Stebrski žerjav

Vetter Typ M

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 1.850 h, nosilnost: 4.000 kg, dvižna višina: 17.900 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 2.970 mm, moč: 74 kW (100,61 KM), dolžina vilic: 1.200 mm, lastna masa: 13.300 kg, skupna dolžina: 5.545 mm, vrsta pogona: Diesel, gradbena širina: 2.400 mm, Rotating telehandler Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed category: 20 Technical condition: Very good Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 80 - 100% Gcedpfowzdplex Ab Tea Description: The MRT 1840 Easy is a rotating telehandler, ideally suited as a core job site machine or as part of a machinery fleet. This highly versatile machine can be used for numerous applications both for rental fleets and owner operations, thanks to a wide range of compatible attachments (forks, winches, work platforms, crane jibs, etc.). It essentially combines three machines in one. This telehandler is designed to guarantee maximum safety on construction sites. It is equipped with outriggers with fixed pivot points and large contact areas, as well as a load detection system that identifies overload risks. This straightforward, reliable, and versatile telehandler will quickly become one of the most sought-after machines on your job sites. 3rd hydraulic valve,

Stanje: dober (rabljeno), Na prodaju je komplet kontejnera koji se sastoji od tri 20-stopna kontejnera. Kontejneri su izolovani kancelarijski ili stambeni kontejneri, svaki sa jednokrilnim ulaznim vratima i dodatnim vratima sa vetrobranom na jednoj čeonoj strani, kao i dva nagibno-zaokretna prozora na suprotnoj čeonoj strani. Potpuno su opremljeni za upotrebu sa električnom instalacijom (uključujući razvodnu kutiju), raznim utičnicama, rasvetom i električnim radijatorima. Ranije su korišćeni kao stambeni kontejneri i nalaze se u dobrom, vodonepropusnom stanju. Poseduju 400 V spoljašnji priključak (mogućnost kaskadnog povezivanja). Cena se odnosi na paket od 3 kontejnera. Po želji je moguć transport i postavljanje na željenu lokaciju uz pomoć postojeće dizalice na vozilu. Gsdpoh Hx Nhsfx Ab Tjca Dodatni troškovi zavise od udaljenosti i potrebno ih je prethodno dogovoriti.

Stanje: rabljeno, Leto izdelave: 2020, Technical Details: Turning diameter: 670 mm Turning length: 1540 mm Control: F31iB5 Celos Fanuc 35iB5 Max. swing diameter over bed cover: 700 mm Travel paths turret no. 1 (milling spindle) x/y/z: 495 / ±150 / 1562(+164) mm B-axis rotation: -30° / +210° Rapid traverse turret 1 (milling head) x/y/z: 40/40/40 m/min Milling spindle speed: 12000 rpm Drive power – milling spindle: 20.2/18.8 kW Torque milling spindle: 120 / 44 Nm Tool interface milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool-to-tool, milling spindle: 1.25 s Spindle 1 speed: 3000 rpm Spindle 1 power: 36 / 30 / 25 kW C-axis spindle 1: 0.001° Bar capacity spindle 1: 102 mm Spindle 2 speed: 4000 rpm Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0.001° Bar capacity spindle 2: 80 mm Space requirement approx.: 7.8 x 3.6 x 2.9 m Linear glass scales on axes: X, Y Programmable steady rest: KLU-A530 & SLU-X3.2 Accessories: Chip conveyor Tool measurement Spindle load monitor Air blow system Air blow system through ICS system to the tool Spindle 1 power chuck Kitagawa 250 (B 210) mm Spindle 2 power chuck Kitagawa 250 (B 210) mm Interface for internal coolant supply 70 bar Tailstock specification for sub spindle Workpiece measurement with Renishaw OMP60 probe Detachable handwheel Workpiece and total counter Three-color signal lamp Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear viewing window Quick clamping cycles Program restart Four-color signal lamp Ethernet I/P interface Manual tool measuring arm Automatic door Oil mist separator Gsdpfx Aewl Ag Deb Toca Oil skimmer Spindle touch probe for workpiece measurement External air blow system sub spindle Spindle 1 coolant nozzle Spindle 2 coolant nozzle Coolant gun Internal coolant supply 70 bar with Knoll filtration A high-spec CNC turning and milling center with sub spindle, which can also be used with tailstock functionality. The machine has an automatic door and Matris Robot System type R-2000iC/165F.

Stanje: zelo dobro (rabljeno), a truly unique one-off piece, approx. 12 x 6 m Gsdsfi Tmcspfx Ab Tsca

