škarje za odpadke

Lefort Reflex 900t

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 7.792 h, nosilnost: 4.000 kg, dvižna višina: 5.650 mm, težišče tovora: 500 mm, vrsta goriva: plin, Certificirano po DGUV do: 11/2025, dolžina vilic: 1.600 mm, stanje pnevmatik: 95 odstotek, lastna masa: 7.183 kg, barva: rumena, We are offering an absolutely top-class forklift from Jungheinrich. In 2021, it underwent a full 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is original and has not been resprayed or touched up! The forklift has always been kept indoors and is in excellent condition. Maintenance and safety inspection (UVV) are up to date. The manual and keys are of course included. The last major service was in October 2024 UVV valid until 10/2025 Operating hours: 7,792 (77,44 since refurbishment) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-star overhaul in 03/2021, complete with Kaup fork positioner T466 Load capacity: 4,000 kg Lift height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load centre: 500 mm Mast: Triplex with full free lift Equipment: Solo-Pilot control, road approval lighting (StVZO), LED configuration with two work lights front and rear, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, additional hydraulics with 2 functions Fedsw N Iz Hopfx Afloft Kaup fork positioner NEW 4.8T 466B Since its overhaul, the machine has only operated for 45 hours. All safety inspections and maintenance have been carried out.

Stanje: pripravljen za uporabo (rabljen), Bobenski motorji Fedpfxji A Apuo Afleft rabljeni bobenski motorji velika zaloga za širino traku 300-1400 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Mobile Shredding Machine - Used & Fully Refurbished - Arjes 760 D with Magnet - On Wheel Axle - Complete Conversion to Hydraulic Drive -- High Performance Shredder -- - The Most Powerful Shredder in its Size Class - For Heavy-Duty Applications REBUILD The machine was completely disassembled and rebuilt starting from the steel construction. Fsdsv Dtfvopfx Aflsft Conversion to a hydraulic drive system Engine: Mercedes Benz OM 471 Stage 3 350 kW / 477 HP!!! (No AdBlue Required) - Transmission: SYNCHRON: 2x125,000 Nm - Hydraulics: Bosch Rexroth -- 285 cc pump + 2x 215 cc hydraulic motors - Control System: NEW - Hydraulic Lines: NEW - Radio Remote Control: NEW - Shafts / Tools: NEW (Combination tool for wood, waste, light scrap) The machine is equipped with a post-crushing beam. WERT GmbH is a metalworking company specialized in the development and production of twin-shaft shredding tools as well as machinery refurbishment for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex, and Keestrack. With an in-house design department and a highly qualified team, we offer customized, innovative solutions that meet the highest quality standards. Our goal is to continuously meet the individual requirements of our customers through technological excellence and continuous improvement. We serve companies from various sectors including waste management, recycling, and mechanical engineering, and place great value on long-term partnerships. With our reliable and high-performance shredding solutions, we support our customers in increasing their efficiency and competitiveness.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced Fjdpjvwlqqjfx Aflsft - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Leto izdelave: 2024, Stanje: novo, Air Separators ZIGZAG Fsdpfxeua D Alo Afleft Application Description: The ZIGZAG type air separator is a device designed for cleaning materials in the waste recycling process. The separator divides light and heavy fractions using a pneumatic method. It is suitable for a wide range of waste materials with particle sizes from 0 to 150 mm. This type of air separator is used for pre-shredded, torn, or very fine materials. Thanks to our unique design, the separator features multi-point adjustment options that are crucial for the purity of the obtained fractions. ZIGZAG type separators are utilized in many fields: - density classification of metal granules - cleaning shredded scrap from light fractions (films, plastics, paper) - removal of floating fractions during WEEE recycling - cleaning of plastics, rubber - cleaning of municipal waste and glass - dust removal Construction Description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first section, the ZIGZAG module is installed. The module features an inspection opening and an adjustable material stream gap. In the second section, there is a cyclone for extracting light fractions. Below the cyclone is a rotary valve with variable speed for the discharge of separated materials. At the top of the assembly is a fan with electronic speed control. The design is partially prepared for loading and unloading via belt conveyors. The separator comes with a control cabinet equipped with a safety system.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.631 h, barva: zelen, skupna višina: 3.400 mm, skupna dolžina: 6.850 mm, skupna širina: 2.860 mm, mobilnost: mobilen, General Information Year of manufacture: 2019 Applications: Forestry and land management Technical Specifications Power: 441 kW (600 HP) Fedpfx Asw Eu Aqjflsft Number of cylinders: 6 Engine displacement: 18,100 cc Fuel type: Diesel Drive: Crawler Unladen weight: 26,700 kg Functional CE marking: yes Condition Technical condition: very good Visual condition: very good

