Mehanska stružnica

WEILER MD 260p

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Centre distance: 1000 mm Spindle speeds: 11.2 – 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev – 32 steps Cross feeds: 0.02 – 0.71 mm/rev – 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Approx. machine dimensions (LxWxH): 3.3 x 1.2 x 1.6 m Isdev A Sqhepfx Agpsa The machine is in very good condition (very quiet spindle operation) and available ex location Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for speeds up to 2000 rpm. Thread cutting: metric, module, imperial Chip guard Chuck guard (mechanical) MULTIFIX toolpost with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection Machine feet UVV (accident prevention regulation) pre-installed *

Stanje: novo, Bernardo Lead and Feed Screw Lathe Master 180 incl. 3-axis digital display Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Isdpjd Du Tijfx Agpsa Swing diameter over gap*: 480 mm Swing diameter over cross slide: 220 mm Bed width: 185 mm Spindle bore: 51 mm Spindle mount: DIN 55029, D1-5 Speed range: (8 steps) 70 - 2000 rpm Longitudinal feed range: (32) 0.052 - 1.392 mm/rev Cross feed range: (32) 0.014 - 0.380 mm/rev Metric threads: (26) 0.4 - 7.0 mm Imperial threads: (34) 4 - 56 TPI Tailstock quill diameter: 42 mm Tailstock quill travel: 110 mm Tailstock taper: MT 4 Motor output S1 100%: 1.5 kW (400 V) Motor rating S6 40%: 2.2 kW (400 V) Machine dimensions (L x W x H): 1920 x 750 x 1600 mm Weight approx.: 540 kg * Removable bed section: 225 mm Scope of delivery • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, acc. to DIN 55029 • Fixed steady rest – max. passage diameter 70 mm • Follow rest – max. passage diameter 50 mm • Coolant system • Initial filling with Shell Tellus 46 • Extendable chip tray • Clamping plate 320 mm • 4-way tool post • Protective device for 4-way tool post • Safety clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 centres • Foot pedal with brake function in accordance with CE • Motor with magnetic brake according to CE standard • Machine base

Stanje: rabljeno, Swing over bed: 250 mm Iedpswa Dz Esfx Agpsa Swing over cross slide: . mm Distance between centers: approx. 400 mm Center height: approx. 125 mm Speed range: 80 - 3000 rpm Number of speed steps: 18 Spindle bore: 24 mm Tailstock quill taper: MT 3 Weight: approx. 400 kg Dimensions: approx. 1200 x 650 x 1300 mm Four-jaw chuck diameter: 125 mm Including Röhm four-jaw chuck, Ø 125 mm, with drilling and turning jaws; Collet chuck with collets 1-20 mm in 1 mm increments; Multifix size A with 3 tool holders; Chuck guard with safety interlock

Stanje: dober (rabljeno), Leto izdelave: 2010, LZ Lathe, Manufacturer: JET, Model: GHB-1330, Year of manufacture: 2010 Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix tool post size A, 2 steady rests, and coolant system. Swing over bed: 330 mm Swing over cross slide: 197 mm Centre distance: 750 mm Spindle speeds: 70–2000 rpm Ijdpoqwgzqofx Agpoa Spindle bore: 38 mm The machine is in good condition, coming from a training workshop. Machine documentation is available.

