Hidravlična stiskalnica

VOCO Vogel & Co 40×250 40 ton

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. Pgsdofxyhfjpfx Agpsw - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: dober (rabljeno), stiskalna sila: 100 t, Naprodaj: Ursviken VP100 – Hidravlična preša za preoblikovanje Naprodaj kakovostna hidravlična preša Ursviken VP100. Izdelano na Švedskem, stroji Ursviken slovijo po svoji robustnosti, natančnosti in vzdržljivosti. Primerno za širok spekter upogibanja in preoblikovalnih postopkov v industriji. 🔧 Tehnične specifikacije (primer vrednosti, dopolnite po potrebi): Preša sila: 100 ton Delovna dolžina: [npr. 3000 mm] Hod bata: [npr. 200 mm] Leto izdelave: [leto] Pogon: hidravlični Krmiljenje: ročno / CNC (določite) Teža stroja: [pribl. 6000 kg] Pgedpexv Ek Defx Agpew 💡 Ključne prednosti: Robustna in vzdržljiva konstrukcija Natančno in ponovljivo preoblikovanje Enostavno upravljanje in vzdrževanje Primerno za malo- in srednjeserijsko proizvodnjo Stroj je v delujočem stanju in pripravljen za uporabo. Za več informacij ali ponudbo nas kontaktirajte!

Stanje: rabljeno, Leto izdelave: 1985, Nazivna stiskalna sila: 40 t Hod bata: 500 mm Odprtina: 710 mm Velikost mize: 630 mm Iztegnitev bata od stojala: 320 mm Pjdpfx Agoxm R Ivjpogw Hitrost bata: - prosto 125 mm/s, - stiskanje 16 mm/s, povratna 315 mm/s Stroj je priključen na elektriko, delujoč.

Stanje: dober (rabljeno), Leto izdelave: 1982, Pressing force: max. 200 kN Safety distance: 100 mm Secondary stroke: max. 10 mm Motor power: 3 kW Psdexr Ay Uepfx Agpogw incl. accessories