Drobilnik VAZ 220/200 KNF

VECOPLAN VAZ2000MNF (VAZ220/200KNF)

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Hsdpoiyyf Iefx Agtel Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), NEUE HERBOLD Granulator Universal Mill – Heavy-Duty Version - Year of manufacture: 1998 Hjdeh Rwc Eepfx Agtel - Constructed from stainless steel - From technical center (machine was used exclusively for testing/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Leto izdelave: 1993, stanje: rabljeno, • Working width (mm): 2200 • Motor power (kW): 22 Hodpfxjn I Twyo Agtjl • Upper rollers: with PU rings • Lower rollers: corrugated • Saw shaft: included

Stanje: novo, lastna masa: 17.250 kg, največja dovoljena obremenitev: 48.700 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 17.250 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approximately 3,750 mm long - Gooseneck hydraulically liftable, lowerable, and detachable - For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Lowbed: - Lowbed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length x width approx. 7,550 mm x 2,740 mm - Mechanical locking of the extension Chassis: - Rear chassis with closed outer frame - Checker plate surface and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Hodpfx Ajh Hm Tzjgtjl Axles, Suspension, and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced steered - Burst protection valve on the axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and plug pins for securing in raised position - Final coating of axles: two coats of single-color 2-component paint in "FAY-Grey-34-0260" - Technical axle load 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 Accessories: - Detachable steel front wall, approx. 400 mm high - 4 wheel chocks - Rear upper gooseneck area closed with removable cover - 1 pair of steel ramps with climbing bars and locking bolts to bridge the lowbed mounting hooks - Ramps can be positioned over or between the hooks - Mounting options for steel drive-on ramps at the rear, between the outer beams of the gooseneck - Locking point approx. every 1,000 mm on the extension - 1 lashing ring each, left and right, on the front cross member - Supply line connection strip for tractor unit, mounted at the height of outer frame profile - 6 pairs of threaded blocks on the exterior of the load floor inner beams for attaching M24 screw rings - 6 pairs of recessed lashing rings on the outside of the load floor outer beams, foldable inwards and outwards - 1 pair of threaded blocks on the front and rear of the load floor outer beams for M24 screw rings - Mounting rail for loose aluminum approach ramps on the end cross member of the vehicle - Central lubrication system with 2 pumps, brand BEKAMAX - Remote steering front and rear, cable remote controlled, with axle tracking control - 3 kW electro-hydraulic power unit for hydraulic operations, except hydraulic winches - Removable galvanized loading floor, can be placed in 3 elements between the outer beams, with hardwood covering - Foldable extensions, approx. 230 mm per side - Loose extension boards, steel-edged - 4 warning signs approx. 423 x 423 mm - Radio remote control for rear steering - 3.5” kingpin - Anti-slip coating on the left chamfer of the gooseneck - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Guide plate from gooseneck for the fifth wheel plate, approx. 800 mm wide - 1 spare wheel with mounting adapter - Parking position on the gooseneck for warning signs when not in use - 2 pairs of stake pockets integrated into the chassis outer frame, for plug-in stakes approx. 100 x 50 mm - Excavator stick trough of rear chassis closed at the rear with a removable plate - Trailer color: Mercedes-Benz 7350 Novagrey

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, We deliver the machines wherever you require, and install them upon request by prior arrangement. Optional: Stainless steel discharge element, stainless steel storage silo, blower, and approximately 3 meters of piping. Hedpfx Ast Iw Hujgtjl Grinding mill 800 series, 22 kW or 37 kW 3 x 2 blade set configuration. Bwj3E79Mpn 2 x stators Screen deck as per your request with Variable Frequency Drive, optional Product discharge and storage available in various configurations at highly competitive prices when combined. Motor power can be adjusted. Other modifications are negotiable, such as rotor adaptations (e.g., 5 rows of blades or heavy-duty version). Delivery/timeframe to be coordinated. Please call or email us to discuss or if you have any questions. Kindly respond with your name, company name, and correct phone number. Without this information, RSS Recycling Shredders and Solutions (Netherlands) will not be able to respond.

Stanje: dober (rabljeno), Leto izdelave: 2002,

Stanje: dober (rabljeno), Leto izdelave: 1994, 2-side planer, top and bottom constant table height (consistent infeed height) maximum planing width: 600 mm Hodpfxohuthye Agtol maximum planing height: 280 mm planerheads with strip knives immediately ready for operation

Stanje: rabljeno, ENAOSNI DROBILEC WEIMA MODEL WLK15 GLAVNI MOTOR 90KW REZILA ROTORJA 50X50 (NOVA REZILA) DOLŽINA ROTORJA 1500MM Hedpfx Aotqd Ndjgtel PREMER ROTORJA 370MM STROJ JE 100% FUNKCIONALEN PRIPRAVLJEN ZA DELO

Stanje: novo, Leto izdelave: 2025, MASCHINE IST FABRNEU Hedpsrc Dkqsfx Agtol Die Maschine ist geeignet zum Verpressen von Aluminiumdosen sowie Stahldosen bis zu einer Materialstärke von 0,2 mm und einem Volumen von bis zu 3 Litern. Sämtliche elektrischen und elektronischen Komponenten stammen von den Marken Schneider und Siemens. Die Maschine ist vollautomatisch, ausgestattet mit einer SPS-Steuerung und einem Siemens HMI Simatic Touch-Panel mit Not-Aus-Tastern. Die Maschine unterliegt der Garantie von AYMAS Makina San. Ve Tic. A. S. für ein (1) Jahr oder zweitausendfünfhundert (2.500) Betriebsstunden, je nachdem, was zuerst eintritt. Je nach Einsatzgebiet ist ein Öl-Kühl-/Heizsystem enthalten. Der MB 500 Magnetabscheider und der VH (120-250) Schwingförderer sind optional erhältlich und dienen zur Trennung von Aluminium- und Stahldosen sowie zur Entfernung von Schmutz und Staub aus dem Schrott. Technische Daten: Ballengröße: 500 mm x 330 mm x ... Behälterabmessungen (Breite x Länge x Höhe): 500 mm x 1.000 mm x 330 mm Leistung: - Bis zu 1.000 kg/Stunde (Aluminium) - Bis zu 2.000 kg/Stunde (Stahl) Ballengewicht (über mechanische Wägevorrichtung): 10–20 kg Taktzeit: 30 Sekunden Stößelkraft Deckelzylinder: 25 t Stößelkraft Hauptpresszylinder: 100 t Betriebsdruck: 225 bar Maschinenabmessungen (Breite x Länge x Höhe): 1.100 mm x 4.200 mm x 2.600 mm Elektromotor: 18,5 kW Maschinengewicht: 5.000 kg

Stanje: rabljeno, No. 3176 WEINIG Hydromat 1000 Planing and Moulding Machine Used, year of manufacture 2007 6 Spindles: bottom-right-left-top-top-bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Finished lamella width: 4 - 15 mm Max. number of lamellae: 16 pcs Lamella lengths: 400 - 4000 mm 1st spindle horizontal bottom: Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool circle 125 - 180 mm 2nd spindle vertical right: Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left: 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top: 15 kW, 6000 rpm, diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle: Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment reduced to 25 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle: Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Hjdpou Agh Sjfx Agtjl Adjustment travel of feed rollers opposite left spindle, axial 35 mm Shortened roller distance opposite right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 driven, toothed rollers in outfeed table 2 driven, toothed rollers in machine table Pressure beam ahead of and discharge after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment of upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Subject to errors in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale is made in "as is" condition Technical data, description of condition, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "sold as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex site