Stroj za neprekinjeno vrtanje

Vitap

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, skupna masa: 600 kg, This VITAP Eclipse edge banding machine was manufactured in 2018. It is ideal for precise edge processing and ensures consistent performance on woodworking projects. Take advantage of the opportunity to purchase this VITAP Eclipse edge bander. Contact us for further information. Additional Equipment • Glue Pot Capacity: Maximum glue pot capacity 1 kg (with optional 2 kg glue pot) • Gluing Unit: Edge banding on open and closed curved panels with small and large dimensions / 1 glue roller / 2 rollers for copying panel shapes / 2 800-watt heating elements with electronic temperature control / Manual glue quantity adjustment / Glue temperature setting / Automatic edge trimming system • PLC System: For setting the dimensions and trimming the edge, with encoder reading • Laser: Assists with cut programming for closed parts, eliminating the need to measure parts • Workpiece Feed: Automatic part feed on/off Itsdpfjyap Trox Af Tjb • Working Area: For banding and trimming small parts • Edging Magazine: Roller edge magazine with deflection roller system • Milling Unit: 2 high-frequency motors 0.5 kW with a speed of 15,000 rpm / On/Off milling unit / Pneumatic lifting of both motors / 2 brazed cutters R=3 Z=6 • Articulated Arm: Complete with workpiece lowering table for squaring and trimming large parts Machine Advantages Qualitative Advantages • Facilitates efficient squaring and trimming of both small and large parts • Complies with CE standards Technical Advantages • Machine dimensions (LxWxH): 2000 x 2000 x 1700 mm (with arms closed); 3400 x 3400 x 1700 mm (with arms open)

Stanje: rabljeno, Dematic Conveyor System Roller Conveyors – Customizable Planning RA1287 We plan your customized conveyor system using pre-owned equipment! The Dematic roller conveyors are in good pre-owned condition. The roller conveyors are available in various configurations, such as: - Gravity conveyors – roller tracks without drive - Roller conveyors – driven straight and curved roller tracks - Accumulation conveyors with or without RSPN (pneumatic zone brakes) Available conveyor lengths (CL): 3000 mm, 2000 mm, 1500 mm, 1000 mm Available nominal/external widths (NW): 600 mm, 500 mm, 400 mm Optional accessories include: - Motors with and without frequency converters from SEW Eurodrive / Movimot - Supports - Side guides Further information: Manufacturer: Dematic Type: Roller conveyor Year of manufacture: Unknown Condition: Good (used) Roller width (RW): 540 mm, 440 mm, 340 mm Roller pitch: 62.5–125 mm, variable (smallest pitch in curves is 56 mm) Drive types: Head drive and center drive Conveyable load: Up to 30 kg Itjdjk Aa R Ispfx Af Tjb Price: On request, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional consultation, feel free to contact us. Simply reach out to us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2016, Vitap Eclipse Kantenanleimmaschine für runde, gebogene Werkstücke Halbautomatische Kantenanleimmaschine für große, runde oder gebogene Werkstücke mit einer Plattenstärke von 10 bis 60 mm und einer Bandstärke von 1 bis 3 mm. Die Höhe von 60 mm ist nur bei einer Kantenbandstärke von 1 mm möglich. Bei stärkerem Kantenband hängt es von der Qualität des Bandes ab und muss in Verbindung mit dem Schneidaggregat vorab getestet werden. Beschreibung: - Zwei Kopierrollen zur Abtastung der Werkstückkontur - Leimstation - Leimbecken mit 1 kg Fassungsvermögen - Zwei 800W-Heizelemente mit elektronischer Temperaturanzeige über die SPS - Leimauftragung durch Leimwalze - Leimbecken aus Aluminium zur optimalen Wärmeverteilung - Leimzufuhr per Knopfdruck regulierbar - Automatische Schereinheit für Kantenmaterial von der Rolle mit Breiten zwischen 3 und 45 mm - Aggregat wird über Sensor für geschlossene Kantenanleimung oder über Encoder bei einseitiger Bekantung gesteuert - Lasersystem für Längenermittlung, keine Vormessung notwendig - Zu-/Abschaltmöglichkeit für Durchlaufbetrieb - Höhenverstellbarer Tisch für schmale Paneele - Zu-/Abschaltmöglichkeit für das Fräsaggregat - Zwei Kopierrollen zur Abtastung der Werkstückgeometrie - Fräsaggregat ausgestattet mit 2 x 0,5 kW (15.000 U/min Hochfrequenz) und oberen, unteren sowie vorderen Kopierrollen - Fräsaggregat mit Messern R=2, Phase 15°, D=69, Z=6 - Großzügiger Plattenteller mit Vakuum zur Fixierung des Werkstücks (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden Iodewgb Hxjpfx Af Tjtb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, največja hitrost vretena: 3.600 obr/min, moč vretenovega motorja: 5.000 W, število osi: 3, This 3-axis VITAP K3 CNC woodworking center was manufactured in 2023. Take the opportunity to purchase this VITAP K3 CNC woodworking center. Contact us for further information. Additional Equipment • 20" LCD-TFT screen • Industrial PC • WSC user interface with parts list, parametric tools, and parametric setup • TPA EDI32 graphical CAD programming, basic version • USB port • Storage of all files • Macro programming • Import of DXF files • CE compliant Machine Advantages Qualitative Advantages • Exhibition machine, never used Technical Advantages • Feed speed: 25 m/min • Automatic 4-position tool changer • Max. horizontal tool diameter: 12 mm • Max. vertical tool diameter: 35 mm • Motor: 1.7 kW • Number of independent vertical spindles: 12 • Number of independent horizontal spindles on X-axis: (2+2) • Max. horizontal drilling depth in X and Y axis: 35 mm • Max. vertical drilling depth: 43 mm • Number of horizontal drilling spindles on the Y-axis: (2+2) • Electrospindle: 5 kW with ISO30 taper (12,000-24,000 rpm) • Max. workpiece dimensions: Y 1250 mm, Z 50 mm • Min. workpiece dimensions: X 270 mm, Y 150 mm, Z 3 mm Iodpfx Aox U Ub Sef Totb Additional Information Axes: 3 controlled axes (X, Y, Z) X-axis: DDT feed system Y-axis: Travel path of the drilling head Z-axis: Drilling operations Optional Upgrades (at extra cost): Tool kit for production start-up ISO 30/ER 32 toolholder Lubricant cartridges PC with more powerful processor Additional pneumatic hold-down Free nesting system Barcode scanner Postprocessor for MPR files Office software license TPA Front and rear roller supports Narrow workpiece guides Optional clamp opening for 60 mm thickness Angle head options CAD design software for furniture manufacturing

