Strug vodeni z vezave ciklov

VDF Boehringer DNE 820/DL 5000

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Table clamping surface: 765 x 400 mm Travel paths x/y/z: 650/410/510 mm Spindle taper: BT 40 Min./max. distance table/spindle: approx. 90/690 mm Spindle speeds: 80 - 8,000 rpm Number of tool stations: 20 units Fsdstwy Dispfx Aamjpl Feed rate: approx. 30 m/min Rapid traverse: approx. 30 m/min Electrical connection: 380 V, approx. 15 kVA Required space: 2,300 x 2,100 x 2,650 mm Weight: 4,000 kg

Stanje: rabljeno, Technical Details: Table diameter: 450 mm Table rotation – manual/mechanical: 360° Tilting clamping table: 90° mechanical Machine weight approx.: 100 kg Dimensions: L: 800 x W: 700 x H: 400 mm The surface of the rotary table is hand-scraped. Excellent condition! Micrometer-precise locking Fedpeu N D Ayofx Aamepl Positioning accuracy within the 0.01 mm range T-slots arranged radially according to DIN 650 Base clamping: 16 mm (6 bores)

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: nepreverjeno, Tukaj vam ponujamo vrtljivo mizo znamke Parkson. Model je PAR-251 R Fpjdpfxextu Efs Aamjl Premer vrtljive mize je približno 250 mm. Kontaktirajte nas za neobvezujočo ponudbo.

Stanje: rabljeno, Swing diameter 2000 mm Turning height 1800 mm Control system Siemens Sinumerik 840 Dsl Spindle speed range 2.8-315 rpm Cross rail adjustment - vertical 1200 mm Cross rail adjustment - horizontal +/- 1150 mm Tool slider - vertical travel 1500 mm Tool slider section 240 x 240 mm Minimum plunge diameter 340 mm Cutting force 50 kN Torque at faceplate 50,000 Nm Speed range level 1: 2.8 - 80 rpm Speed range level 2: 12 - 315 rpm Fodpfx Aaey Dvlqomopl Maximum clamping weight 12,000 kg Faceplate drive power 105 kW Machine weight approx. 33 t Space requirement approx. 10 x 5 x 6.5 m Additional Technical Data: - Feed range (three-phase servo motors): 1-3000 mm/min; 0.01-50 mm/rev - Cross rail travel speed: 425 mm/min Equipment / Accessories - Increased turning height (+600 mm) - Extension of Z-axis to 1500 mm - Tool magazine positions: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement - Renishaw touch probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Refurbishment: - Extensively refurbished in 2012 by Siemens Industry Munich - Among other things, the following were reconditioned: control system, wiring, motors, measuring systems, etc. - Further information can be found in the PDF

Stanje: zelo dobro (rabljeno), potovalna razdalja osi X: 1.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 750 mm, širina mize: 1.500 mm, dolžina mize: 850 mm, največja hitrost vrtenja: 2.500 obr/min, poteza s peresom: 120 mm, SHW UF 5 Travel distances • X-axis (rotary table): 1,500 mm • Y-axis (spindle vertical): 1,000 mm • Z-axis (spindle horizontal): 750 mm Control • CNC control: Heidenhain TNC 355 Automatic Universal Milling Head (switches between horizontal and vertical machining) Quill: 120mm Spindle taper: SK 50 Spindle speed: 2,500 rpm Partial overhaul in 2014 • Year of manufacture: 1990 • Inspection/Servicing 2025 Table assembly • Travel: X = 1,500 mm • Clamping surface: 1,500 x 800 mm Chip conveyor Splash guard enclosure We stock ALL spare parts for this SHW UF 5 series! Fjdpfxjvfm I To Aamopl About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, supply of spare parts, on-site customer service, machine overhauls, and control retrofits. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control retrofit _____ Used machine - used milling machine - used bed type milling machine - universal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used drilling and milling machine - used milling machine for metal - used metal milling machine - used cnc milling machine - cnc milling machines - milling machine - large part machining - cnc large component machining - milling - shw - uf5 - uf 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM milling machine - MBM machine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 3.300 obr/min, moč vretenovega motorja: 30.000 W, skupna masa: 9.100 kg, proizvajalec krmilnikov: MAZATROL, model krmilnika: Mazatrol Matrix, število osi: 3, This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It is equipped with a Mazatrol Matrix control unit, offering a maximum swing over bed of Ø 830 mm and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power output of 30 kW. The machine comes fitted with a chip conveyor and a tool presetter. If you are looking for high-quality turning capabilities, you should consider the Mazak QT Nexus 350 II M we have for sale. Contact us for further information. Additional Equipment • Chip conveyor • Tool presetter • Autoblock chuck • Tool holders • User and maintenance manuals Machine Advantages Technical Machine Advantages • Max. turning diameter: Ø 420 mm • Max. turning length: 1500 mm • Bar capacity: Ø 102 mm • Spindle nose: ASA 11" • Chuck type: Autoblock Ø 315 mm • Tool size: 25 × 25 mm / Ø 50 mm • Driven tooling motor power: 7.5 kW Fodjx D I Rispfx Aamjpl • Max. speed of driven tooling: 4000 rpm Additional Information The machine is still under power

