Sistem lakiranja

Wagner

2010 Powder Coating Line, excellent condition. Currently in operation, available for inspection and testing.

Maximum part dimensions: L x W x H = 2600 x 400 x 1850 mm

Equipment

Process Conveyor

Automatic speed V = 1.2 m/min
Speed adjustable from 0.5 to 2.5 m/min
Pre-treatment station MNA-3-LPG, total length 16.7 m

Entry zone: L = 2.5 m
a. Washing, degreasing, and phosphating: L = 3.6 m

Number of spray frames – 10
Number of nozzles per frame – 18
Total number of nozzles – 180
Pump capacity – 162 m³/h
Pump power – 15 kW
Active liquid tank – 4 m³
Internal heat exchanger with LPG burner – 160 kW
Temperature – 50°C
Mechanical oil separator
Filtration system
Dosing system with membrane pump and regulator
Washing duration – 3 min
b. Drip-off zone L = 3.1 m

Drip-off duration – 2 min 30 sec
c. First rinse L = 1.2 m

Number of spray frames – 4
Number of nozzles per frame – 18
Total number of nozzles – 64
Pump capacity – 38 m³/h
Pump power – 3 kW
Water tank – 1.5 m³
Rinsing duration – 1 min
d. Drip-off zone L = 3.1 m
Ihedpfsv Ed Uksx Adkjw

Drip-off duration – 2 min 30 sec
e. Fine rinse L = 1.28 m

Number of spray frames – 3
Number of nozzles per frame – 18
Total number of nozzles – 54
Pump capacity – 33 m³/h
Water tank – 1.5 m³
Pump power – 3 kW
Additional spray frame
Rinsing duration – 1 min
f. Drip-off zone L = 2 m

Drip-off duration – 1 min 40 sec
Three connections for extraction system with three fans
Operational zone made from stainless steel
Piping made from PVC or stainless steel

1 unit

Automatic post-washing dryer AST-1-KLPG:

Working area dimensions L x W x H = 7000 x 3000 x 2800 mm
Air curtains on both sides to reduce heat loss
Indirect heat exchanger heated by LPG, 200 kW
Three fans, air supply 6000 m³/h
Two extraction system connections
Temperature sensor and controller
Overheat sensor
Circulation sensor
Working area made of galvanized steel
Thermal insulation – 200 mm thick
Drying time – 10 min
1 unit

Automatic polymerization oven APT-2-KLPG

Working area dimensions L x W x H = 10200 x 3600 x 2800 mm
Air curtain on one side to reduce heat loss
Two indirect heat exchangers, heated by LPG, each 300 kW
Eight circulation fans, each with a capacity 6000 m³/h
Two extraction system connections
Temperature sensor and controller
Overheat sensor
Circulation sensor
Working area made of galvanized steel
Thermal insulation – 200 mm thick
Polymerization time – 25 min
1 unit

Overhead rail transport system ATR for the paint shop:

Straight rail with hangers L = 400 mm – 146 m
Drive stations – 2 units
Tension station – 1 unit
Chain lubrication station – 1 unit
Support frame drawings for rails – 1 set

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.