Leto izdelave: 2024, Stanje: novo, Overview – The different variants *Not every option is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demo unit with discharge (only sketched in photo) *optional, if you want to feed with a wheel loader Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4m Equipped with 4 screens on the bottom that are extracted/suctioned. Unit price net from: €9,750 - Extraction components/hoses flat rate €945 net - Control for complete installation Unit price net: €2,750 - Demonstration extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Air flow 1850m³/400V automatic compressed air cleaning Unit price net from: €6,950 Fjdpfx Afeff Sbioloft - Bale press B 400 Bale approx. 400x400x800mm (height adjustable) Up to 30 bales per hour with approx. 20kg each from €59,995 net *A reference installation (bale press) is located at ZIP code 64579 Gernsheim Technical Data: Bale size (W x D x H): 400 x 400 x 800mm (height adjustable upon request) Bale weight approx. 20 kg (depending on material) Performance: approx. 30 bales per hour Buffer tank approx. 0.7m³ capacity Min./max. level sensors in the tank Hydraulic pre-compressor Hydraulic pressing ram Hydraulic power unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in press channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight approx. 1,500 kg mütek bale presses/packaging machines are designed for the production of bales from a variety of materials such as chopped miscanthus or elephant grass, wood shavings, sawdust and chopped straw. The machines are characterized by a robust design, ensuring consistent quality during continuous operation. The bale press compacts the material loaded into the buffer tank without binder additives by means of hydraulic pressure, and packs the material into plastic bags. The material volume can be greatly reduced with the bale press. The volume reduction ratio depends on the material. The maximum moisture content must not exceed 18% air-dried (ATRO). The buffer tank of the mütek bale press can be loaded automatically or manually and has a volume of approx. 0.7 m³. Tanks with a larger volume or with integrated extraction and filter units as complete disposal systems are also available. Besides automatic loading via dust extractors, mütek also offers loading by screw conveyors. Both variants can be equipped with automatic dedusting. mütek bale presses are equipped with a switch cabinet for control. In the standard version, bale dimensions (W x D x H) are 400 x 400 x 800 mm. Height can be customized upon request. Advantages of producing bales include: - Simple and safe storage - No loose dust - Minimization of storage volume - Reduced transport volume *Raw material requirements: - dry (max. 30% ATRO) - maximum length 35mm

Leto izdelave: 2006, Stanje: skoraj kot novo (rabljeno),

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF450HD Special Baling Press is the ideal solution for compacting challenging materials such as PET bottles, cans and metal containers, big bags, plastic canisters and plastic packaging. It is also capable of reducing used tires and car bumpers to a minimum volume. The baler impresses with its simple and safe operation as well as its large feed opening, making it perfect for medium to high material throughput. By compacting these waste and recyclable materials, you can achieve a volume reduction of up to 90%, significantly lower your disposal costs, and properly return the materials to the recycling cycle. Pressing force: 30 tons Bale weight: up to 450 kg (depending on material) Bale dimensions: 1000 H (var.) x 1200 W x 800 D mm Machine dimensions: 3343 H x 1781 W x 1196 D mm Machine weight: 1,600 kg Transport height: 2,300 mm Feed opening: 1200 W x 680 H mm Pressing cycle time: 40 seconds Motor: 5.5 kW, 16 Amp Power supply: 380 - 400 V (3-phase) Noise level: 68 dB Special features: - Extra-long double cylinders for even and early compression of material - User-friendly lever operation - Bale ejector for easy removal of finished bales - Additional retention claws to minimize material spring-back - Fixture for 4 rolls of strapping - High-quality product "Made in Europe" Suitable for compacting: - PET bottles - Food cans and tin containers - Plastic canisters and plastic packaging Fodpevug Dyefx Afloft - Used tires and bumpers - Big bags - Cardboard and film - Hard-to-compact recyclables Additional options: - Annual maintenance with UVV inspection - Machine color according to RAL - PLC control with automatic pressing cycle, bale-ready indicator and E-stop with key - Vertical door - Strapping bands / strapping wires - 11 kW, 32 Amp motor The demo video shows the BTS-MF550HD Special Baling Press. Can press, can baling press, PET baler, PET press, used tire press, tire baling press, tire press, can press, baling press, paper press, waste paper press, cardboard press, carton press, film press, paper baler, waste baling press, waste press, recyclable press, waste compactor, waste press, residual waste compactor.

Leto izdelave: 2011, Stanje: dober (rabljeno),