Leto izdelave: 2024, Working Range Centre Distance: 1000 mm Swing Diameter over Bed: 356 mm Swing Diameter over Cross Slide: 220 mm Bed Width: 206 mm Ffodpju Sklyefx Abvsw Travel X-Axis Travel: 178 mm Z1-Axis Travel: 92 mm Compound Slide Swivel Range: ±50° Main Spindle Speed Range, High: 550 rpm – 3000 rpm Speed Range, Low: 30 rpm – 550 rpm Spindle Mount: Camlock D1-4 Spindle Bore: 38 mm Spindle Taper: 5 MT Feed Feed X-Axis: 0.014 mm/rev – 0.206 mm/rev Feed Z-Axis: 0.043 mm/rev – 0.653 mm/rev Thread Cutting Metric Thread Cutting: (37) 0.4–7 mm Whitworth Thread Cutting: (28) 4–56 TPI Tailstock Tailstock Quill Diameter: 45 mm Tailstock Taper: 3 MT Tailstock Quill Travel: 120 mm Tailstock Offset: ±10 mm Drive Power Main Drive Motor Power: 4 kW Dimensions & Weight Dimensions (L x W x H): 1.95 m x 0.75 m x 1.55 m Weight: 880 kg

Stanje: rabljeno, MOSTANA STANKO 1M65-5 TEŽKI STRUŽNIK S SREDIŠČEM IZDELOVALEC: MOSTANA STANKO, IZDELANO V ZSSR MODEL: 1M65-5 LETO: SREDINA 80-IH PREMER OBRATA NAD POSTELJO: 1000,0 mm PREMER OBRATA NAD SANMI: 650,0 mm VELIKOST VPAČNIKA: 1000,0 mm Fjdpfxex Dmi De Abvsfw PREMER VRETENA: 135,0 mm OBRATI VRETENA: 5–500 o/min MOČ VRETENA: 22 kW DODATNO: AVTOMATSKI PODAJALNIK SANÍ METRIČNO IN COLSKO VREZOVANJE NAVOJEV 4-ČELJUSTNI VPAČNIK 1000,0 mm 2-OSNI DIGITALNI PRIKAZ ČISTA POSTELJA UPORABLJEN LE ZA KOMPOZITE, NE METALA

Stanje: dober (rabljeno), Weipert brusilni stroj za ročične gredi Weipert Brusilna stružnica Centrična konica: Röhm 110 H MK5 Dolžina stroja: 4300 mm Možno je tudi financiranje preko naše banke. komplett-konzept.leasingo.de Druge brusilne stroje v različnih velikostih – nove in rabljene – najdete v naši trgovini! Fjdpfxjihfrys Abvofw Mednarodni stroški pošiljanja na zahtevo!

Stanje: dober (rabljeno), Leto izdelave: 1967, LZ Lathe Manufacturer: WEIPERT TYPE: UD 500 e Year: 1967 Equipped with digital readout, compound rest feed, MULTIFIX tool holder size C, and Forkardt chuck 315 mm. Centre height: 250 mm Centre distance: 1500 mm Spindle bore: 65 mm Spindle speeds: 14 - 1400 rpm Fedpfx Abju Rd H Isvjfw The machine is in good condition.

