Center stružnica

VDF-HEIDENREICH & HARBECK 18 RO

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Grinding area: 2000x900mm, cross travel: 875mm, longitudinal travel: 2450mm, distance from table to spindle center: 845mm, magnetic chuck dimensions: 2000x800mm, max. table load: 2.3t, longitudinal axis feed: 1000–30,000mm/min, cross axis feed: 0.01–2000mm/min, vertical axis feed: 0.001–1500mm/min, grinding wheel dimensions: 500x100x203.2mm, grinding spindle motor power: 22kW, length: 6800mm, width: 3450mm, weight: 13t. An on-site inspection is possible. Gjdpfeuyk N Isx Anfobl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Stroj za zgibanje za 8 strani! Gjdpfx Asw I S Eyjnfjbl Proizvajalec: HEIDELBERG-Stahlfolder Tip: TI 52-4 - 4 - RD Format: 520 mm Leto izdelave: 2010 Št. stroja: 1224431350 - Neprekinjen podajalnik - Dvojni sesalni podajalni valji - 1. zgibna postaja 52 cm, 4 žepi - 2. zgibna postaja 52 cm, 4 žepi - Ohišje proti hrupu - Osrednja kontrolna postaja za vse funkcije - Standardna dostava - Kompresor - Orodja, tehnična dokumentacija Cena na zahtevo, FCA ex DK Razpoložljivost: takoj! Prosimo, zahtevajte dodatne podrobne slike! Video na voljo!

Stanje: rabljeno, Leto izdelave: 1974, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 300 mm Turning length: 2,100 mm Distance between centers: 2,000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1,800 / 18 steps rpm Rapid traverse X-axis: Slide 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 180 mm Control voltage: 220 V Approx. machine weight: 3.25 t Approx. machine dimensions LxWxH: 3.5 x 1.2 x 1.6 m Thread cutting possible, e.g. metric threads, module threads, and inch threads Cross slide rapid traverse Chuck guard 2x chip pans Gjdpfx Ansu Ix Dcjfobl Accessories: (see comparable on photo) 2x steady rests (1x closed and 1x open) Face plate 3-jaw chuck Jaw sets Flange Centers various gears

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 82 mm, premer struženja: 820 mm, stružna dolžina: 6.000 mm, GURUTZPE lathe, model Super A, with 6,000 mm between centers, swing over bed 820 mm, swing over carriage 550 mm, swing in gap 1,150 mm, spindle bore diameter 82 mm, powered carriage, 16 speeds from 9 to 500 rpm, equipped with 3 fixed steady rests. Gbjdpfov Rm Iwsx Anfol

Stanje: novo, Leto izdelave: 2026, The ZX7045 B1 DRO milling and drilling machine is an advanced tool designed for precise metalworking. It is perfect for drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as threading up to M12 mm. Thanks to its milling capacity of up to 80 mm in width and keyway milling up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version features automatic spindle feed, increasing work efficiency. Additionally, it is equipped with digital readout for enhanced operational accuracy and a cooling system to maintain optimal temperature during processing. The machine is ready for immediate use and available from stock. Ideal for professionals seeking high quality and performance in metalworking. Product features: - HEAVY, STABLE CAST IRON BASE - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT ADJUSTED ON THE SUPPORT, NOT ON THE COLUMN - ADDITIONAL LIQUID COOLING - MASSIVE CROSS TABLE WITH PRECISELY GROUND SURFACE - DOVETAIL GUIDEWAYS - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT SPINDLE ROTATION - SWIVEL HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - DIGITAL READOUT - Optional base available TECHNICAL DATA: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 45 mm Face milling cutter diameter: 80 mm End mill diameter: 28 mm Spindle speeds: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) Spindle taper: MT 4 Spindle feed: 125 mm (automatic feed) Table size: 820 mm x 240 mm Base dimensions: 580 mm x 600 mm Max. spindle-table distance: 445 mm Spindle-column distance: 260 mm Traverse X/Y/Z: 515/175/430 mm Quill feed rate: 0.12; 0.18; 0.25 mm/rev Head swivel left/right: 90° Motor power: 1.8 kW (2.5 HP) Power supply: 400 V Weight: 350 kg Available equipment: - MK4/B18 drill chuck arbor - Digital readout - Hand tools - Drill chuck 3–16 mm/B18 Gedpfx Anjud H H Uofsbl - MK4/MK3 reducing sleeve - MK3/MK2 reducing sleeve - Operating instructions in English

