Aluminijast mokri separator

Ventilatorenfabrik Oelde RWA315E-AL

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Two automatic flat glass sandblasting machines from MHG are available. 1) MHG GlasMaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500 mm, max. glass thickness: 70 mm, blasting capacity: 30 m²/h, air consumption per nozzle at 4 bar: 800 l/min. Machine dimensions (L/W/H): approx. 4000 mm / 2800 mm / 1100 mm, weight: approx. 2000 kg, control system: Siemens PLC. 2) Sandblasting machine without type plate, machine dimensions (L/W/H): approx. 3200 mm / 2600 mm / 1100 mm, weight: approx. 1500 kg. Inspection on site is possible. Njdpfxsw Duvhs Abiowl

Leto izdelave: 2025, stanje: novo, Vzdrževanju prijazna naprava za odstranjevanje prahu, posebej razvita za agresiven peskalni prah z predkomoro in udarnim ločevalnikom, popolnoma sestavljena iz: a) 1 kos kartušnega suhega filtra, tip PF 1.4.B62.00 5000 m³/h (na voljo tudi druge velikosti) Sestava iz robustnega, vakuumsko tesnega 3 mm jeklenega ohišja, razdeljenega na surovi zračni prostor s filtrirnimi kartušami, filter s predkomoro in udarnim ločevalnikom ter čistim zračnim prostorom s čiščenjem filtrov s stisnjenim zrakom, vsak s posebnimi servisnimi vrati Easy Open. Nwsdpfx Aolxyhfsbisl Lijak za zbiranje prahu z režnim ventilom za odstranjevanje prahu z uporabo Big Bag vreč. Magnetni ventil s prikazom diferenčnega tlaka za optimalno nastavitev čiščenja filtrirnih kartuš. Servisna vrata kot nihajna vrata za enostavno vzdrževanje.

Stanje: novo, NEW MACHINE Nwjdeci Tlrjpfx Abisl - Wet suction available in steel or stainless steel - Extraction capacity 1,650, 3,750 or 7,000 m³/h - Motor 3, 5.5 or 15 kW

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1,500 / 1,700 / 2,200 rpm Incremental infeed: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swiveling: ±6.5° Table longitudinal travel: 1,530 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Maximum workpiece weight (unsupported): 130 kg incl. clamping Nsdpfx Abjuxftrjiswl Maximum traverse: 270 mm Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight: approx. 3.05 t Space requirement: approx. 4 x 2 m Overhauled according to Kellenberger guidelines Including new, modern, and future-proof control system. Photo shows machine already delivered with special options. - Operation via touch panel is exceptionally simple. - Symbols on the control panel are virtually identical to the original control, thus no retraining required. - Diagnostic function showing PLC messages and digital I/O. - Dressing function can be expanded or adapted as per customer request. - Spindle-oriented stop for the workpiece spindle available on request. - New maximum infeed of 40 mm, extendable on demand. - Digital readout on 2 axes. Resolution x-axis: 0.5 μm Options: - Encoder with digital display on workpiece headstock - Encoder with digital display on grinding headstock (no height adjustment with spindle possible) - New, stable internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. Machine is equipped with an electronically controlled infeed system with stepper motor drive on the x-axis. Hydraulic table longitudinal movement and rapid traverse. Flexible application in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control At present, the machine tool does not meet the basic safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum protection target must be determined via a risk assessment in accordance with BetrSichV.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 181199, Machine No.: 181199 Manufacturer: AGTOS Type: Drum Shot Blasting Machine Nwedpfx Aberq Hmzsiel Designation: TS 150-3.6-01-15.0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter plate filter Other Details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting machine Blasting media (material and size): Wire shot Blasting media amount (initial fill): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. drum load: 250 kg Max. single piece weight: 5 kg Capacity: 150 liters Max. lifting capacity of loader: 480 kg Sound pressure level without noise protection: ≤ 85 dB(A)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.600 mm, skupna širina: 1.500 mm, Vodna gravitacijska miza Naše mize so izdelane na podlagi najboljših svetovnih rešitev. Opremljene so z nadzorno omarico z frekvenčnim pretvornikom. Imajo visoko učinkovitost gravitacijske separacije na podlagi različnih gostot materialov. Nsdpfxet Ukz Es Abiewl Posebnost je sistem naklona in platoja, vgrajen v delovno ploščo mize, ki zagotavlja odlično ločevanje materialov z različno gostoto ter odpadkov. Konstrukcija mize minimizira turbulenco. Nizka turbulenca pomeni večjo učinkovitost tudi pri pridobivanju drobnih kovinskih zrn. Kontaktirajte nas.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, A stainless steel filter system with pneumatic cleaning in very good condition. Filter surface: 50 m². Material: V4A (1.4571) 316TI Installed stainless steel radial fan, drive power 22 kW; Airflow: 6,700 m³/h; Pressure: 8,000 Pa Compressed air valves: ASCO 24 Volt Number of filter bags: 48 Filter medium: not included Nsdpfx Asfg Iphobiowl Insulation: Yes With differential pressure measurement Dimensions (L/W/H): 3,000 mm / 1,700 mm / 2,100 mm (up to outlet) The filter consists of 2 modules split in the middle. Also available: stainless steel cooling screw conveyor, Ø400 mm; length 4,100 mm

Stanje: novo, Leto izdelave: 2020, Cantilever racking, single-sided, 6.30 m height, 1.20 m arms, 900 kg per arm — New —: Price ex works, including loading! 1 rack unit with 4 uprights: €3,732 (net)! Transport costs within Germany (excluding islands): €490 (net)! A galvanized cantilever racking system, consisting of: Single-sided uprights, approx. 6,300 mm high, hot-dip galvanized Base and arm depth: 1,200 mm, each with 3 height-adjustable arms Load capacity with load center at 600 mm: 900 kg per arm / 4,000 kg per upright With 4 uprights per arm level: 4 x 900 kg = 3,600 kg Nsdpfx Aefivg Sjbiswl Profiles: Frame: IPE220, Arms: IPE100 Incl. horizontal and diagonal bracing, bay width = 1,300 mm, standard is 1.30 m. Other standard bay widths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From a bay width of 1.50 m, a surcharge applies to the stated price! Custom sizes (other bay widths) are also available on request, but incur a surcharge and have longer lead times as they require custom fabrication! If you do not specify a different bay width, we will supply the racking with a standard width of 1.30 m. In that case, the length of a racking row with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipped within Germany directly from Würth), excluding floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Stanje: dober (rabljeno), Pulsotronic magnetic separator (operating manual included) Magnetic separator for e.g. material vacuum conveyors Nsded Dpvhepfx Abiowl Original price: €4,850

Stanje: dober (rabljeno), 210131 Površinski filter VARIO 2.2 z vklopno in krmilno enoto iz tovarne. Cena: po povpraševanju + DDV (stanje kot na sliki). Nwedpfxsrzrimj Abiol Moč motorja: 7,5 kW, 400 V, 50 Hz Pretok zraka: ca. 4.000 m³/h Odstranjevanje: 2 x 30 L enosmerni zabojniki Vmesna prodaja pridržana!