Vertikalni obdelovalni center

Victor Taichung Vcenter-AX800ll

Stanje: rabljeno, Leto izdelave: 2011, Technical Data: X-travel: 410 mm y-travel: 610 mm z-travel: 500 mm Spindle speed: 15,000 rpm Spindle taper: SK 40 Control: iTNC 530 HEIDENHAIN smart NC Table dimensions: 320 x 320 mm Table load capacity: 100 kg Tool changer: 48 positions Total power requirement: 35 kVA Machine weight approx.: 7.4 t Required space approx.: 4.15 x 3.8 x 3.28 m 5-axis simultaneous machining center, NC rotary swivel table, C-axis 360°, B-axis +30-120°, Chip conveyor, Fgedpfx Abjwlhvwetsc Internal coolant supply 20 bar, 3D probing system, KinematicsOpt, electronic handwheel, Operating hours: approx. 9,600 h "machine on", approx. 3,500 spindle hours

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 640, skupna višina: 2.700 mm, skupna masa: 9.600 kg, največja hitrost vretena: 20.000 obr/min, največja dolžina izdelka: 3.000 mm, število osi: 5, This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, spindle speed of 20,000 rpm, and a 120-position tool changer. The machine is equipped with a chip conveyor, coolant system, and internal coolant supply at 40 bar. It is ideally suited for high-precision machining tasks. Take the opportunity to purchase this DMG MORI DMU 60 EVO vertical machining center. Contact us for further information about this machine. • CNC tilting rotary table • Tool changer: yes, chain-type magazine with 120 positions (120-fold) • Coolant: internal/external; internal coolant supply at 40 bar / 6001; extended chip flush; rinsing pistol; spindle center air blast • Rotating safety window Fedjy D Hvaepfx Abtsgc • Electronic handwheel • Screen display: German/English • Required floor space: 25 sqm • Condition: Very good, in operation Additional equipment • Chip conveyor • Oil and emulsion mist separator • Infrared PP 60 optical measuring probe • Tool breakage control TRS2 • 4-color signal light • Extended M65 interface for Erowa Job Management System • Preparation for EROWA handling system (Operation mode 4) • Accessories: 120x SK40 tool holders Technical Specification Taper Size SK 40

Stanje: rabljeno, Leto izdelave: 2011, x-pomik 630 mm y-pomik 560 mm z-pomik 560 mm Krmiljenje iTNC 530 Heidenhain Območje vrtljajev – glavno vreteno maks. 12.000 min⁻¹ Pogonska moč – glavno vreteno 10 / 15 kW Maks. navor 130 / 87 Nm Vpenjalni sistem orodij HSK-A 63 Nagibno NC: ° Uporabna površina mize 1.000 x 600 mm Premer mize Ø 600 mm T-utori 1x 14 x H7, 8x 14 H12 Maks. obremenitev mize 500 kg Zasuk mize C: 360° Število mest za orodja 2x12 (24) poz. Vpenjalni sistem orodij HSK-A 63 Maks. premer orodja 80 mm Maks. premer orodja pri prosti sosednji odprtini 130 mm Maks. teža orodja 8,0 kg Maks. dolžina orodja 315 mm Skupna potrebna moč 45 kVA Teža stroja cca 6,8 t Fsdpfxsyz Dcfo Abtsgc Potrebni prostor cca 4,5 x 4,5 x 2,5 m CNC obdelovalni center univerzalni DECKEL MAHO - DMU 60 monoBLOCK - Zasukalna glava za rezkanje - Tropski paket

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 655 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 36 m/min, hitri pomik os Y: 36 m/min, hitri pomik na osi Z: 30 m/min, proizvajalec krmilnikov: Fanuc, model krmilnika: Fanuc 0i-MD, dolžina obdelovanca (maks.): 400 mm, širina obdelovanca (maks.): 355 mm, teža obdelovanca (maks.): 250 kg, skupna višina: 3.120 mm, skupna dolžina: 2.995 mm, skupna širina: 2.975 mm, premer vrtljive mize: 350 mm, hitrost vretena (min.): 80 obr/min, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 15 letvica, moč vretenovega motorja: 15 W, nos vretena: ISO 40, število mest v zalogovniku orodij: 40, dolžina orodja: 270 mm, premer orodja: 80 mm, teža orodja: 8 g, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Rabljen 5-osni vertikalni obdelovalni center s CNC FANUC 0i-MD Fedox N Tm Njpfx Abtjgc

