Gosenični bager

Volvo EC350 Long Reach Boom-Arm Manufacturing

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Izdelujemo oklepe za bagre in nakladalce. Za podrobne informacije nas kontaktirajte. Lrodpfoxtu Hiex Ah Uol

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable Loading Platform: - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: Lrodpfx Ahoh Etf Ro Ujl - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall - Mount at the rear section of the gooseneck for ALU approach ramps - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Stanje: rabljeno, prevoženi kilometri: 75.000 km, moč: 70 kW (95,17 KM), prva registracija: 04/2012, vrsta goriva: dizel, skupna masa: 3.498 kg, barva: rumena, vrsta prenosa: samodejen, emisijski razred: Euro 5, število sedežev: 2, prostornina tovornega prostora: 17 m³, dolžina tovornega prostora: 4.400 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 2.000 mm, Leto izdelave: 2012, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, Net price: €9,950 Mercedes Benz Sprinter MAXI – Box Body (SAXAS) Euro 5 Please no emails. Due to time constraints, emails can only be processed sporadically. Thank you for your understanding! Opening hours and further information: Viewing/Purchase without appointment possible: No appointment necessary!!!! Mon – Thu: 9:00 to 16:00 Fri: 9:00 to 13:00 Sat: 9:00 to 12:00 Address: Tabakried 11 84076 Pfeffenhausen For questions, please contact Christian Hirsch or our friendly staff. TÜV: New inspection upon request with purchase - Full service history - One owner - LED interior lighting - Interior motion sensor - Sliding door between cab and box body - Reversing camera (see photos) - Multiple ventilation ducts - Folding shelves - Electrically locked doors - Rear access step Cargo area dimensions: Length: 4.40 m Height: 2.00 m Width: 2.00 m Special features: - Hill start assist - 220 A generator - Steering wheel (mechanically adjustable column) - Radio pre-installation - Front mud flaps - Rear stabilizer bar - Reinforced front stabilizer - AGM battery 95 Ah Further equipment: - Adaptive brake lights - Driver’s airbag - Washer fluid level indicator - Electrically adjustable and heated outside mirrors (both) with integrated indicators - 74 Ah battery - Brake assist - ABS + ASR braking system - Cab roof lining - Lockable glove compartment - Body structure: box body - Fuel tank: main tank 75 l - Headlight range adjustment - Truck registration - Engine: 2.1 L – 70 kW CDI - Wheelbase: 4,325 mm - Smoker package - Tire repair kit with compressor - Euro 5 emissions standard Lodswcv Dwopfx Ah Usrl - Seat upholstery: Lima fabric - ASSYST maintenance interval display - Thermal insulation glazing - Permissible gross vehicle weight: 3.5 t If you have questions, please contact Christian Hirsch (please try several times as we are often in customer consultations), or our friendly staff. Further offers at / Equipment details are determined via VIN query, technical errors possible. Information provided online is non-binding and does not constitute guaranteed features. The seller is not liable for typographical and data transmission errors, modifications, or input errors. Subject to errors and prior sale.

Stanje: rabljeno, številka stroja/vozila: 008027, Maks. obdelovalna širina: 1350 mm Min. obdelovalna debelina: 200 mm Ljdpfx Ahewvq E Ae Usrl Delovna miza: fiksna višina Podtlakovni trak: da Število delovnih agregatov: 4 kos

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually Ljdpergzv Nsfx Ah Uerl * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Leto izdelave: 2023, stanje: novo, Device: Excavator arm Lrsdpfjn Tmy Rox Ah Ujl

