Optimizacijska prečna žaga Weinig OptiCut 260

Weinig OptiCut 260

Leto izdelave: 2023, Stanje: novo, In the area of 3D thermoforming, we also offer presses, turners, foil carousel storage systems, and brushing machines on Machineseeker! MEMBRANES for membrane presses – made of silicone or natural rubber Top-quality and suitable for all membrane presses (foil and veneer presses). You can purchase our membranes either pre-cut to your required dimensions or as roll stock. SILICONE Type: MS-2 Colour: milky white Surface: fabric-patterned/smooth Standard widths: 1680/2000 mm Polymer base: silicone Shore hardness: 50° Shore Thickness: 3 mm Operating temperature: min. -50°C / max. 200°C SILICONE Type: MS-1 Colour: milky blue Surface: smooth Standard widths: 1600/1800 mm Polymer base: silicone Shore hardness: 45° +/- 3° Shore Thickness: 2 mm Operating temperature: min. -60°C / max. +230°C NATURAL RUBBER Type: MNK-2 Colour: grey Surface: smooth/fabric-patterned Standard widths: 1700–1750 and 2000 mm Rubber: natural rubber Shore hardness: approx. 42° Shore Thickness: 2.5 – 4.0 – 5.0 mm Operating temperature: min. -20°C / max. +130°C NATURAL RUBBER Two-layer version for waterbed/oil presses Type: MNK-2 WB Colour: grey/black Surface: both sides smooth Standard width: 1700 mm Rubber: natural rubber Shore hardness: approx. 42°/60° Shore Thickness: 3.5–4 mm Operating temperature: max. 130°C Standard SILICONE Type RSS Colour: red-brown or transparent (other colours available upon request) Surface: both sides smooth Standard length: cut to size or 10 m rolls (other lengths available on request) Standard width: 1200 mm (up to 1800 mm available on request) Polymer: silicone Shore hardness: 30°–80° Shore Thickness: 0.5–10 mm Nwjdpfed S Efasx Adyjb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Žaga je naprodaj. Linck linija je opremljena z novo avtomatizacijo finskega podjetja OT-Laite, izdelano leta 2016. Hitrost Linck linije je 100-120 m/min. Upravlja jo en operater. Linck EV45 vstopna obračalna naprava Chipper canter 1 Linck VM 50 Nwsdoxg Ubyspfx Adyob Chipper canter 2 Linck VM 50 Skaner pred profiliranjem Lisker Profiscan / Seecon / ProfiTC, avtomatizacija je iz leta 2016. Na voljo je soba z vso potrebno opremo za brušenje Profilirna skupina 1 Linck VPF340, za 2 + 2 stranski deski Linck stranska žaga/krožna žaga, 4 vretena Mehanizacija za odstranjevanje stranskih desk Profilirna skupina 2 Linck VPF 340, za 2 + 2 stranski deski Linck večlistna žaga, maks. višina reza 285 mm Transport do sortiranja lesa Kapaciteta: 400 m³ razrezanega lesa v 8 urah. Linija je na 500 V in vključuje transformator.

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: KME 2/750L, Clamping carriage for saw frame Inspection possible by appointment. Nwjdpfov Umb Eox Adyjb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, dolžina pomika po osi Y: 6.000 mm, Tipper bed for logs up to 6 m long. Nodpfjr Iig Dox Adyowb Available from September 2024.

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), This is a complete plant for house construction. The prices are listed for each item. Consisting of the following individual components (see attached document): Pictures will follow and are already included in the attached document. Table 1 (Insertion and clamping of the frame work) €34,500 - Height-adjustable longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity Table 2 (Laying and securing the first sheathing) €25,300 - Longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity Intermediate Transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Njdou D Amgjpfx Adyewb Table 3 (Laying and securing the second sheathing, turning of the element onto the next table) €35,650 - Longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Installation of electrical and insulation) €34,500 - Cross transport with rollers and paneling - Cross travel of the table - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Laying the first sheathing and securing the second side) €32,775 - Longitudinal transport with 3 hinge conveyors - Cross transport with rollers - Pneumatic transverse clamping - Connections for compressed air and electricity Intermediate Transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 6 (Laying and securing the second sheathing) €28,750 - Longitudinal transport with 3 hinge conveyors - Pneumatic transverse clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal transport with 3 hinge conveyors - Hydraulic swinging unit - Table cross-travel unit - Upper guide for holding the walls vertically Manual area gantry with vacuum lifter on Table 2 €13,800 (Laying the first sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 3 €13,800 (Laying the second sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 5 €13,800 (Laying the first sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 6 €13,800 (Laying the second sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Wall rack 1: 12 m long x 24 bays €11,500 Wall rack 2: 12 m long x 20 bays Vacuum lifter with column slewing crane €9,200 1 Spreader beam 2 t Abus €20,125 1 Spreader beam 2 t

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Drying Paternoster for Finger-Jointed Boards Consisting of: - Transfer chain after finger jointing press, foldable Njdpfx Adjwclkysyjwb - Drying paternoster approx. 7 m, suitable for board lengths up to 6 m - Cut-off and zeroing saw - Conveyor belt for residual wood disposal - Stacking system - Batten magazine is not for sale - Package cross conveyor The machine is in very good condition, very little operating time. The machine is still assembled but immediately available.

Stanje: pripravljen za uporabo (rabljen), For sale is a complete round timber handling line with long timber infeed, Nicholson A6/35" debarker, and Baljer Zembrod OBX V-24 with up to 200 m of rail. Nsdpfx Aswxndnedyjwb

Stanje: zelo dobro (rabljeno), Olupilnik okroglega lesa VK450 2RE. Opremljen z dvema rotorjema. Eden je rotor za frezanje štorov. Drugi je luščilni rotor. Min–maks premer lesa 8–45 cm. Minimalna dolžina lesa 3 m. V kompletu z originalnim VK centrirnim transporterjem. Bo prodan po generalnem remontu. Nwodoulv Hzjpfx Adysb

Stanje: skoraj kot novo (rabljeno), Min. input length: 500 mm, max. 6 m. Cross-section: max. 140 x 250 mm Motor: 5.5 kW Saw stroke: servo swing arm Feed via rollers, 6 top, 6 bottom Nwjdpfx Asr A Et Tedyob CNC control Maxi 8.0 1 x sorting unit, each 11.5 m Machine will be configured according to your requirements.

Leto izdelave: 2000, Stanje: dober (rabljeno), Ravnalna linija EWD Combimes. Leto izdelave 2000, tip DK90-TL. Dovod lesa z leve strani. Maksimalna širina obrezovanja 500 mm, maksimalna debelina 120 mm. Pogonski motor 90 kW. Cikel pri dolžini lesa 4,0 m je približno 18 kosov/min. Popolna z originalnim EWD krmiljenjem. Dobava vključuje zalogovni transporter pred razdeljevanjem do ločevalnika odrezkov. Linija je popolna in v dobrem stanju. Nedpfexcwvxsx Adyewb