Stanje: rabljeno, Leto izdelave: 1998, Technical details: Swing diameter: 830 mm Turning length: 4000 mm Fedpfowwlt Rsx Abtegc Swing diameter over bed slide: 540 mm Spindle bore: 130 mm Speed range: 2 - 1,600 rpm Rapid traverse speed: 4 / 5 m/min Feed rate: 1 - 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Space requirement approx.: 7 x 2.2 x 2 m Equipped with R&D MTC-K cycle control MULTIFIX tool holder, size D Coolant system *

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stock machine "NEW" – available at short notice! (Subject to prior sale) CNC Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Table load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot distance: 150 mm Traverse ranges: Travel paths X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y axis Roller guides in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate for milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM type) / changer: Number of magazine positions: 30 System: random Max. tool diameter: Ø75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/contin.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant unit including 300-liter tank and pumps External coolant around the spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operating panel Electronic handwheel (wired) Central oil/air lubrication Fully enclosed guard Worklight Heat exchanger on electrical cabinet Auto-power OFF function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European guidelines Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic supply pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (includes chip conveyor discharge to the left) Net machine weight: approx. 5,400 kg Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/contin.): 18.5/15 kW (FANUC motor) Tool magazine / changer: - Drum tool magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. cabling and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - ICS high-pressure coolant pump, 20 bar, for direct-drive spindles Fedpfeifn N Nsx Abtjgc - Including cartridge filter - Belt-type chip conveyor with chip cart (discharge at front to left side of machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measuring, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year 2025 – NEW) - Fully enclosed - Double gripper Available immediately

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of turret heads: 1 - Number of axes: 6 MAIN SPINDLE - Spindle nose: A2-8 - Max. bar diameter: 80 mm - Spindle drive power: 18.5 kW - Spindle speed: 4,000 rpm - Max. machining diameter: 460 mm Fgjdpox Tvkrjfx Abtoc - Minimum C-axis resolution: 0.001° TURRET - Number of positions: 12 - Number of live positions: 12 - Travel X/Z: 260 x 795 mm - Travel Y: +/- 50 mm - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW SUB SPINDLE - Spindle nose: A2-5 - Max. bar diameter: 51 mm - Max. machining diameter: 190 mm - Spindle drive power: 11 kW - Spindle speed: 6,000 rpm - Minimum C-axis resolution: 0.001° - Travel: 760 mm ELECTRICAL SUPPLY - Supply voltage: 200 V - Total connected load: 42 kVA WEIGHT AND DIMENSIONS - Footprint: 4,414 x 2,370 mm - Machine height: 2,115 mm - Machine weight: 6,200 kg OPERATING HOURS - Power-on hours: 15,525 h - Operating hours: 12,865 h EQUIPMENT - Control: Mitsubishi MSX-850II - Teach-in programming: MAPPS III - Interfaces: USB / PCMCIA / RJ45 - Tool measurement system: Renishaw - 3-color status light - Tailstock function - Coolant tank - Chip conveyor: right side - Spindle cooling - Parts catcher - Bar feeder: LNS Quick LoadSERVO 80 - Parts conveyor - Number of driven tool holders: 2 - Number of fixed tool holders: 10 - 3-jaw chuck

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.400 W, število osi: 3, This 3-axis vertical machining center, the HAAS VF-4SS, was manufactured in 2008. It offers a travel range of 1270 × 508 × 635 mm, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer featuring 40 + 1 positions and a high-speed machining package. If you are looking for a high-quality milling machine, consider the HAAS VF-4SS that we are offering for sale. Contact us for further information. • Spindle-to-table distance: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max. cutting feed rate: 20.5 m/min • Rapid traverse (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/features: • Through-spindle coolant system (21 bar) Fedpfx Absx D Irmstogc • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment: • Auger-type chip conveyor • Additional high-pressure filtration system

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, proizvajalec krmilnikov: STYLE CNC Machines, število mest v zalogovniku orodij: 24, proizvajalec motorjev: FANUC, Dostava po dogovoru Ref: 24F048 Leto izdelave: 2025 Stanje: Razstavni eksponat Specifikacije: - X-os: 4000 mm - Y-os: 1000 mm - Z-os: 1000 mm - Glavni motor 26 kW (S6) Fjdpfx Aow Ty S Ssbtjgc - 8000 vrt/min - BT-40 - Avtomatski menjalec orodij (24 pozicij) - Oddaljeni servis (IXON) + mrežna povezava - Močnejša črpalka za hladilno tekočino z brizgalno pištolo - Nadgrajeno na najnovejšo razpoložljivo programsko opremo STYLE

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, leto zadnje generalne obnove: 2025, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced Fodpfjvf E Avox Abtegc - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.