Dvojna poševna žaga

Wegoma DS140

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Zum Verkauf steht eine komplette Produktionslinie für PVC-Fensterbau (Kunststofffensterfertigung) der Marke URBAN, bestehend aus: 1. Zwei-Kopf-Schweißautomat; Hersteller: URBAN, Modell: AKS 5305-FF, Seriennummer: 53372, Baujahr: 2007, in einwandfreiem Betriebszustand. 2. Nutfräsmaschine; Hersteller: URBAN, Modell: WS 103, Seriennummer: 790, Baujahr: 2007, in einwandfreiem Betriebszustand. 3. Zweikopf-Gehrungssäge; Hersteller: RAPID, Modell: DGS 100, Seriennummer: 004606128, Baujahr: 2010, wird zusammen mit Spänesauger mit Filtersäcken verkauft, in einwandfreiem Betriebszustand. 4. Armierungssäge (Stahltrennsägemaschine); Hersteller: MACC, Modell: NEW 275, Seriennummer: 88266, Baujahr: 2008, in einwandfreiem Betriebszustand. 5. Kopierfräse (Pantograph); Hersteller: URBAN, Modell: MLA A23 – 100466321S, Seriennummer: 528-0, Baujahr: 2008, in einwandfreiem Betriebszustand. Gedpfxjucl Dcs Anfsit 6. Ständerfräse; Hersteller: URBAN, Modell: M7CRH-100149891, Seriennummer: 559, Baujahr: 2008, in einwandfreiem Betriebszustand. 7. Entgratmaschine mit 2 Fräsaggregaten; Hersteller: URBAN, Modell: SV 280, Seriennummer: 29342, Baujahr: 2008, in einwandfreiem Betriebszustand. 8. Glasleisten-Säge; Hersteller: URBAN, Modell: GLS 102; Seriennummer: 102015; Baujahr: 2010, in einwandfreiem Betriebszustand. Die Produktionskapazität der Linie beträgt 30–50 Einheiten/8 h (abhängig von der Anzahl der Bedienpersonen). Die Linie wurde von 2010 bis 2014 nur sehr wenig und nicht annähernd mit voller Kapazität genutzt. Einzelmaschinenverkauf auf Anfrage möglich. Nettopreis für die komplette Linie: 33.500 Euro zzgl. MwSt., verhandelbar, FCA Oradea.

Stanje: dober (rabljeno), Leto izdelave: 2009, Elumatec SBZ 140 Long version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light barriers Automatic clamp detection Central lubrication Cooling spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F mount, 8-position automatic tool changer. Max. milling diameter: 80 mm Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining centre (axes: X, Y, Z + A). It is designed for aluminium and thin-walled steel profiles. 4-axis CNC machining centre (X/Y/Z + tilting/rotating axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis travel speed: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC control system with PC operation, colour display, USB & network. Software: eluCam. Automatic material clamps, automatic positioning via locating pins Pendulum/shuttle operation (two work zones) improves production throughput. Besides milling and drilling, also tapping, sawing, profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Gsdpfx Aex E Ahzjnfoit Financial information VAT/margin: VAT: The displayed price is exclusive of VAT (VAT deductible for businesses).

Stanje: rabljeno, Leto izdelave: 1999, moč: 3 kW (4,08 KM), vhodna napetost: 400 V, največja višina reza: 200 mm, premer žaginega lista: 520 mm, skupna masa: 350 kg, dolžina rezanja (maks.): 420 mm, montažni premer: 50 mm, pogonska enota žage: 3.000 W, No. 04511 Graule ZS 200 N Crosscut and Mitre Circular Saw Used, year of manufacture 1999 Saw head swivels and tilts 3 kW three-phase brake motor, 400 V Saw blade diameter: 520 mm Saw blade bore: 50 mm Cutting height: 200 mm Cutting height at 45° blade tilt: 140 mm Cutting length: 420 mm Table dimensions: 900 x 700 mm (L x W) Aluminium back fence Includes machine stand and rear handwheel for tilt adjustment Hydraulic feed brake Pneumatic material clamping from above on both sides Saw blade spray system for coolant or lubricant Tungsten carbide-tipped circular saw blade for aluminium and plastics, 520 mm diameter Roller conveyor, type RLK, 4000 mm long, with fold-away material stop and scale Roller conveyor 4000 mm long after the saw Roller conveyor width: 350 mm Transport dimensions (approx.): Machine 1650 x 1200 x 1850 mm (L x W x H), roller conveyors approx. 4500 x 400 x 1950 mm (L x W x H) Weight approx. 350 kg To avoid misunderstandings, on-site inspection by appointment is possible and recommended. Item is sold as-is. Technical specifications, condition description, year of manufacture, and scope of delivery are based on the manufacturer’s brochure or previous owner, with no guarantee. Giedpfoyh Nfusx Anfjt Sale subject to prior sale. For used machinery, any warranty is excluded. The following applies: “purchased as inspected.” Payment terms: Prices are subject to VAT. Payment prior to collection or dispatch. Delivery terms: ex stock

