Drobilnik lesa Drobilnik

VECOPLAN VTH 75/30/7

Stanje: novo, Leto izdelave: 2026, CORMAK RPL380 Firewood Saw-Splitter Key features and functions of this machine: Fodpoyw I Epofx Aplspg - Productivity: Efficient operation with a throughput of up to 8 m³ of timber per hour, depending on wood type. - Multifunctionality: One device combines a chainsaw, a splitter, and a belt conveyor, which not only enhances capability but also saves time. - Versatility: Both professionals and individual users will appreciate the ability to process various wood species. - Engine: The 15 HP gasoline engine provides high power essential for efficient cutting and splitting. - Time-saving: Wood processing time is significantly reduced thanks to the integration of three functions in one device. - Reliability: The machine is designed for use in sawmills, the wood industry, and for firewood or construction timber production. - Equipment: The machine features a STIHL guide bar, and the oil reservoir for the bar is located at the rear of the housing. - Precision: The cross wedge enables efficient splitting of wood and cutting to an exact desired length. - Adjustment: Wedge height can be conveniently adjusted to the log diameter using a lever. - Safety: Operator protection is ensured by built-in safety systems and guards. - Mobility: Thanks to a wheeled chassis and ball hitch, the machine can be easily relocated between job sites. - Belt Conveyor: The belt feeds wood into the splitter and then outputs the split pieces. It can be folded in half as well as set in a vertical position. - Certifications: The saw-splitter has the required CE quality certificates and full technical documentation (DTR). Powerful hydraulic pump (24L capacity) drives: ✅ Feeding conveyor ✅ Cutting saw ✅ Splitting cylinder with up to 20T of force ✅ Discharge conveyor The combine is equipped with a 9-step adjustable splitting cross, allowing wood of various diameters to be split into 2 or 4 pieces. ✅ Cutting length adjustment ✅ Log holding grip ✅ Central chain lubrication system Technical Specifications Engine Engine model: Lancin G420F Engine power: 9.0 kW (15 HP) Displacement: 420 ccm Fuel: Petrol Fuel tank capacity: 5.4 L Starting system: Electric starter / manual pull-start Recommended engine oil: 15W40 (1.7 L) Hydraulic system Hydraulic oil tank capacity: 24 L Recommended hydraulic oil: HL46 / HL32 Performance and Cutting Parameters Max splitting force: 20 t Splitting wedge: 4-way Max log diameter: 380 mm Min/max cut length: 190 mm – 600 mm Bar length (chainsaw): 18" (45 cm bar) Productivity: approx. 8 m³/h Feeding Conveyor Length/height: 1000 mm / 910 mm Conveyor dimensions (L x W): 1040 x 254 mm Max conveyor incline: 40° Discharge Conveyor Discharge belt dimensions (L x W): 3200 x 254 mm Discharge belt speed: 27 m/min Wheels and Tyres Size: 135/70R12 Pressure: 2.5 bar Dimensions and Weight Machine dimensions: 6600 × 1380 × 2000 mm Weight: 680 kg

Leto izdelave: 2001, stanje: dober (rabljeno), HSM-500.1_VL BALER PAPER BALER FILM BALER Immediately operational, good CONDITION Used & good / see photos Model: HSM 500.1 VL Machine No.: 6135.244.P Serial No.: 220109689 Press force: 50 tons Voltage: 400V; Frequency: 50 Hz Power: 7.5 kW Current: 15.5 A Fpjdpfslc Du Nsx Apleg Compression force: 6 tons Year of manufacture: 2001 Additional balers available in our other listings Item used and in good condition / roughly cleaned (Plug in and ready to operate) Dimensions: On request!! Additional photos show potential usage options. All items visible in the photos are also available from us. Price quoted is net per unit Ex works 47441 Moers Current stock: 1 unit Inspection is expressly offered. More machinery in stock See photos or enquire by phone General information: We offer items acquired from various liquidations, described to the best of our ability, and provide clear photos. Further details about the item cannot be provided. We offer the opportunity for viewing by appointment on Tuesdays and Thursdays between 9 am and 4 pm. If needed, the item can be taken immediately. We can only respond to enquiries about this listing if you provide a telephone number due to time constraints. Unless explicitly stated otherwise, this listing concerns USED GOODS. Packaging may be damaged. Items have been visually inspected and are technically sound as far as can be determined. All offers are ex warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. If interested, feel free to call. All dimensions are approximate. Errors and omissions excepted.

