Zaslon za čipe

Vecoplan VSS 15/2

Stanje: delavnici obnovljeno (rabljeno), Popolnoma obnovljen transportni trak za hlode, dolžine 8 metrov Hnodpfx Afencft Ue Tog

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Double-edger and trimming circular saw with electronic control, comprising: RET straightening and feed table. Chain bed in front of the machine with a liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment is hydraulic, with electronic positioning control offering the following setting options: stepless, 1 cm indexing, and switchable to 2 cm indexing. Cutting width between the flanges 24 - 440 mm. 10 variable preset dimensions, direct input of dimensions in mm. Constant dimension allowance, shrinkage allowance in percent. Splitter wedge pair: 1 x at zero line, 1 x hydraulically adjustable separately, with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electric switch cabinet with power section and PLC control. Operator console. Slat sleeve, clamping length 403 mm. Adjustment and zeroing sleeve. Hedpfx Aown D Izsf Tong Professionally dismantled and loaded free on truck.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, For optimal recovery of non-ferrous metals or material purification Hnjdpfx Afevdqdio Teg This extremely powerful machine is primarily used for the processing of municipal waste, shredder materials, household appliances, wood, plastics, glass, IBA and bottom ash, as well as electronic waste. The IMRO non-ferrous metal separator meets the demand for very high recovery rates and high purity levels.

Leto izdelave: 2023, Stanje: novo, Max. chipping height: 200 mm Infeed width: 500 mm Feed rollers: 3 units Rotor flight circle: 600 mm Chipping length approx.: 20–30 mm Throughput – output: 16–20 cubic meters (solid/cut wood) per hour wood chips Chipper knives: 2 units Feed motors: 2 x 2.2 kW Net weight approx.: 4,100 kg Infeed: horizontal Machine frame: steel, welded with shielding gas Rotor: steel, welded with shielding gas, dynamically balanced Bearing: oversized roller bearings Bearing housings: flanged steel housings Feed rollers: steel, specially toothed Chip discharge: underneath the machine Hnodpfx Afencd Azj Tsg Machine grate (screen): for re-shredding of oversized chips Drive pulley: matched to main motor N = 1,500 rpm Hydraulic system: consisting of a hydraulic pump, membrane accumulator, cylinder, pressure gauge, and control valves for lifting the upper feed roller Feed: via two geared motors, manufacturer NORD GETRIEBE

Stanje: novo, Band Saw Machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Condition: New machine Cutting Capacity (round): 300 mm Blade Speed: 20-100 m/min, stepless Standard equipment includes: - Fully hydraulic, semi-automatic design. After starting, the machine clamps automatically; after finishing the cut, it returns to the starting position, stops the saw blade, and opens the vise. - Cutting sensor for automatic material height detection - Horizontal vise, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip cleaning brush - Measuring stop with 1,000 mm scale Hnodpfxjilg Hde Af Tsg - Coolant system - Operating manual

Stanje: dober (rabljeno), Board Sorting Line / Sorting System / Length Sorting Line Esterer Right Discharge 5 Sorting Bins Total Length 26 Meters 1st Bin: 2 Meters 2nd Bin: 3 Meters 3rd Bin: 4 Meters 4th Bin: 5 Meters 5th Bin: >5 Meters Good condition – immediately available Location: Germany, near Landau an der Isar Please also see my other listings. Hnodogw Scqepfx Af Tog I look forward to your inquiry.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Complete Weinig planing line consisting of: - Package infeed, automatic tilt destacking, baton separator. - Cross conveyor with reject separation. - Conveyor feed to twin band saw, singulation before planing machine infeed. - Throughfeed cross-cut saw, infeed to the planing machine. - Weinig 22 B planing machine with 8 spindles; electronic frequency-controlled feed up to 80 m/min. - In 2023, the planing machine was equipped with a new frequency-controlled feed unit, new table, and new wear plates. - Outfeed from the planing machine; Weinig stacking unit with lath magazine, as well as Almab stacking system. The entire planing line is fully mechanized. Specifications: - Wood length: 2.0 – 6.10 m - Wood thickness: 10 – 120 mm - Wood width: 40 – 220 mm - Package size input: 1.20 x 1.30 m; output: 1.20 x 1.20 m (W x H) Hodpfx Aewvqvbjf Teng Well-maintained system with regular servicing.

Leto izdelave: 2023, Stanje: pripravljen za uporabo (rabljen), Two Vecoplan drag chain conveyors available. 1) VKU 800, year of manufacture: 2023, drive power: 5.5 kW, belt speed: 24 m/min, conveying capacity: approx. 120 m³/h, belt width: 820 mm, max. incline: 70°, section length: 10.2 m. 2) VKU 1100, year of manufacture: 2023, drive power: 11 kW, belt speed: 24 m/min, conveying capacity: 180 m³/h, belt width: 1,150 mm, max. incline: 70°, section length: 22 m. Documentation available. Inspection on site possible. Hodpfx Aet Iw Ryef Tong

Stanje: pripravljen za uporabo (rabljen), Inexpensive separator without control cabinet, requires new belt. Hnodpjwl N Hqofx Af Tjg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Vecoplan sawmill offcut chipper 45/16/2V - German-made - Produces ideal wood chips directly for furnace use - Vibratory feed system TECHNICAL SPECIFICATIONS: - Feed width: 450 mm - Feed height: 160 mm - Number of knives: 2 pcs - Motor power: 50 kW Hnedpfxet Hr Drs Af Tjg - Rotor diameter: 500 mm - Rotor length: 475 mm - Screen size: 40 x 40 mm - Upper driven feed roller: 4 kW - Lower driven feed roller: 2.2 kW - Reversing function - Longitudinal vibrating feeder: 10,500 mm x 450 mm, 2.2 kW motor - Cross vibrating feeder: 4,500 mm x 2,200 mm, 1.5 kW motor - Total height: 2,450 mm Transport dimensions: 10,500 mm x 2,450 mm x 2,450 mm Weight approx. 4 t