Stanje: novo, New lathe with large spindle bore. Brand: KMS Model: CS6250C Centre distance: 1000 mm Swing over bed: Ø 500 mm Swing over cross slide: Ø 300 mm Swing in gap: Ø 710 mm Turning length in gap: 240 mm Bed width: 390 mm Spindle bore: Ø 105 mm Spindle speeds: 12 steps (36 - 1600 rpm) Tailstock quill diameter: 75 mm Tailstock travel: 150 mm Tailstock taper: MT 5 Machine dimensions: approx. 2630 x 975 x 1270 mm (L x W x H) Machine weight: approx. 2100 kg Machine equipped with: - Longitudinal and cross feed - Rapid traverse in both longitudinal and cross feed - Movable and adjustable stops for automatic longitudinal feed - Leadscrew for threading (metric/inch/module/DP threading possible) - Quick-change tool post, type Multifix - 2-axis digital readout (Brand: Sino) - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock) Isdpfxohhm Edo Agpja - 4-jaw chuck Ø 400 mm, bore 105 mm (Camlock) - Faceplate Ø 630 mm (Camlock) - Steady rest Ø 120–260 mm - Follower rest Ø 20–80 mm - Coolant system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 98 h, Krmilna enota Znamka: FANUC Model: Series-31i Glavni pogon Območje vrtljajev vretena: 10000 Mediji Transporter ostružkov: Da Dodatna oprema Izvlečevalnik oljne megle Ta 5-osni FANUC ROBODRILL α-D21LiB5 je bil izdelan leta 2018. Idealen za precizno obdelavo, ta vertikalni obdelovalni center zagotavlja zanesljivo delovanje. Razmislite o nakupu tega FANUC ROBODRILL α-D21LiB5 vertikalnega obdelovalnega centra. Za več informacij nas kontaktirajte. Iedsw Irmdopfx Agpoa Vrste uporabe Rezkanje

Stanje: potreben popravila (rabljeno), Machine number: 1464 Type / Model: FUW 250/IV Iedpfx Aged Hl Stepea Travel paths x-y-z: 400 - 220 - 400 mm Table size: 630 x 350 mm Clamping area of table: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle taper: SK 40 Longitudinal feed rate: 6.3 to 1,250 mm/min Cross feed rate: 6.3 to 1,250 mm/min Power supply: 7.4 kW Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Stanje: rabljeno, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Ijdpfx Agertd Uwjpoa Feed: longitudinal and cross Chuck flange: short taper DIN 55022 Size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert cartridge - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centring tip for collet chuck - Emergency stop - Folding chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (Steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stanje: novo, WM210V - ROGI VARIO METAL LATHE 230V-1Ph Swing over bed: ----- 210 mm Swing over cross slide: ----- 110 mm Centre height: ----- 105 mm Distance between centres: ----- 400 mm Bed width: ----- 100 mm Cross slide travel: ----- 75 mm Compound slide travel: ----- 55 mm Spindle bore: ----- 21 mm Spindle mount: ----- MT3 Spindle speed range: ----- variable 50 - 2500 rpm Iedpjga Txcofx Agpoa Thread cutting imperial: ----- 10 - 44 TPI (8) Thread cutting metric: ----- 0.5 - 3 mm (10) Quill travel: ----- 60 mm Quill diameter: ----- 30 mm Quill taper: ----- MT2 Motor power: ----- brushless 600 Watt Weight: ----- 75 kg STANDARD ACCESSORIES * 3-jaw 100 mm chuck - self-centering * 4-way tool post * Chip tray * Rear splash guard * Chuck guard * Leadscrew cover * Tool post guard * Change gear set * Digital speed display * Fixed centres * Forward / Reverse switch * Toolkit in case OPTIONS * 4-jaw 100 mm chuck - independent * Flange for 4-jaw 100 mm chuck * Fixed steady rest WM210V * Travelling steady rest WM210V * Faceplate WM210V * Stand/cabinet WM210V

Stanje: zelo dobro (rabljeno), Univerzalni stružnica, stružnica, stružniška postelja, vodilno-vijačna stružnica -Proizvajalec: WEILER, vodilno-vijačna stružnica tip commodor 42 Isdexapm Rjpfx Agpoa -Stružniško ležišče: kaljeno -Dolžina struženja: 900 mm -Premer struženja nad ležiščem: 400 mm -Premer struženja nad suportom: 190 mm -Vrtina vretena: Ø 56 mm -Vrtilna hitrost vretena: 45 - 2000 rpm -Trivočna glava: Röhm Ø 200 mm -Štirivočna glava: Röhm Ø 200 mm -Konus konjička: MK3 -Pogonska moč: 4 kW -Dodatna oprema: 18x Multifix nosilec orodja, vrteča konica, glejte slike -Dimenzije stružnice: 2200/1300/H1410 mm -Teža: 1380 kg