Stanje: novo, Leto izdelave: 2025, Brugger PX10 drobilnik lesa poganja traktorska kardanska gred in lahko obdela lesena debla do premera 10 cm. Robustna konstrukcija in kakovostni materiali zagotavljajo zanesljivo delovanje. S hidravličnim pogonom je učinkovit za obdelavo lesa v različnih kmetijskih in gozdarskih aplikacijah. - Ročno podajanje Fpodpsw Dnwfefx Aplog - Premer do 10 cm - Teža 165 kg - Hitrost kardana: 540 vrt/min - Moč traktorja: 15–65 KM ---- Kontaktirajte nas za ponudbo po meri! Cena + DDV Za podjetja z ID za DDV izstavimo račun brez DDV.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Bale press BTS-MF75 in stock and available for immediate delivery The BTS-MF75 is the ideal baler for compacting your loose cardboard and film waste into a bale weighing up to 75 kg. With a suitable pressing insert, it is also suitable for compressing individual metal and plastic containers, as well as cans. The bale press impresses with its easy and safe operation alongside its large loading aperture. By compacting these waste/recyclables, you achieve a volume reduction of up to 90%, significantly lower your disposal costs and ensure material is properly returned to the recycling loop. Pressing force: 3.5 tonnes Bale weight: up to 75 kg (depending on material) Bale size: 1000 H (var.) x 700 W x 500 D mm Machine dimensions: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (if required) Filling opening: 700 W x 698 H mm Pressing time: 24 seconds Motor: 1.5 kW 13 amp Power supply: 230 V (single phase) Noise level: 68 dB User-friendly lever operation Bale trolley for removal of bales Retention claws to reduce spring-back of material Holding device for strapping bands Quality product “Made in Europe” Suitable for compacting: Cardboard Film Cans and light metal containers Canisters and light plastic containers Clothing Lightweight recyclables Additional options: Annual maintenance with safety inspection (UVV) Machine colour according to RAL Can-crusher insert PLC control system with automatic press cycle, bale ready indicator, and key-operated emergency stop Fpjdpfxeut Tk Hs Apleg Bale ejector with strap + PLC (instead of bale trolley) Strapping bands Power supply 380–400 V (3-phase) Bale press, paper press, waste paper press, cardboard press, cardboard baler, film baler, paper bale press, waste bale press, waste press, recyclable press, waste compactor, bin press, residual waste press

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF500LH is the ideal baler for compacting your loose cardboard and film waste into bales of up to 500 kg. Its compact design makes it particularly suitable for areas with restricted ceiling heights. The baler impresses with its straightforward and safe operation, as well as its large feed opening. By compacting these waste/recyclable materials, you achieve up to 90% volume reduction, significantly lower your disposal costs, and properly reintegrate the material into the recycling stream. Fpedpfsvugzfox Aplog Pressing force: 50 tonnes Bale weight: up to 500 kg (depending on material) Bale size: 1100 H (variable) x 1400 W x 800 D mm Machine dimensions: 2249 H x 2041 W x 1350 D mm Machine weight: 2,100 kg Transport height: 2249 mm Feed opening: 1400 W x 680 H mm Press cycle time: 35 seconds Motor: 11 kW, 32 amp Power supply: 380 – 400 V (3-phase) Noise level: 68 dB PLC control with automatic press cycle, Bale-ready indicator and key-operated emergency stop Bale ejector system for easy bale removal Retention claws to minimize material spring-back Low overall height, perfect for areas with restricted headroom Operating hours counter Holder for 6 rolls of strapping material A quality product “Made in Europe” Suitable for compacting: Cardboard Plastic film Big bags Cans and PET bottles Light recyclables Additional options: Annual maintenance with safety inspection (UVV) Machine colour according to RAL Strapping bands Baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, recycling baler, refuse compactor, waste compactor, general waste press.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The BTS-MF40 is the ideal baler for compacting your loose cardboard and film waste into a bale of up to 40 kg. The baler stands out for its simple and safe operation, making it perfect for low material volumes and for producing compact, easy-to-handle bales. By compacting these waste/recyclable materials, you achieve up to 90% volume reduction, significantly cut your disposal costs, and return the material properly to the recycling process. Pressing force: 2 tons Bale weight: up to 40 kg (material dependent) Fjdpfx Apju Iwgvsljpg Bale size: 600 H (var.) x 535 W x 460 D mm Machine dimensions: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Feed opening: 522 W x 490 H mm Pressing time: 20 seconds Motor: 1.5 kW, 13 Amp Power supply: 220 - 240 V (single phase) Noise level: 68 dB User-friendly lever operation Bale trolley for bale removal Retainer to reduce material spring-back Holder for 2 rolls of strapping A quality product “Made in Europe” Suitable for compacting: Cardboard Plastic film Cans and light metal containers Canisters and lightweight plastic containers Textiles Light recyclables Additional options: Annual maintenance with safety inspection (UVV) Custom machine colour (RAL) Can press insert AUTO control with automatic press cycle Strapping bands Power supply 380 - 400 V (3 phase) Baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, compactor, recycling press, waste compactor, refuse baler