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 690 mm, izvrtina vretena: 150 mm, premer struženja: 1.040 mm, premer struženja nad zgornjim sanežem: 690 mm, višina središča: 500 mm, širina na sredini: 2.000 mm, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 160 mm, pomik po osi Z: 380 mm, prehod palice: 55 mm, Centre height: 500 mm Distance between centres: 2,000 mm Maximum turning diameter On cross slide: 690 mm Over bed: 1,040 mm In bed gap: 1,070 mm Bed width (hardened ways): 670 mm Gap length: 480 mm Gap length in front of faceplate: 320 mm CARRIAGE Bed guide length: 1,020 mm Cross slide travel: 640 mm Compound rest travel: 360 mm SPINDLE Spindle nose: ASA 15'' Spindle bore diameter: 150 mm Front bearing size NN: 200/310/82 mm Rear bearing diameter NNU: 190/260/69 mm Internal taper in reduction sleeve: Morse No. 6 Spindle speeds: 24 Speed range: 4 to 800 rpm THREADING Threads: 398 Metric: 0.5 to 224 mm Module: 0.25 to 11 mod. Whitworth: 56 to 1/8 tpi Diametral pitch: 112 to 1/4 DP Gbedsyhhuwspfx Anfol FEEDS Number: 108 Longitudinal, cross, compound: 0.05 to 22.4 mm/rev RAPID TRAVERSE Longitudinal, cross, and compound: 2,500 mm/min Longitudinal return: 5,000 mm/min TAILSTOCK Quill diameter: 130 mm Quill taper: Morse No. 6 Quill stroke: 420 mm STEADY RESTS Steady rest capacity on bed: 140 to 500 mm Steady rest capacity on carriage: 40 to 350 mm PERMISSIBLE LOAD Overhung: approx. 1,500 kg Between centres, without steady: approx. 5,000 kg Between centres, with steady: approx. 6,000 kg Machine weight: approx. 7,800 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Transporter za ostružke Visokotlačna črpalka (HP) Zbiralnik kosov Gbedpfx Ansyf Dtqefjl Vmesnik za podajalnik palic Orodja

Stanje: rabljeno, Leto izdelave: 1998, Premer struženja nad ležiščem: 0400 mm Premer struženja nad suportom: 260 mm Dolžina struženja: 1500 mm Višina konic: 200 mm Razdalja med konicami: 1500 mm Vrtina vretena: 50,8 mm Obrati: 20–3150 min⁻¹ Pomiki vzdolžni suport: 0,01–3,24 mm/obrat Pomiki prečni suport: 0,005–1,62 mm/obrat Teža stroja pribl.: 2 t Prostorska zahteva pribl.: 3,35 x 1,4 x 1,9 m Obratovalna napetost: 400 V Priključna moč: 7,7 kVA Gbodpfx Aexp Rzbonfel Z vpenjalom, Multifixom in digitalnim prikazovalnikom.

Stanje: novo, Leto izdelave: 2026, Premer struženja nad ležiščem: 0400 mm Premer struženja nad podporo: 246 mm Dolžina struženja: 1250 mm Višina konic: 195 mm Premer vretena: 54 mm Pogonska moč: 7,5 kW Gsdpfx Asxcyxconfebl - Nova stroj - s 2-osnim digitalnim prikazovalnikom ACU-RITE, vklj. konstantno rezalno hitrost, nameščeno na suportu, hitromenjalno držalo orodja MULTIFIX velikost MB * Za več informacij o natančni serijski opremi in razpoložljivih možnostih obiščite našo spletno stran ali nas neposredno pokličite *

Stanje: rabljeno, Leto izdelave: 1998, Tehnične podrobnosti: Premer struženja nad posteljo: 600 mm Premer struženja nad suportom: 400 mm Dolžina struženja: 2000 mm Višina konic nad suportom: 300 mm Razdalja med konicami: 1600 mm Hitrosti vrtenja: 3 - 2.500 vrt/min Vpenjalni konus lunete: MK 5 Gbsdpow Rkt Ijfx Anfol Premer izvrtine glavnega vretena: 62 mm Hod pinole: 190 mm Vzdolžni pomiki: pribl. 0,001-10 nastavljivo mm/obrat Prečni pomiki: pribl. 0,001-5 nastavljivo mm/obrat Hitri pomik X-os: do 5000 m/min. Skupna potrebna moč: 40 KVA Teža stroja pribl.: 5,6 t Dimenzije stroja pribl. DxŠxV: 4,0 x 2,0 x 1,9 m Vključno z dodatno opremo, glej fotografijo