Stroj za ostrenje žaginih listov

VOLLMER NS 700

Stanje: dober (rabljeno), Machine for setting HM saw blades VOLLMER model NS700 Kedjgqalcepfx Abrsdw

Stanje: novo, WMD45A ROGI Drilling and Milling Machine VERY COMPLETE MACHINE Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Worktable dimensions ----- 800 x 240 mm T-slot dimensions ----- 14 mm Spindle taper ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tiltable ----- Left / Right 90 Degrees Longitudinal travel ----- 560 mm Transversal travel ----- 230 mm Speed range ----- 75 - 3200 rpm Weight ----- 580 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDES * 3-axis digital readout by SINO * Automatic longitudinal table feed * Drill chuck with ISO30 - B16 shank * Left / Right switch Kdodoga Tyzopfx Abrow * Spindle guard * Fine adjustment * 2-speed motor * Drift key * LED work lamp * Coolant system * Tapping function * Digital depth stop * Milling head motorized height adjustment * Various tools in case

Stanje: rabljeno, Leto izdelave: 1979, številka stroja/vozila: 5255, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 540 x 450 mm Ksdpfxjcxxu Ns Abrsdw BRUDERER precision double-roll feeder: left side Adjustable stroke (min–max): 16–40 mm Distance between columns: 330 x 300 mm Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed stamping press in three-column design, equipped with air cooler, piece counter, separate control cabinet, air clutch, and BRUDERER precision double-roll feeder, left side.

Stanje: rabljeno, Leto izdelave: 1995, Wheel diameter – max. 80 mm Wheel width 120 mm Module – max. 3 Ksdst Hw R Dspfx Abrjdw Module – min. 1 Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. ___ m LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Year of manufacture 1995 # 0836 _____ Max. wheel diameter: 80 mm Module: 1 – 3 Helix angle: +/- 45° Distance from table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shifting/Tool traverse path: 180 mm Min. number of teeth: 3! Cutter diameter x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feed rates (axial/radial/tangential): 20/4/5 mm/rev Maximum workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW – 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special features • SIEMENS CNC control system Type 840 C for 6 axes (i.e., cutter drive / table drive / swiveling angle of milling head / axial feed / radial feed / tangential feed), with gear-cutting-specific operator interface and diagnostic functions for fast troubleshooting. • Equipped for automatic threading of the hobbing cutter into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading system SSL = rapid-swing loader with mechanical step gearing and cam disk for fast loading cycles. Features triple rotary gripper for blank picking / machining position / unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) • Workpiece feed is via a plate-chain conveyor (PKB) for transporting workpieces with frictional engagement using workpiece carriers. Additional conveyor belt for blanks and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete enclosure of the working area with sliding door and oil mist extraction, etc. Machine can also be used for dry gear cutting. Condition: satisfactory to good – under power and ready for demonstration, compact construction! Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: novo, Leto izdelave: 2025, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC Kjdpfx Aonfvx Nobrsdw • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: zelo dobro (rabljeno), Kompletna linija za piljenje s ulaznom trakom, ARI SKR 600 reduktorom, ARI KS 122 pilom, ARI BKR 600 drugim reduktorom, ARI DS 70 višelisnom pilom i ARI KT 52 linijom za obrezivanje s potpunim skenerom. Puni donji pod za rukovanje otpadom. Svi električni ormari i hidraulika uključeni. Kodpfx Aeikvl Rebrodw

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 4.500 h, skupna masa: 5.050 kg, vrsta goriva: dizel, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, nazivna (navidezna) moč: 500 kVA, neprekinjena (navidezna) moč: 1 kVA, največja hitrost vrtenja: 1.500 obr/min, gorivo: dizel, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Power generator: Diesel, FOGO FDG 500VS, engine: Volvo Penta TAD1641 GE, year of manufacture 2015, operational. Approx. 4,500 operating hours. Kodpfxsvb I H Ao Abrodw

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 with 3-axis TNC113 active control, which is particularly notable for its ease of operation. This newer model from 1989 features, among other things, central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. As part of the partial overhaul, the following work was carried out, among others: - Spindle bearings in the milling head replaced - Repainted - Various standard parts such as handles, oil sight glasses, switches, etc. replaced - Worn parts such as drive belts replaced - Way covers partially replaced - Gib strips adjusted - And much more... Delivery time: immediate Year of manufacture: 1989 Machine No.: 2102-xxxx Table: rigid angle table Travel: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1,200 mm/min Features & accessories: coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and worn parts, if necessary, are replaced in advance Kdodpfx Abopy Eldsrow - Upon request, we can completely or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange shipping and/or installation

Stanje: dober (rabljeno), Leto izdelave: 1977, Discharge unit for HM saw VOLLMER model NS120 Ksdpfx Absf Rlgnorsdw

Stanje: rabljeno, Tool clamping surface: 0 mm Kdsdpfsd Ihcaex Abrjw Weight: 0 t Titanium-coated solid carbide slot drills available in the following diameters and various quantities: Ø 9.7 - 11.7 - 13.7 - 15.7 - 17.7 - 19.7 - 20.5 - 21 mm Cutters up to and including 15 mm: €15 each. From 15 mm upwards: €20 each!