WEIMA WL 6 SS sekalnik za sekanje lesa pod peleti

Weima WL 6 SS

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The Brugger PX130 wood chipper is powered via the tractor's PTO and is capable of processing logs with a diameter of up to 13 cm. Hedpfjrblwdsx Af Tjng Its robust construction and high-quality materials ensure reliable performance. Technical specifications: - Hydraulic feed - Diameter up to 13 cm - Weight: 420 kg - PTO speed: 540 rpm - Required tractor power: 30–70 HP Equipped with hydraulic feed, it offers an efficient solution for wood processing in various agricultural and forestry applications. Contact us for a customised quotation!

Leto izdelave: 2019, Stanje: kot nova (razstavni stroj), Aluminium flat conveyor belt including substructure. Dimensions: 6000 + 620 x 105 mm Conveyor belt width: 500 mm PVC conveyor belt with cleats, sidewall, and sealing tape included. V2A stainless steel feed hopper at the beginning of the conveyor belt. * Optionally available with magnetic deflection roller at the end of the conveyor belt. Hodpod Ra Uasfx Af Tong * Optionally available as an incline conveyor. * Custom designs in all configurations possible.

Leto izdelave: 2024, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The copper wire granulator can recycle scrap copper wire into separated copper and plastic. The processing capacity is 100–180 kg/h, and the dry mechanical shredding process causes no environmental pollution. For sale is the granulator, including a pre-shredder and a conveyor belt with magnet. Design and Manufacturing 99.99% Outstanding Efficiency and Reliability, Advanced Technology: ● Airflow gravity sorting system for separating copper particles from insulation. ● Powerful vibrating separator to ensure clean separation of copper granulate from insulation by weight. ● Self-cleaning dust collection system to minimize maintenance time and eliminate dust. ● Compact design with a small footprint. ● 99.99% pure copper recovery rate ● High reliability ● High productivity ● Robust and versatile ● Long service life ● Cost-effective Technical Specifications Model: GRS 180KG Voltage: 380V Power: 8.7 kW Hnedju Tq S Hopfx Af Tjg Frequency: 50 Hz Processing capacity: 100-180 kg/h Dimensions: 80*137*204 cm Net weight: 518 kg

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Operating Software: Manual input of stock length Partial optimization without length reading of the board Hedpehw Ng Ijfx Af Teng Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit

Stanje: zelo dobro (rabljeno), Kataloška številka 6726 Hnodpfx Ajignt Usf Tjg TEHNIČNI PODATKI - Vhod lijaka za polnjenje: 280x300mm - Izhod za zdrobljen les: premer 310mm - Delovna širina rotorja: 340mm - Glavni motor: 22kW - Število nožev: 6 kosov - Dimenzije (d/š/v): 1300x1150x1680mm - Teža: 720kg PREDNOSTI – Zelo dobro stanje – Rabljen sekalnik Neto cena: 19.900 PLN Neto cena: 4.740 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (pri večjih valutnih nihanjih se cena lahko spremeni)

Stanje: rabljeno, številka stroja/vozila: 13292, Rotor diameter: 368 mm Rotor width: 1500 mm Rotor knives: 82 Stator knives: 1 row Hnedpfx Afswmg Sge Tjg Drive motor: 90 kW

Stanje: zelo dobro (rabljeno), HSS saw blade grinding machine VOLLMER model CMS 10M Hnedpfxei Hchde Af Tjg

Stanje: novo, Leto izdelave: 2024, ♻ Univerzalna uporaba (les razni, palete vključno z žeblji in sponkami, iverne plošče in ostanki, furnirji, MDF-plošče, karton, plastika …) ✔ Moč: 18,5 kW ✔ Dolžina rotorja: 870 mm ✔ Premer rotorja: 270 mm ✔ Hitrost rotorja: 80-120 rpm Hnjdpfxjhzlr Ie Af Teg ✔ Število nožev: 2x19 ✔ Granulacija: 10-50 mm ✔ Kapaciteta: do 7 m3/h* ✔ Odprtina za ekstrakcijo: 200 mm ✔ Vsipna odprtina: 1446 x 1565 mm ✔ Dimenzije D/Š/V: 2,15/1,97/2,04 m ✔ Teža: 2050 kg 2 leti garancije ali 2000 delovnih ur

Stanje: generalkompletno obnovljen (rabljeno), REKORD 400 MODIFIED WITH TANK AND COOLING SYSTEM SHARPENING MACHINE FOR TUNGSTEN CARBIDE AND HSS CIRCULAR SAWS (FULLY OIL-BASED OPERATION) Hnedsh A N R Sepfx Af Tog FEATURES Grinding wheel diameter: 150 mm Grinding wheel motor: 1 HP 0.25 HP feed motor for grinding carriage Cooling system indicator (Oil bath) Electronic cam reading system (SLOW CONTROLLED BACK FINISHING) Magnifier lamp (FOR SMALL TEETH) Sharpening speed electronically adjustable via potentiometer Manual bevel angle adjustment using scale rod No. 1 copy wheel No. 1 diamond wheel, diameter 150 x 4 - 60° No. 1 bakelite wheel for HSS Minimum blade diameter: 30 mm (with small blade holder on request) Maximum blade diameter: 400 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, obratovalne ure: 6.070 h, Jenz BA 965 DL Titan - Year of manufacture: 2018 - Operating hours: 6,070 - Engine: Mercedes MTU, 630 HP Hjdpfx Aexmvn Iof Tsng - AdBlue - Remote control - Hydraulic drive (self-propelled) - Weight: 25,000 kg The machine has been workshop overhauled and is immediately available.