Center stružnica

Weiler E40

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, obratovalne ure: 2.100 h, premer struženja nad prečnim suportom: 200 mm, izvrtina vretena: 66 mm, premer struženja nad ležiščem sani: 435 mm, višina središča: 217 mm, stružna dolžina: 1.000 mm, skupna dolžina: 3.061 mm, največja hitrost vretena: 3.500 obr/min, hitrost vretena (min.): 1 obr/min, širina postelje: 202 mm, Za prodajo: precizni stružnica WEILER E40 – zgolj 2100 ur obratovanja, stanje stroja kot novo. Ima 435 mm premera obratovanja nad posteljo, 200 mm nad prečnim suportom, 66 mm vreteno izvrtine in 1000 mm dolžino struženja. Idealna izbira za delavnice, ki zahtevajo natančnost in vzdržljivost. Kontaktirajte nas za ceno in podrobnosti! Pjdpfx Agjv A Irzepord

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Pjdpfx Agsrn Riqoperd Table height: 900 mm Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2013, Cycle-Controlled Lathe WEILER E 40 With Siemens Sinumerik Cycle Control WEILER 840 D /SL 1 Year of manufacture: 2013 Spindle bore: 66 mm Centre distance: 1000 mm Swing over bed: 435 mm Swing over cross slide: 200 mm Centre height: 210 mm Prjdpfxowfm Tbe Agpjd Speed range: 1 – 3,500 rpm, infinitely variable Comes with the following accessories: Safety sliding guard with interior lighting 8-position SAUTER turret 3-jaw chuck RÖHM Ø 200 mm Tailstock with extendable quill Coolant system Coolant spray gun Chip collection tray 5 height-adjustable machine feet Operating manual

Stanje: zelo dobro (rabljeno), Odlično stanje, redno vzdrževano (računi na voljo), veliko dodatne opreme! Podpfexw D S Aex Agpsrd

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 250 mm, dolžina podajanja os Z: 160 mm, potovalna razdalja osi X: 500 mm, pomik osi Y: 250 mm, pomik po osi Z: 480 mm, največja hitrost vretena: 9.000 obr/min, hitrost pomika os X: 2 m/min, hitrost podajanja osi Y: 2 m/min, hitrost podajanja os Z: 1 m/min, hitrost vretena (min.): 100 obr/min, poteza s peresom: 160 mm, širina mize: 320 mm, dolžina mize: 880 mm, X-500, Y-250, Z- spindle stroke 160, W- machine head travel 480, table 880 x 320, max. 320 kg, SK 32 spindle taper, 100-9000 rpm, 5 kW, 60 Nm, Heidenhain TNC 124 control. Extensive accessories included. Prodpfx Ajq R Rb Hogpjd

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2013, Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of manufacture: 2013 Spindle bore: 66 mm Distance between centres: 1000 mm Predpfjvkd Inox Agpsd Swing Ø over bed: 435 mm Swing Ø over cross slide: 200 mm Centre height: 210 mm Speed range: 1 – 3500 rpm, stepless Supplied with the following accessories: Sliding guard with interior lighting Multifix tool holder with 8 inserts 8-position SAUTER turret with AGW and driven tools C-axis via main drive 3-jaw chuck Schunk ROTA plus Ø 250 mm 5 sets of soft top jaws, 1 set of hard top jaws Tailstock with extendable quill Reinforced coolant system, 5.5 bar Coolant spray gun Chip collection tray 5 height-adjustable machine feet Operating manual

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, stružna dolžina: 1.000 mm, premer struženja: 570 mm, premer struženja nad zgornjim sanežem: 340 mm, premer tulec: 80 mm, hod vretena: 200 mm, skupna masa: 3.200 kg, zunanji premer vpenjalne glave: 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine is in very good condition. Prsdjwxw S Ijpfx Agpsd Available immediately! Can be tested under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8044000703A, Siemens 840 D control Country of manufacture: EU – Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip tray) 4228x2260x1775 mm (with chip conveyor) Net machine weight: 3400 kg TECHNICAL SPECIFICATIONS CTX 310 ecoline V1/V3 New Design Working capacity Swing over bed: 330 mm Swing over cross slide (X): 260 mm Maximum turning diameter: Ø 200 mm Chuck diameter: Ø 210 mm X-axis travel: 182.5 mm Z-axis travel: 455 mm Centre height: 190 mm Distance between centres: 581 mm Feed drive Rapid traverse X and Z axes: 30 m/min Control: Siemens Sinumerik 840D Slim Line C-axis with Siemens control Speed: 0 – 100 rpm Torque: 112 Nm Accuracy: < 0.04° Spindle Spindle nose: 140 h5 mm Front bearing diameter: 100 mm Spindle bore: Ø 74.3 mm Bar capacity: 51 mm Pedsw T Sqyjpfx Agperd Main drive with Siemens control Drive power (40% / 100% duty cycle): 16.5 / 11 kW Torque (40% / 100% duty cycle): 166.5 / 112 Nm Max speed: 5,000 rpm Tool turret Number of tool stations: 12 Tool holder: DIN69880 (VDI 3425) Turret disc diameter: 30 mm Tool change (with locking): 0.95 sec Tool change (without locking): 0.4 sec Powered turret with Siemens control Number of driven tools: 12 Drive power (40% duty cycle) at 4000 rpm: 8.4 kW Torque (40%): 20 Nm Max speed: 4,500 rpm Tailstock Automatic movement: 396 mm Quill bore: flange Maximum quill axial force: 400 daN Hydraulic unit Tank capacity: 50 L Maximum pressure: 50 bar Cooling system Tank capacity: 175 L Capacity with conveyor: 200 L Pump power: 0.85 kW Pump flow at 5 bar: 30 L/min Electrical connection Maximum power: 21 kVA Current: 400V Frequency: 50–60 Hz Fuses: 33A Pneumatics Compressed air connection: 6 bar Environmental conditions Ambient temperature: +15 to +35°C Maximum humidity: 75% Unless otherwise stated, the technical information is provided without guarantee of accuracy or completeness.

Leto izdelave: 2017, Stanje: pripravljen za uporabo (rabljen), Laser power: 10kW (10,000W), Working area: 3000mm x 1500mm, Maximum material thickness: Mild steel: 25mm, Stainless steel: 30mm, Aluminium: 30mm, Copper: 12mm, Brass: 15mm. Positioning speed: 120m/min, Positioning accuracy: +/-0.05mm, Maximum workpiece weight: 1,100kg. Machine dimensions (X/Y/Z): approx. 9500mm x 3500mm x 3500mm, Extraction unit dimensions (X/Y/Z): approx. 1500mm x 1500mm x 4000mm, Machine weight: approx. 12,000kg, Operating hours: approx. 17,000h. Documentation available. On-site inspection possible. Expected to be available from June 2025. Pedpsvyiqgefx Agpjrd

Stanje: dober (rabljeno), G Webb Automation MiniFill vijčni dozirnik za doziranje na tehtalno ploščad. Odličen za pakiranje praškov, granul, kave ipd. v vrečke. Pedpfx Agem Sg Hceperd