Stanje: novo, Leto izdelave: 2021,

Stanje: zelo dobro (rabljeno), stroj za lepljenje robov, zelo dobro vzdrževan, deluje zelo dobro, lepilo je v granulatu, letnik izdelave 2014. Idealen za majhne prostore, ima naslednje funkcije: predrezkanje, odrezovanje koncev, zgornje in spodnje rezkanje z radijem, radijsko rezkanje, ravno rezkanje. Itedpoyah S Tefx Af Teb

Stanje: zelo dobro (rabljeno), 6 vertical drilling units with two heads each side heads, right and left spindle pitch 32 mm maximum workpiece length 2250 mm magazine feed the lower head spacing is adjusted manually Iodpfxow Ad Tms Af Tjtb heads rotatable by 90 degrees pneumatic upper clamps drilling depth adjustment

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Chipboard panel, used Dimensions: approx. 2,680 x 1,045 mm (W x D) Chipboard thickness: 38 mm Itedpfx Aeitab Sjf Teb Note: The chipboard panels are used and may show minor damage! The panels were previously installed in an SSI Schäfer PR 600 rack system, frame depth 1,050 mm.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Number of independent vertical spindles: 8 Number of horizontal spindles on X axis: (2+2) Number of horizontal spindles on Y axis: (1+1) Itsdpfxsuxmvzo Af Tjb No. 1 blade for slot machining on the rear of the cabinet (ø 100 mm) Max. panel thickness: 50 mm Control: Full Parametric Max. panel weight: 25 kg Max. panel dimensions (see layout): X, Y 920, Z 50 mm Min. panel dimensions: X 270, Y 150 (70 opt.), Z 12 mm Number of controlled axes: 3 Panel feed speed: 25 m/min Spindle rotation speed: 3600 rpm Operating pressure: 7 bar Suction port diameter: ø 120 mm Extraction capacity: (2000 m³/h) – (30 m/s) Max drilling depth for all horizontal bores in X and Y: 30 mm Max drilling depth in vertical: 45 mm Max. horizontal drill bit diameter: 12 mm Max. vertical drill bit diameter: 35 mm Motor: 1.5 kW Dimensions: 2200x1350x1550 mm Weight: 715 kg CE norms