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The BTS-MF40 is the ideal baler for compacting your loose cardboard and film waste into a bale of up to 40 kg. The baler impresses with its simple and safe operation, making it optimal for small material volumes and for producing compact, easy-to-handle bales. By compacting these waste/recyclables, you achieve a volume reduction of up to 90%, significantly cut your disposal costs, and properly return the material to the recycling loop. Pressing force: 2 tonnes Bale weight: up to 40 kg (material dependent) Bale size: 600 H (var.) x 535 W x 460 D mm Machine dimensions: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Feed opening: 522 W x 490 H mm Press cycle time: 20 seconds Motor: 1.5 kW, 13 amps Power supply: 220 – 240 V (single phase) Noise level: 68 dB User-friendly lever operation Bale trolley for bale removal Fpsdpfjvahudex Aplsg Retainers to reduce material spring-back Holder for strapping bands A quality product "Made in Europe" Suitable for compacting: Cardboard Film Cans and light metal containers Canisters and light plastic containers Clothing Light recyclables Additional options: Annual maintenance with UVV inspection Machine colour as per RAL Can pressing insert Automatic control with automated press cycle Strapping bands Power supply 380 – 400 V (3 phase) Baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, waste press, recyclables press, waste compactor, rubbish press, residual waste compactor

Stanje: rabljeno, Leto izdelave: 2012, stiskalna sila: 4 t, HSM V-Press 504 Baler – Used The HSM V-Press 504 vertical baler is a compact yet highly efficient machine designed for compressing cardboard and foil waste. With its robust construction, simple operation, and modern control system, this model is an ideal solution for manufacturing companies, warehouses, retail stores, and logistics centers generating significant amounts of packaging waste on a daily basis. Manufactured by the renowned German brand HSM, this baler guarantees reliable operation and extended service life. Key advantages of the baler: - 40 kN pressing force – effective waste compression, enabling volume reduction of up to 95%. - Efficiency and ergonomics – the compaction process starts automatically after closing the door, and the ram automatically returns to its starting position. - Modern control system – microprocessor with membrane keypad and graphic text display ensures easy process monitoring. - Double-door system with lever – safe and convenient operation even under heavy use. - Compact bales up to 60 kg – facilitates transport and storage of processed materials. - Integrated bale ejector – enhances operator safety and work comfort. - Energy-efficient operation – 1.1 kW motor provides full functionality with low energy consumption. - Sturdy, durable construction – ensures reliability over prolonged use. Offer includes HSM V-Press 504 baler: • Product code: MTP006524 • Condition: used • Year of manufacture: 2012 • Model: V-Press 504 • Width: 102 cm Fjdpfx Apsyim Ayolopg • Depth: 81.5 cm • Height: 193 cm • Weight: 290 kg • Power: 1100 W • Voltage: 230 V Net price: €2,859 per unit * Large quantities available; price negotiable for bulk orders. * Delivery available across Europe. * Price does not include delivery costs. * Location: Chmielów/Tarnobrzeg, Poland.

Stanje: novo, Leto izdelave: 2026, Engine power: 21 HP Splitting force: 20 tonnes LONCIN engine Operating pressure: 16–20 MPa Cylinder: Ø 101.6 x 610 mm Maximum log diameter: 480 mm Maximum log length: 610 mm Cycle time: 6–8 s Return time: 3 s Splitting wedge: 6 arms OREGON guide bar: 56 cm (22 inches) Chain: 74 links, 19 mm (0.75 inches) Saw/splitter drive: Hydraulic motor/gear pump Conveyor belt: 6800 x 250 x 4 mm Tyres: 33 cm (13 inches) Shipping dimensions (W x L x H): 2250 x 1000 x 1200 mm Total weight: 790 kg Fjdpjyx D Dwsfx Aplspg 20-ton splitting force – efficient operation even with larger logs. Combustion engine – independence. Suitable for mains and field operation. Hydraulic feed and pressure regulation – stable material guidance and increased safety. Discharge angle adjustment – precise control of material ejection. Hydraulic guide and lifting adjustment – convenient positioning for work tasks. Cutting and splitting function – one machine for two essential steps in wood processing. Robust construction – durable frame for intensive use. Ergonomic operation – intuitive controls and high operator comfort. Versatile use – suitable for field operations, firewood processing, and heavy-duty tasks. Wedge blade, 8-piece – Price €130 (extra charge). Wedge blade, 4-piece – Price €100 (extra charge). Hydraulic wood feeder for firewood processing machines – Price €1,150 (extra charge).