Stanje: rabljeno, Leto izdelave: 2002, Swing diameter: 820 mm Ffedpow Dvipjfx Abvew Turning length: 2,000 mm Control: SIN 810 D Center height over flat bed: 400 mm Swing diameter over cross slide: 500 mm X-axis travel: 540 mm Z-axis travel: 2,100 mm Feed rate X/Z axis: 0.01 - 50 mm/min Rapid traverse X-axis: 5.00 m/min Rapid traverse Z-axis: 10.00 m/min Feed force, facing: 12,500 N Feed force, longitudinal: 20,000 N Spindle speeds: 6.4 - 1,600 rpm Spindle speed gearbox stage 1: 6.40 - 376 rpm Spindle speed gearbox stage 2: 27.40 - 1,600 rpm Drive power at 60% / 100% duty cycle: 46.00 / 37.00 kW Torque at 60% / 100% duty cycle: 5,073 / 4,069 Nm Constant cutting speed: 1 - 9,999 m/min Spindle nose to DIN 55027 - size 11 Spindle diameter at front bearing: 170 mm Spindle bore: 128 mm Tailstock quill taper: MT 6 Quill diameter: 125 mm Quill stroke: 280 mm Thread pitch: 0.1 - 400 mm Total power requirement: 35.00 kW Machine weight approx.: 11.00 t Space requirement approx.: 6.00 x 3.00 x H2.60 m Controls: SIEMENS Sinumerik 810D, chip conveyor, tailstock, extraction system, 2 steady rests. Spindle bearing refurbished by the manufacturer in 04/2023. Machine can be inspected under power.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, SPECIFICATION KB-45 Cutting capacity: 455 mm Maximum working height: 255 mm Table: 600 x 500 mm Tilt: 4-way up to 15° Saw blade length: 3490 mm Saw blade width: 3–16 mm Saw blade speed: 25–115 m/min Butt welder capacity: 3–16 mm Motor size: 1 HP Weight: 285 kg Height: 2020 mm Width: 1100 mm Depth: 660 mm STANDARD FEATURES Overload switch Single-phase/three-phase power supply Integrated saw blade and wheel cleaning brush Saw blade welding device, blade shear and grinding machine Grooved table Low-voltage halogen lamp Mitre guard for angled cuts Ffsdou Rdr Ropfx Abvew Quick-release rip fence for straight cuts

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Razdalja med konicama: 750 mm Premer struženja nad posteljo: 430 mm Ffedpfx Ajycrwfsbvsw Vretenina odprtina: 42 mm 24 hitrosti: 14 - 1400 vrt/min Pogonska moč: 5,5 KM Teža cca: 2 t Oprema: lyneta, Multifix, Forkardt-patrona Stanje: Stroj deluje dobro; vzdolžno vodenje ni več v dobrem stanju. Stroj je ugoden in primeren le za enostavnejša dela.

Leto izdelave: 1940, stanje: rabljeno, Automatic universal gear hobbing machine for the production of spur gears and worm wheels. Maximum hobbing diameter: 120 mm Minimum hobbing diameter: 5 mm Minimum gear module: 0.30 Ffjdpfx Ajkw T Rmebvsw Maximum gear module: 2 mm Maximum hobbing length: 100 mm Supplied complete with all accessories.

Leto izdelave: 1967, stanje: rabljeno, Lathe Manufacturer: Weipert Model: W500 Swing diameter: 500 mm Turning length: 1000 mm Fedpsh Rwklefx Abvsfw

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 102 mm, višina središča: 400 mm, stružna dolžina: 2.000 mm, 26 hitrosti vrtenja od 4,5 do 1400 min⁻¹ - pogonjen zgornji suport - hitri pomik - vpenjalna glava Forkardt 400 mm Ffedpfex U Dxyox Abvjw

Stanje: rabljeno, Leto izdelave: 1977, Surface grinding machine, manufacturer Okamoto, model PSG-63 UA, year 1977. Magnetic chuck: 600 mm x 300 mm. Grinding capacity: longitudinal 630 mm, cross 310 mm, height 350 mm. Ffjdpfx Asiz Tmkobvjw Ready for operation.

Stanje: rabljeno, Leto izdelave: 1953, WEIPERT Lead and Feed Screw Lathe WEZ * Due to changes in our business operations within the manufacturing sector and a production reorganization, we are selling a WEIPERT Lead and Feed Screw Lathe WEZ at short notice. * The machine was partially overhauled in 1982. * Year of manufacture: 1953 Serial number: 13867 Three-jaw chuck: d 400mm Swing over bed: 800mm Distance between centers: 2,500mm Spindle bore: 90mm Tailstock: Yes Machine weight: approx. 5,500 kg * A comprehensive range of accessories is available as an option. * Ffjdpfx Abox R Tnvjvow IMPORTANT: For logistical reasons, we are selling exclusively within Europe. The buyer is responsible for removal, loading, and transport. * "The seller excludes any warranty for the purchased goods. The goods are sold as seen, without any guarantee of fitness for a particular purpose or freedom from defects. The buyer confirms that they have inspected the goods prior to purchase and are satisfied with their condition. The seller accepts no liability for any damages arising from the use of the goods. Any claims against the seller by the buyer are excluded." * Status: 02.02.2026 * Price: €8,500 negotiable / plus VAT Prices are net, plus value added tax. * If you have any questions or require further information, please feel free to contact me. *