Stanje: rabljeno, Leto izdelave: 1973, Spindle diameter: 130 mm X travel: 3,000 mm Y travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal travel: 3,000 mm Y – Spindle housing vertical travel: 2,000 mm Z – Spindle stroke: 1,000 mm Table size (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./Max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 – 2,000 mm/min Rapid traverse for spindle headstock and column: 5,000 mm Quill feed: 0.5 – 1,200 mm/min Fedpot Hwt Sefx Aamepl Spindle speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: • Heidenhain 3-axis digital readout, hardened guideways, ball screws • Infinitely variable spindle speeds and feeds, individually motorized feed drives • Operator’s traveling platform, pendulum panel control, manual hand panel, platform • Hydrostatic column displacement • Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (H), one side face machined • Hydraulic clamping for column/carriage, motorized tool clamping • Extensive accessories including tool holders with and without tools • Separate chip extraction system, clamping aids, 1 clamping angle plate and plates, and much more

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm Control Fanuc MSX-701III Maximum turning diameter: 660 mm Maximum turning length: 1498 mm Swing diameter over cross slide: max. 400 mm Spindle speed: 3000 rpm Tool magazine with 40 stations Turret with 10 positions Total connected load: 90 kVA Machine weight approx. 26.6 t Space required approx. 5301 x 2997 x 2788 mm Capacity: Swing diameter over cross slide (Tool spindle 1): 750 mm Swing diameter over cross slide (Turret 2): 400 mm Max. turning diameter (Tool spindle 1): 660 mm Max. turning diameter (Turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Fpjdpfx Aasy Spuuemel Axes travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120°, full B-axis 1° indexed and 0.0001° clamped X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (sub spindle): 1610 mm Rapid traverses: (X1, Z1) 50 m/min., (Y, X2, Z2, SZ) 30 m/min. Main and sub spindle: Infinitely variable spindle speeds (Spindle 1 + 2): 30-3000 rpm C-axis (Spindle 1 + 2): 0.001° Main spindle motor: 22/18.5 kW Sub spindle motor: 22/18.5 kW Torque (Spindle 1 + 2): 1000 Nm Disc turret: Number of tool stations: 10 Speed of driven tools: 6000 rpm Drive power: 5.5/3.7 kW Milling spindle: Tool holder: HSK A63 Max. speed: 12000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40 positions Tool diameter: 70/140 mm Tool length: 400 mm Tool weight: 8/10 kg Total connected load: 90 kVA Overall dimensions (L x W x H): 5301 x 2997 x 2788 mm Machine weight: 26.6 t Equipment/Accessories: - Upper milling spindle (B-axis), full 4th axis, positioning 0.0001° - 40-position tool magazine - Lower 10-position turret, all positions driven - 2 x 3-jaw quick change chuck KNCS-N 315/91 - KNOLL high-pressure coolant system, pressure selectable 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter unit - Chip conveyor - Blow-off system for main spindle chuck (M-function control) - Blow-off system for tool cutting edge (M-function control) - Coolant gun incl. accessories - Oil mist extraction - Direct measuring system for X1, X2, Y axis - Bar feeder interface - Dual foot switch for both spindles - Islands and pockets programming for MAPPS - High speed fixed cycle for MAPPS - Program memory extension to 8 MB - Program restart - 3-stage signal lamp - Memory card 512MB (CF Card) - Measuring arm (image) for tool measurement in machine - Tool holder + case, reduction sleeves, driven tools - Jaw set - Collet set

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, stružna dolžina: 700 mm, potovalna razdalja osi X: 205 mm, pomik po osi Z: 700 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.800 mm, skupna dolžina: 6.000 mm, skupna širina: 3.900 mm, skupna masa: 9.800 kg, Complete machining with double spindle, upper and lower turret Fsdsyn Em Repfx Aamspl Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg load capacity Chip conveyor Paper band filtration system with pressure tank Max. turning diameter: 400mm X-axis travel: 205mm Z-axis travel: 700mm Spindle bore: 62mm Spindle speed: 6000 RPM Spindle power: 22kW Sub-spindle speed: 6000 RPM Sub-spindle through hole: 62mm Sub-spindle power: 15kW Tool changer: 16 positions Driven tool speed: 6000 RPM Lower turret positions: 16 Driven tool speed: 6000 RPM Driven tool power: 7kW Chip conveyor: yes Tool Eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is provided in good faith, however, accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contract terms. We recommend that you verify all key details yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 2.500 mm, hitro pomikanje X-os: 35.000 m/min, hitri pomik os Y: 40.000 m/min, hitri pomik na osi Z: 40.000 m/min, skupna širina: 5.800 mm, skupna višina: 4.500 mm, skupna dolžina: 13.500 mm, dolžina mize: 10.000 mm, širina mize: 1.250 mm, Travelling column – high performance, precision, and metal removal capacity Linear RAM guide combined with HDS hydrostatic guidance ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 positions, L = 400 and Ø 250, max. 35 kg Filtration with high-pressure coolant (IKZ) 15 bar Chip conveyor BLUM 3D touch probe Wide bed, linear guided in X-axis, traverse path W = 930 mm Rotary table drive prepared in control cabinet X-axis: 8,000 mm Y-axis: 1,300 mm Z-axis: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Fpodpfx Aeyr Dmdeamel Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: 40 ISO/Bt/Mk X-axis feed: 35,000 mm/min Y-axis feed: 40,000 mm/min Z-axis feed: 40,000 mm/min Milling head auto-index: 0.001 x 0.001 degrees Operating hours: 3,800 h Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual conditions are implied. We recommend verifying all critical details.