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Turning-milling center Takisawa TMM 250 3, year of manufacture 2016, Fanuc control Turning length: 1300 mm Turning diameter: 350 mm Spindle speed (max.): 4000 rpm 9 axes 2 x spindles 2 x C-axis Swing diameter: 780 mm Max. turning diameter: 350 mm Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool turret: 15-station revolver – all positions driven Gcodpfx Aort Ip Nsb Toa Fully simultaneous 5-axis machining with turning/milling support. Tool changer with 30 stations Workpiece magazine, right side of the machine, with gantry handling Driven tools at the turret C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to excessive administrative expenses (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, število predalov: 16, trajanje garancije: 12 meseci, IZVLEČNI REGAL ZA STEKLO M80-16 LETO PROIZVODNJE 2025 / tovarniško nov Smo proizvajalec izvlečnih regalov za shranjevanje steklenih plošč (steklenih škatel) ali drugih materialov v obliki plošč (pločevina, kremenova sintra, polikarbonat, pohištvene plošče) Naše podjetje na Poljskem je od zašetka načrtovalo in izdelalo te regale. Materiali, iz katerih izdelujemo regale, so izdelki z ustreznimi certifikati trdnosti in so nenehno predmet nadzora kakovosti. Regali imajo obliko izvlečnih, rahlo nagnjenih predalov. Zahvaljujoč njemu lahko prihranite do 75% prostora, saj so vse predelne stene vzporedne in ločene le za 10 milimetrov. Ponujamo različne izvedbe v smislu dimenzij in zmogljivosti, po posvetovanju pa lahko izdelamo tudi skladišče z različnimi parametri ob upoštevanju vaših individualnih pogojev in želja. Nagib razponov je odvisen od sestavljanja, lahko je desni ali levi. Skladiščne regale priporočamo predvsem steklenim, kamnitim, pohištvenim in oglaševalskim podjetjem, ki skrbijo za učinkovito uporabo svojega prostora. Regali so dobavljeni v obliki paketa za samosestavo. Sestavljanje je zelo prosto, saj so nam dolgoletne izkušnje omogočile, da smo ustvarili izdelek, ki je premišljen in s pomočjo priloženih navodil za montažo ni problem sestaviti ga. Naš tehnični oddelek je vedno na voljo. Na vač zahtev, za plačilo, lahko k vam pride naš tehnik, ki bo vodil montažo TEHNIČNI PODATKI ZA REGALE M80-16 - Namen - posamezne steklene plošče 255 x 160 cm - Največja velikost steklene plošče -275 cm x 170 cm - Število predelov- 16 - Širina letve za shranjevanje stekla - 8 cm - Dolžina letve za shranjevanje stekla - 308 cm - Material, na katerem se shranjuje steklo - lesena deska 308 cm x 8 cm x 2,5 cm -Višina konstrukcije (A)-218 cm - Širina konstrukcije (B)-254 cm - Globina konstrukcije (C)-318 cm - Prostor, potreben za pravilno delovanje regala - Zahteve za podlago - gladka / ravna - Število vodilnih ležajev za predelno steno - 8 kosov - Prednje kolo - fi 160 / ojačan poliamid - Zadnje kolo - jekleno kolo z ležajem / obrača se po profilu - Barva -RAL 7040 (siva) - Zaščita pred korozijo - fosfatiranje jeklenih elementov in prašno lakiranje - Dovoljena nosilnost ene pregrade - 900 kg - Dovoljena nosilnost celotnega regala je 14400 kg - Nagib predelnih sten - levo ali desno - je odvisen od sestave - Čas montaže - 10 ur - Potrebno število ljudi za montažo - 2 osebi DOKUMENTI, PRILOŽENI REGALU M80-16 -Navodila za uporabo Gcsdpfx Aohbduzob Tsa -Navodila za namestitev - predpisana tablica -12 mesecev garancije Naše podjetje organizira tudi dostavo regala za steklo v EU in drugih državah.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Permanent overband magnetic separator, Type DMPM1200 Gcedpetxn Irjfx Ab Tea 1,800 x 900 x 220 mm ===== Massive welded steel construction Frame welded and painted RAL 7016 (anthracite grey) Magnet dimensions: 1,200 x 500 x 180 mm Drive roller + deflection roller: S235 steel, welded and machined Ø220 x 700 mm, crowned and precision-turned; shaft fixed with pillow block bearings. Drive: Flange-mounted gearmotor GEMOTEG 1.1 kW, speed 0.4-0.6 m/sec Connection: 400V, 50Hz, protection class IP54 Drive pre-wired to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU, black matt, 5.4 mm thick Belt width: 650 mm 9 pcs. TG-40 cleats, high-frequency welded Belt material: 3-ply, particularly cross-stable * Equipped with stainless steel Alligator fasteners RS125 Magnetic properties: Installed magnet core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite magnet core enclosed in soft iron, ensuring a very high permeability. Housing tightly sealed and encapsulated with 1.4301 stainless steel plate and pole shoes.

Leto izdelave: 2002, Stanje: dober (rabljeno), številka stroja/vozila: SIKBK, DEMAG KBK Crane System – Crane Runway, approx. 10x6m Load Capacity / Lifting Capacity: 500 kg (0.5 t) Technical Data of the System: • Crane runway made of Demag KBK2 rails • System is delivered complete: KBK rails, rail connectors, trolley carriages, end stops, cable festoon system, suspension brackets/hangers, etc. • Including Demag DK2 500 kg chain hoist Crane is dismantled and immediately available. Used condition, see photos. Item location: 75053 Gondelsheim Shipping via freight carrier or pick-up by appointment only. Demag KBK1, KBK2, and KBK3 rails in stock! Gjdpfx Abomqf Nbo Toca Other KBK systems also available: load capacities from 125 kg to 1600 kg. Please inquire about your required crane runway with overhang and dimensions.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Lot de 36 grues à colonne Gcsdpfx Absl R Izbj Tsa Capacité de levage de 500 kg à 2 000 kg Prix : 89 000 €

Stanje: dober (rabljeno), Leto izdelave: 2007, Electro-magnetic clamping plate including electronic polarity reversing control unit, control unit, and keypad complete. Please contact us if you are interested! Gedpjlbggtjfx Ab Toca