Horizontalna + vertikalna vrtljiva miza

WALTER , RtW 400 TG

Stanje: rabljeno, Circular Trough Vibratory Finishing Machine WALTHER TROWAL Type CLS-230 Item No. 05.833/00 Year of Manufacture: 1969 Trough Diameter: 1,100 mm Total Trough Height (external): approx. 650 mm Processing Tank / Gross Volume: max. 230 liters Usable Volume: approx. 115 liters Rotational Speed: 1,100 to 1,800 rpm, infinitely variable Motor Power: 7.5 kW Mains Connection: 400 Volt, 50 Hz - Operating time can be set manually or via timer - Infinitely variable motor speed via variator gearbox - Manually adjustable eccentric imbalance weights - Tank with polyurethane lining (lining partially damaged or worn) - Soundproofed cover - Manual separation flap - Integrated screen separation device after the separation flap - Liquid connection - Material discharge opening: 180 x 150 mm Kjdpfxsfqpxie Abbjwt - Control cabinet for wall mounting - Baffle cover with perforated screen Space requirement with base (L x W x H): 1,800 x 1,750 x 1,700 mm Net weight: approx. 1,800 kg Good condition Function description: Workpieces and media are set in motion by the induced vibration and are tumbled very gently. The continuous relative movement between the workpieces and the media results in the deburring and surface finishing of the workpieces.

Stanje: dober (rabljeno), Razpon rezanja okroglega jekla pri 45°: 250 mm, Obseg rezanja okroglega jekla pri 90°: 280 mm, največja višina reza: 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity at 45º: Kodpfett Nd Rjx Abbjwt 250 mm round 250 mm square Saw speed: 40/80 m/min Saw blade: 3,320 x 27 x 0.9 mm Miter angle: 0 - 60º Equipped with: - Coolant system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine dimensions (LxWxH): 190 x 120 x 135 cm

Stanje: rabljeno, Leto izdelave: 2007, največja širina rezanja: 1.060 mm, največja višina reza: 1.060 mm, Band saw Kasto HBA 10×12, year of manufacture 2007 Cutting capacities: - Round material: 1,060 mm - Square material: 1,060 x 1,060 mm - Flat material: 1,060 x 1,260 mm Clamping range: 300 – 1,260 mm Smallest dimension to be cut approx.: Ø 300 mm Shortest cutting length: 10 mm Minimum remnant length for single cut: 20 mm Minimum remnant length in automatic mode: 100 mm Kjdpfx Abewk D Efjbowt Table load capacity: max. 50 t Table travel: 6,100 mm Total drive power: 20 kW Saw motor: 11 kW Cutting speed, stepless at 50 and 60 Hz: 12 – 90 m/min Automatic single feed length: 2,100 mm Clamping force machine vice: 50,000 N Saw band dimensions: 11,430 x 80 x 1.6 mm Cutting feed: steplessly adjustable Material feed: hydraulic Material clamping: hydraulic Saw band guide: carbide, replaceable Saw band tension: hydraulic Saw band cleaning: easily exchangeable brush, motor-driven This offer is exclusively for commercial customers within the meaning of Section 14 of the German Civil Code. No sale to private individuals.

Stanje: rabljeno, Hydraulic Workshop Press, Broaching Press, Keyway Broaching Press Hydraulic Workshop Press, Custom built MaVo Type 5t-20 Previously used for broaching keyways in through-holes. Press capacity: 5 tons (at 100 bar hydraulic pressure) Frame width: 770 mm Cylinder stroke: 220 mm Distance from piston rod thread to table traverse: max. 900 mm Ram downwards press speed: approx. 11.5 mm/sec (220 mm in 19 sec) Kwjdewki Apspfx Abbjt Ram upwards press speed: approx. 24.5 mm/sec (220 mm in 9 sec) Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Two-hand operation (2 buttons for down, 1 button for up) - HAWE hydraulic pump, Type K5/3 (can deliver up to 400 bar, but the pump becomes very loud at this pressure) - Piston rod thread connection: M42 x 1.5 mm external thread - 1 piece screw-in extension approx. 290 mm for piston rod with M42 x 1.5 mm internal thread - 1 piece screw-in extension approx. 250 mm for piston rod with M42 x 1.5 mm internal thread - 2 pieces ram extensions for inserting into screw-in extension, lengths: 110 and 130 mm - 2 support plates - Very robust steel construction made of 140 mm double I-beam - Estimated load-bearing capacity of the steel frame: likely 40 tons or more - Movable with pallet truck Required space (L x W x H): 1200 x 930 x 2280 mm Weight: 485 kg