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.922 h, Doppstadt Inventhor Type 9 Engine type: Diesel engine Manufacturer: MTU 6R 1300 Emission standard: Stage V / EUROMOT III A Rated power: 390 kW / 530 HP Fuel tank capacity: 1,000 l Discharge Conveyor Width: 1,200 mm Length: 8,500 mm Belt speed: 2.0 m/s Discharge height: 5,050 mm Feed Hopper Loading height: 3,307 mm Drum Number of drums: 1 Drum length: 3,000 mm Drum diameter: 600 mm Drum speed: -5 to 32 rpm Number of drum tools: approx. 42 MACHINE DETAILS Total weight: 33,000 kg Length: 16,786 mm Width: 2,500 mm Height: 5,050 mm Transport width: 2,500 mm Transport height: 3,893 mm Transport length: 9,973 mm Operating hours: 4,724 h FEATURES - Additional equipment: Overband magnet - New stepless drive concept with VarioDirect Drive - No engine load from starting torque due to load-free drum positioning - Self-cleaning function for the wrapper - Flexible shredding concept with different package options - New door and housing design for improved maintenance access - Quick conveyor unfolding mechanism at the touch of a button - State-of-the-art monitoring system Lodoxcx Snspfx Ah Uerl - Reduced noise emissions Machine is refurbished and immediately available!!!!

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 6.850 h, moč: 129 kW (175,39 KM), velikost sprednje pnevmatike: 600/70R28, velikost zadnje pnevmatike: 710/70R42, Oprema: zavorni sistem na stisnjen zrak, OPERATING HOURS: 6,800 / AUTOPOWR / IVT - 50 KM/H / COMMANDCENTER DISPLAY AUTO-TRAC READY / JDLink COMPATIBLE / 4600 PROCESSOR / CAB PR.-CV CAB WITH COMMAND ARM STANDARD SEAT / MIRRORS – MANUALLY TELESCOPIC PANORAMA WINDSCREEN WITH POWER DOOR / STANDARD RADIO / HYD Ljdpfx Ahju Rvklj Usrl

Stanje: rabljeno, obratovalne ure: 22.327 h, Fiat-Hitachi Fh 220 | Used Crawler Excavator | 22,327 operating hours 📍 Location: Germany, Meppen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy now for EUR 15,000 or make an offer. Payment upon delivery available for a low fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points: 37 approved ✅ 19 imperfect ℹ️ 7 issues ⚠️ 📌 Inspector's Comment: Heavily used machine. No air conditioning. Wipers defective. Hydraulic oil breather defective. Hour meter defective; no reliable information available. Track plates can be cut to reduce transport width for an additional charge. Year of manufacture is unknown and cannot be verified. Operator’s manual indicates either 1980 or 1990, but this cannot be confirmed. The hour meter comes from another unit; displayed hours are incorrect. Actual operating hours are estimated to be between 20,000 and 30,000. The cabin was replaced and is not original. Lrjdpfx Aex N Havjh Uel 📄 Want to see the full inspection, additional photos, or video? Tip: Use reference “39638 Equippo” for further online details. 💡 Why this machine and our service stand out: ✔ Comprehensive professional inspection ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment options? We provide useful tools and resources for equipment owners and operators—easily accessible on our platform.

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 590 h, Funkcionalnost: nepreverjeno, Oprema: Lodpevnq Rksfx Ah Ujrl Osnovni paket Methor veriga Gosenice podvozje z dvema hitrostma vožnje Podvozna veriga 400 mm 3-letveni Dodatni hidravlični priključek 70 l/min 24-V električni nadzor Velika popolna radijska daljinska upravljalnik Vzdrževalno prijazen motornim prostor z LED osvetlitvijo Zložljiv lijak s senzorjem položaja in avtomatskim nadzorom Hidravlično reverzibilno ventilatorsko kolo Akustično opozorilo ob zagonu Rezervoar za gorivo 300 litrov Barva: RAL 2011 temno oranžna Dodatna oprema: Gumijaste blazinice za hitro menjavo Motor Cat C7.1, 205 kW Zadnji trak 6,9 m Okvir za nadtrakovni magnet Nadtrakovni magnet Sistem za hitro menjavo valjev na valju Sistem za hitro menjavo valjev na stroju Namakanje LED delovna osvetlitev Dodatna električna črpalka za obratovanje ob mirovanju motorja Gasilni aparat GN 9 A-3 DIN EN 3