Leto izdelave: 2018, stanje: dober (rabljeno), For machining aluminium and steel profiles Gisdpex Diqwjfx Anfjt Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" display Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Automatic clamp positioning Two separate work zones suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control device Safety light curtain at the front and side safety fence Minimum quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming via control device High-speed spindle up to 18,000 rpm Incl. 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Travel speed X-/Y-/Z-axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Stanje: rabljeno, Leto izdelave: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right sawing unit is fixed; the left unit can be adjusted to the required cutting length, which can be read off a digital display. Both units feature supports enabling simultaneous cutting of two glazing beads. For processing larger cross-sections, the upper support can be removed. Upon completion of the cutting cycle, the pneumatic clamping cylinders automatically swing to the side, simplifying loading and unloading. STANDARD EQUIPMENT: • Fixed right-hand unit • Digital measuring display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety guards with horizontal, pivotable clamping devices • Two-hand operation • Belt drive • Pneumatically raised sawing unit • Central support TECHNICAL SPECIFICATIONS: • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Footprint (standard configuration): 3000 x 850 mm Extended cutting capacity: Gedpsxnlgcofx Anfjit 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions: 1 set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 pc Adaptations for rebated profiles: 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (shown in green), an angled presser is depicted, following the inclined profile and pressing it against the (shown in red) spacer on the stop. Location: Garbsen

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, številka stroja/vozila: XZ 10480, največja hitrost vrtenja: 3.500 obr/min, Stroj v delovnem stanju / 400 FCRO 32 mm / Žagalni stroj za industrijo penaste mase, Tip Panda 400, M80, Moč 1,9 kW, Godpsw Iwaisfx Anfjit Leto izdelave 2014, Žagin list 400 mm, Skupne dimenzije: 1155 x 100 x 140 cm (z valjčnimi mizami), Dimenzije brez valjčnih miz: 71 x 100 x 140 cm.

Stanje: novo, The ALTENDORF F 25 offers everything you need from a sliding table saw in a compact footprint. Whether for your first own workshop, daily operations, industrial production, or as a powerful secondary machine — the F 25 is the space-saving all-rounder that simply makes you more productive. Materials such as wood-based panels, solid wood, wood-like materials, or extruded profiles can be processed effortlessly thanks to outstanding precision, easy handling, and excellent cut quality. The single-sided tilting saw unit also allows for angle cuts. The smooth-running double roller carriage, based on the Altendorf system, is part of the standard equipment, as are the digital height and tilt displays. This machine is equally suited for beginners and professionals alike. Double roller carriage Tiltable Manual height and tilt adjustment Parallel fence with manual fine adjustment Angle/miter fence Prepared for retrofitting of a scoring unit ----- Technical Data ----- Swivel range: 0 - 46° Carriage length: 3,200 mm Cutting width: 1,000 mm Cutting height: 100 mm Max. saw blade diameter: 315 mm Max. projection of saw blade: 104 mm Non-CE version: max. saw blade diameter: 350 mm, max. saw blade projection: 121.5 mm Crosscut fence extendable up to: 3,450 mm Speed: 4,200 rpm Motor output: 4.4 kW, 5.5 HP Gijdpfx Ansu R S Hcsfot Working table height: 880 mm - Large extraction hood optional - - New demonstration machine -

Stanje: rabljeno, Laminator za testo Proizvajalec: Seewer Rondo Model: SSO 62 Giodjw Nw A Tspfx Anfst Dimenzije: 305x115x120 cm Električna moč: 1,1 kW Napetost: 380V 50Hz Dimenzije traku: 62x130 cm

Stanje: novo, Leto izdelave: 2026, Mini žerjav na goseničnem podvozju TB5000 Mini žerjav na goseničnem podvozju, namenjen za delo v zaprtih prostorih in na prostem. Maksimalna nosilnost: 2400 kg. * radijsko upravljanje naprave - vožnja, delo, razpiranje stopal Gisdjibqraspfx Anfot * dvojno žerjavno napajanje - dizelsko in električno 230 V * največja nosilnost - 2400 kg * sistem za zaščito pred preobremenitvijo kot standard * največji vodoravni doseg nad 11 m * štirje hidravlični podaljški + 1 ročni podaljšek * največji navpični doseg nad 13 m * 4 hidravlično spuščene podpore * teža cca 2200 kg * višina cca 195 cm * širina cca 88 cm * aktivna roka 16 stopinj Dodatna, opcijska oprema: *iskalni kavelj * hidravlični vitel 990kg * Napajanje z litij-ionsko baterijo * blazinice za oporne noge *hidravlični FLY JIB Na voljo v barvi po vaši izbiri.

Stanje: rabljeno, Leto izdelave: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) Godsxy Tmnjpfx Anfeit MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded components, ensuring extreme stability. The large-base table design is the secret to guaranteeing long-term precision and stability. The machine’s layout allows the operator optimal workflow with minimal space requirements. The moving gantry carrier is built from a solid monoblock. It is positioned in the X-direction on prismatic ground guides with recirculating ball carriages. The working unit is mounted on this mobile aggregate carrier, also using prismatic ground guides and recirculating ball carriages. AXIS MOVEMENT All axes move on large-section prism linear guides and recirculating ball carriages with a large contact area, ensuring optimal gliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved via slanted-tooth rack-and-pinion drive. Large-cross-section recirculating ball screws guarantee the precise positioning of the working unit along the moving gantry (Y- and Z-axes). Top-quality drives and brushless motors govern perfect mechanical dynamics and maximum positioning accuracy. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are installed around the mobile support, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation, without the access restrictions typical with foot mat systems. This prevents unwanted interruptions of the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard fence 1 Side and rear protective fencing Automatic central lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is regulated by the CNC control at regular intervals, without manual intervention on the machine. Central extraction port 1 All individual extraction ports of the processing units are combined into a central port. Various slide gates within the port are controlled via NC, reducing the required extraction air flow. Chip conveyor 1 Maxi - 5 axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle rated for 11 kW at 20,000 rpm in S1 (100% ED) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface HSK 63F 18 kW inverter, stepless, constant power output Max. rotation: B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, complex horizontal positioning in limited working areas is possible. This enables the machining of complex geometries without the risk of collisions.