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories Kjdpfenzpx Rjx Abbowt -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 -Drive power: 1.1 kW -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Stanje: dober (rabljeno), Leto izdelave: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture: 2002 Maximum punching and shearing force: 1000 kN Punches 31 mm holes in 25 mm steel Cuts up to 500 mm at the flat bar shear for material thickness up to 18 mm steel Contact length stop Extensive accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg Kodpfx Abet Iklkobswt

Stanje: rabljeno, Leto izdelave: 1987, Technical specifications: Swing diameter over bed: 500 mm Swing diameter over cross slide: 280 mm Turning length: 1500 mm Distance between centers: 1500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Spindle speed range: 25–1250 / 32–1600 / 36–1800 rpm, 18 steps Feed rate: 0.05 – 8.5 mm/rev Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill stroke: 200 mm Total connected load: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions (L x W x H): approx. 3.2 x 1.3 x 1.5 m Ksdpfxju Ixznj Abbjwt Thread cutting possible Cross slide travel 300 mm, feed 0.015 – 2.8 mm (end position clutch not functional, manual shut-off required) Top slide with 4-way toolpost Steel faceplate Ø 705 mm with offset threaded holes

Stanje: dober (rabljeno), vhodna napetost: 400 V, skupna višina: 2.000 mm, skupna masa: 1.500 kg, širina transportnega traku: 300 mm, lastna masa: 1.500 kg, vhodna frekvenca: 50 Hz, GBT tehtalni delilec testa Kodpfoid Emyox Abbswt Model Olympia Standard Industrijski stroj za delitev testa - Zmogljivost cca 500 do 2500 kosov/uro - Lijak cca 200 kg testa - Izvedba iz nerjavečega jekla - Mobilni 3-komorni delilnik - Z izhodnim trakom - Priključek 400V, 16A-CEE vtič Rabljeni stroj Obiščite naš veliki center pekarskih strojev!

Stanje: pripravljen za uporabo (rabljen), skupna širina: 3.000 mm, skupna višina: 5.350 mm, skupna dolžina: 15.000 mm, lastna masa: 20.000 kg, Valjčni transporter tipa G s peskalnimi kolesi Titan Za profile, pločevine, valje, cevi... maksimalna vhodna širina: 1100 mm maksimalna vhodna višina: 550 mm 4 turbine, vsaka po 11 kW delovna hitrost: 1,4–2,4 m/min Skupna moč: 62 kW Kwsdpfxswikats Abbot Namešča se na tla, temeljenje ni potrebno! Vključuje veliko izbiro novih rezervnih delov v vrednosti več kot 80.000 €!

Stanje: rabljeno, Leto izdelave: 2003, Travel X: 930 mm Travel Y: 400 mm Travel Z: 406 mm Spindle speed: 9–6,750 rpm Table size: 1,370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (X) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product Information: “Multifunction Milling Machine Optimill MF 4 Vario—Tool Milling Machine with Variable Speed” Optimill MF 4 Vario—multifunctional drilling-milling machines designed for professional applications. Electronically stepless drive control with frequency inverter “made in Germany” and digital 3-axis position display DPA 21. Heavy, robust design made of high-quality Meehanite cast iron. High concentricity accuracy with tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X- and Y-axes feature adjustable dovetail guideways. Coolant system. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse on Z-axis. Kjdpfxjt U Rm Io Abbewt Equipment details: - Frequency inverter quality made in the EU - Drilling-milling head, tiltable ±45°, overhang 200–680 mm, spindle speeds - Stepless speed control with extra-wide speed range - Adjustable drilling depth stop with millimeter scale, easily readable on front - Safety screen, height-adjustable and generously dimensioned - Cross table: massive, large, precisely surface-machined - Motorized table height adjustment on Z-axis - Adjustable limit stops - OPTI control panel: integrated control console - Integrated digital position display DPA 21 with speed display - X-axis : motorized table feed, stepless speed control, rapid feed, forward/reverse Technical Data: Product length: 1,500 mm Product width/depth: 1,450 mm Product height: 2,200 mm Net weight: 1,150 kg Total power connection: 4 kW Electrical voltage: 400 V Phases: 3~ Network frequency: 50 Hz Max. face mill diameter: 100 mm Max. shank cutter diameter: 20 mm Vertical spindle reach: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range: 8 steps Vertical spindle speed control: electronically adjustable Horizontal table length: 1,370 mm Horizontal table width: 254 mm Vertical spindle to table min.: 40 mm Vertical spindle to table max.: 446 mm Horizontal table T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle motor power (normal mode): 3 kW Coolant pump motor power: 100 W Manual X-axis travel: 930 mm Manual Y-axis travel: 400 mm Manual Z-axis travel: 406 mm Automatic X-axis travel: 850 mm Automatic Z-axis travel: 350 mm Drilling capacity steel (S235JR): 32 mm Continuous drilling capacity steel (S235JR): 28 mm Vertical spindle drilling head swivel range Z-X plane: ±45° Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev