Stroj za struženje, vrtanje in odrezovanje

VDF Lynette

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 240 mm, izvrtina vretena: 58 mm, premer struženja nad ležiščem sani: 430 mm, višina središča: 215 mm, stružna dolžina: 760 mm, poteza s peresom: 127 mm, premer tulec: 58 mm, skupna dolžina: 1.885 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.680 kg, nosilec puše: MK 4, Centre height: 215 mm Centre distance: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Weight approx. 1680 kg Equipment includes, among others: Hardened and precision-ground Z-axis guideways Turcite coatings (on counterface) of the cross and top slides Tedecir Anopfx Abgof Manual central lubrication with a pump for longitudinal and cross slides Complete coolant system with rear splash guard and slide splash protection Chuck guard Control bar with 3 adjustable cams Machine lamp Fixed centre Set of machine mounting plates

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,39 kW (25,00 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rdeča, lastna masa: 2.150 kg, dvižna moč: 980 kg/m, dvižna višina: 2.500 mm, velikost pnevmatike: 31X15,5-15, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, konfiguracija osi: 2 osi, število sedežev: 1, emisijski razred: Euro 5, širina izkopne žlice: 1.500 mm, Leto izdelave: 2025, gorivo: dizel, nosilnost: 980 kg, Oprema: dodatne luči, hidravlika, kabina, pogon na vsa štiri kolesa, spojka prikolice, standardna žlica, vilice za palete, zapora diferenciala, The H&R Wheel Loader 2210-B35 (Wide Track) – a compact loader with a wide track for increased stability. The new 3-cylinder Perkins turbo engine with 18.5 kW (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the compact loader 2210 B35 reaches approximately 16 km/h and is easy to operate. Thanks to the large steering angle of 42° and a small turning radius, it is very well suited for operation in confined spaces. The yard loader comes standard with a pallet fork and a standard bucket, so you can start working immediately. With the 3rd and 4th hydraulic control circuits, a variety of attachments can be operated. The hydraulic quick coupler allows fast and convenient changing of front attachments. With high lifting capacity, the HR 2210 loader can also lift heavy loads of up to 980 kg to a height of 2.53 m. Standard wide tires (31x15.5-15) provide especially secure footing. The E-shift on the joystick ensures particularly comfortable operation of the HR 2210-B35. H&R loaders are technically and visually optimized in-house and thoroughly tested. Each machine additionally receives comprehensive corrosion protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. We provide a TÜV Süd certificate for each machine, enabling individual operating approval according to §21 StVZO (road registration / operating permit as a self-propelled working machine). Key Features of the H&R 2210-B35 Wheel Loader • Full equipment • Wide track for greater stability • Extensively optimized in Germany • Pallet fork included, manually adjustable • 150 cm standard bucket included • Comfort cab with heating, ventilation, and radio • Rear view camera with display • Joystick with float function and E-shift • Additional hydraulics for front attachments, 3rd and 4th circuit • Hydraulic oil cooler • Brake inching pedal • Trailer hitch for towing • Rotating beacon • LED work lights front & rear • Wide tires 31 x 15.5 -15 • Adjustable steering column and seat • Hour meter and fuel gauge • CE-compliant according to EU machinery directive • 1 year spare parts warranty Price Net: €22,945.00 VAT: €4,359.55 Gross: €27,304.55 Financing possible! Optional 2-year warranty €590.00 TÜV road registration / operating permit for working machine €595.00 Transport within Germany and Austria available at extra charge Todperhh Sqofx Abgjf Technical Data Engine: 3-cylinder Perkins Turbo (25 HP) Lifting capacity: 980 kg Lifting height: 2530 mm (bottom edge of standard pallet fork) Dump height: 1956 mm (standard bucket, tipped) Lift / Lower time: 4.0 / 3.5 seconds Dimensions: approx. 3380 x 1496 x 2340 mm Weight: 2160 kg Bucket width: 150 cm Tires: 31x15.5 -15 Spare parts and accessories available. Please provide your phone number with inquiries!

Stanje: zelo dobro (rabljeno), Four-jaw chuck, make Roto Record Model DHK 315 x 4 Short taper size 8 Taper diameter 139.735 mm Bolt circle diameter 171.4 mm Diameter 315 mm Tsdpfeg Rxh Iex Abgjf Jaws individually adjustable

Leto izdelave: 2007, Stanje: rabljeno, Wheel diameter - max. 400 mm Wheel width - mm Module - max. - Workpiece diameter 36–300/400 mm Centre distance 135–290 mm Spindle speed - infinitely variable, up to 3,000 rpm Centre distance between centres 100–550 mm Control system Machine weight approx. 4,000 kg Space requirement approx. 2,000 x 3,055 x 2,788 mm Todpfx Ajgr Harsbgof Control system: CNC Siemens 840 D Testing methods: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli test in double flank contact Features: - Up to 6 testing carriages available - Highest test accuracy and repeatability - Machine table with workpiece drive - Swivelling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Stanje: novo, Swing diameter 420 mm Turning length 1500 mm Swing diameter over cross slide 250 mm Swing diameter in the bed gap 590 mm Center height 210 mm Turning length in the bed gap 260 mm Spindle speed(s) 16 (45-1800) rpm Tailstock taper MK 4 Quill stroke 120 mm Quill diameter 50 mm Spindle nose DIN ISO 702-2 No. 6 Spindle bore 52 mm Spindle taper MK 6 Longitudinal feed 17 / 0.05 - 1.7 m/min Face feed 17 / 0.025 - 0.85 m/min Total power requirement 4.6 kW Machine weight approx. 1340 kg Space requirement approx. 2440 x 915 x 1375 mm Fully equipped lead and feed screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage Tjdpfx Absk Egrpogjf - Handwheels with adjustable fine graduation 0.04 / 0.02 mm - Four-way tool post - All guides adjustable with gib strips - Top slide adjustment range ± 90° - Guaranteed spindle nose concentricity better than 0.015 mm - Main spindle runs in oil bath - Gear wheels smooth-running, hardened and ground, mounted with 2 adjustable precision taper roller bearings - Handwheels decoupled and tested to EN 23125 - Two-channel right-left selector switch tested to EN 23125 - Switches with life cycle calculation, tested to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI adjustable via control panel shift lever, no change gears required - Forward/reverse on carriage operable via shift spindle - Central lubrication in carriage - Machine base and bed cast as single Meehanite piece - Leadscrew cover - Emergency stop pedal - Safety handwheels with disengagement function in X and Z axes - Tailstock adjustable ± 10 mm for taper turning - Tailstock quill and handwheel with adjustable fine graduation 0.025 mm - Rapid, simple, tool-free adjustment via clamping lever - Strongly ribbed prismatic bed, induction-hardened and precision ground, made of cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy and complete draining and cleaning to DIN standard - LED machine lamp at chip guard Models TH 4210D and TH 4215D with digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed and glare-free - Glass linear scales Scope of delivery - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MK 6 / MK 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial machine fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw lathe chuck, self-centering, Ø 250 mm Quick-change tool post SWH5-B set

Stanje: rabljeno, Leto izdelave: 1987, Lead and Feed Screw Lathe Manufacturer: Boehringer Model: DUE 560 Year of manufacture: 1987 Used Technical specifications: Turning diameter: 250 mm Turning length approx.: 1200 mm Swing over bed: 560 mm Swing over cross slide: 365 mm Max. workpiece between centers: 500-800 kg Spindle diameter in front bearing: 100 mm Tedpfx Abstud S Uogjf Spindle bore: 62 mm Spindle nose: DIN 55022 No. 8 Travels Cross slide travel: 345 mm Top slide travel: 125 mm Tailstock/quill diameter: 80 mm Tailstock taper: MT 5 Quill stroke: 190 mm Longitudinal feed: 60x0.0315-28 mm/rev Cross feeds: 60 x 0.016-14 mm/rev Thread pitch capability: 0.125-112 mm Total connected load: 20 kW Space requirement approx. 3.5 x 2.0 x 2.2 m Weight: approx. 2.5 t

Stanje: rabljeno, Leto izdelave: 1989, Universal tool milling machine Brand: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function on X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) Tedsr En Dyopfx Abgsf - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating manual Used, sold as seen, without warranty The technical condition of the machine corresponds to the standard of its year of manufacture.

Stanje: rabljeno, Leto izdelave: 1956, številka stroja/vozila: 17179, Heavy-duty lathe, lathe, turning machine, engine lathe, geared head lathe - Manufacturer: Meuser, geared head lathe model M3A - Turning length: 1,400 mm - Swing over bed: 550 mm - Swing in gap: 800 mm - Swing over cross slide: 300 mm - Spindle bore: Ø 58 mm - Spindle speeds: 15 - 810 rpm - 3-jaw chuck: Röhm Ø 250 mm - Faceplate: 500 mm - Accessories: incl. tool holder/tools, see photos - Tailstock taper: MK5 Tedpfxjh Uuzye Abgef - Dimensions: 2770 x 1070 x H1310 mm

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 280 mm, izvrtina vretena: 58 mm, premer struženja nad ležiščem sani: 470 mm, višina središča: 235 mm, stružna dolžina: 1.000 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.150 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.800 kg, nosilec puše: MK 4, Centre height: 235 mm Centre distance: 1000 mm Tedpfx Aecirnijbgof Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Equipment includes, among others: Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surfaces) of the carriage and cross slide Manual central lubrication with a pump for the longitudinal and cross slides Complete coolant system with rear splash guard and carriage splash protection Chuck guard Control rod with 3 adjustable cams Machine lamp Fixed centre Set of machine mounting plates

Stanje: dober (rabljeno), Centre height: 205 mm Centre distance: 1500 mm Swing diameter over bed: 410 mm Spindle bore: 47 mm Spindle mount: Size 6 Tailstock taper: MT 4 Spindle speeds: 28 - 1250 rpm Feeds (longitudinal/cross): 0.03-1.3 / 0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space requirement: 2800 x 1100 x 1600 mm Tedpsv Du Ixefx Abgef Weight: 1330 kg