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2025, Ta robna lepilka VITAP GIOTTO, proizvedena leta 2025, je zasnovana za lepljenje robov na ravnih, oblikovanih, konkavnih in konveksnih ploščah. Opremljena je s polavtomatsko konturno robno lepilko s teflonsko prevlečenim lepilnim loncem, nastavljivim nanosom lepila in avtomatsko napravo za rezanje traku. Idealna za obdelavo večjih obdelovancev zaradi ojačanega vrtljivega nosilca in vgrajenega vakuuma. Razmislite o nakupu te robne lepilke VITAP GIOTTO. Kontaktirajte nas za več informacij o tem stroju. Vrste uporabe Lepljenje robov Itedjx E Ecbepfx Af Tob

Stanje: novo, Working length: 3000 mm Working width: 600 mm Roller width: 600 mm Isdpfx Afotv Rf Ue Totb Roller diameter: 90 mm Number of rollers: 12 pcs. Working height: 660 - 815 mm Colour: blue / red Weight: 200 kg - straight design - robust construction - high load-bearing stability - height-adjustable support feet

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 70 mm, največja hitrost vretena: 2.800 obr/min, teža obdelovanca (maks.): 380 kg, dolžina vrtalne vretena: 834 mm, pritisk: 7 letvica, Večvretena vrtalni stroj Vitap Alfa 27T Število vreten: 27 Razmak med vreteni: 32 mm Razdalja med skrajnimi vreteni: 832 mm Globina vrtanja do 70 mm Revolverska nastavitev globine vrtanja Možnost vrtanja navpično-vodoravno-45° Ijdpfoxzzcasx Af Tstb Dva pnevmatska pritiska materiala Regulacija hitrosti vrtanja Moč motorja: 1,85 kW CE certifikat Tehnična dokumentacija Letnik izdelave: 2004

Leto izdelave: 1999, Stanje: zelo dobro (rabljeno), 21 drilling spindles 32 mm spindle pitch Isdsh Txmtepfx Af Tstb Pneumatic clamps Capable of vertical, horizontal, and 45° angle drilling Adjustable drilling depth from 0 to 80 mm

Stanje: dober (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 020313L, višina obdelovanca (maks.): 60 mm, največja debelina roba: 3 mm, pritisk: 7 letvica, Description: Solid steel construction for high machine stability. Workpieces are conveyed on a smooth-running transport chain with plastic plates. The top pressure unit is equipped with two rows of rubber-coated rollers. Manual adjustment of the top pressure, with automatic positioning of the processing units according to the changed workpiece thickness. Mechanical digital display for panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3mm edging material. Support plate for edging rolls with a diameter of up to 800 mm. Central extraction system. Roller track as workpiece support along the entire machine length. Protective hood over all processing units. Control panel, including emergency stop button and lockable main switch. Transformer for 24V auxiliary circuit. Pre-milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable stopper at the infeed. Maximum material removal: 2 mm. 2 motors, each 1.1 kW, 12,000 rpm, maximum material removal 2 mm, extraction diameter 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with rapid heating and glue application roller. System for temperature control and recycling of excess hot-melt adhesive. Power consumption: 3.5 kW, capacity: 1.5 kg, heat-up time: approx. 15 min, depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming the front and rear overhanging edges at a 90° angle, flush with the workpiece. Trimming of the front and rear overhangs is individually controllable as required. Motor: 0.35 kW Saw blade speed: 12,000 rpm. Flush trimming unit With 2 motors for milling radii or chamfers at the top, bottom, and/or front edge. Vertical and horizontal adjustment of the motors on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motors not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, each 0.55 kW, 12,000 rpm. Diamond cutting tools, 68 mm Z6, R=2. Profile scraping unit Flat scraping blade Buffing unit Form trimming unit With 0.22 kW, 12,000 rpm, prismatic linear guide. Max. panel thickness: 50 mm Max. edge material thickness: 2 mm Technical data: Itjdpfx Ajxn Hzbef Tob Edging strip thickness (for manual feed) max.: 5x45 mm Pre-milled panel thickness: 10 – 40 mm Unmilled panel thickness: 10 – 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°–210°C Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction socket diameter: 2x 60 mm CE standard