Stroj za odstranjevanje napak

URBAN SCHURING KFM 5000

Stanje: novo, Leto izdelave: 2025, TFON Sistem za zaokroževanje robov in obdelavo površin. Sistem, zasnovan za vrhunsko vsestranskost in natančnost, je namenjen obdelavi materialov iz črnega jekla, aluminija in nerjavnega jekla v razponu debelin od 0 do 120 mm. Omogoča napredno zaokroževanje robov ter čiščenje površin, posebej prilagojeno zahtevnim industrijskim aplikacijam. Ustreznost materiala: - Črno jeklo - Aluminij - Nerjavno jeklo Razpon delovne debeline: Ijdsi E Tkaspfx Ah Aotr - 0 – 120 mm Zaokroževanje robov: Sistem zagotavlja zaokrožitev robov z radijem 2 mm, kar omogoča gladke, varne robove, ki prispevajo k izboljšani estetiki in funkcionalnosti obdelovanca. Precizno upravljanje: Integriran Siemens avtomatizacijski sistem zagotavlja natančen in konsistenten nadzor nad celotnim postopkom obdelave. Neodvisne obdelovalne postaje: Več postaj omogoča hkratno ali zaporedno obdelavo, kar poveča fleksibilnost delovnega toka in prilagodljivost konfiguracije linije. Izbira dimenzij delovne mize: Na voljo z delovno širino 650 mm, 1000 mm ali 1300 mm – možnost optimalne prilagoditve različnim potrebam proizvodnje. Tipi miz: Na voljo so magnetne, vakuumske ali kombinirane magnetno-vakuumske mize, ki zagotavljajo varen in prilagodljiv oprijem za različne materiale in dimenzije obdelovancev. Tehnologija plazme in kisika: Napredni plazemski in kisikov sistemi učinkovito odstranijo grobe ostružke in žlindro po razrezu ter zagotovijo čistejšo površino. Čiščenje površine: Zanesljivo odstranjuje umazanijo, rjo, oksid in lusko. Pripravi obdelovance za nadaljnje postopke, kot sta varjenje ali premazovanje. Zaokroževanje robov za premazovanje: Rezultat so enakomerni, brezhibni robovi, ki so idealni za potrebe barvanja in premazovanja. Industrijska uporaba: Jeklarski servisi, energetika, rudarstvo, gradbeništvo, avtomobilska industrija – za zahtevne naloge in visoko zmogljivost. Enakomerni rezultati zaokroževanja: 8 lamelnih kolutov zagotavlja dosledno zaokrožene robove na vsakem kosu. Pnevmatski oscilacijski sistem: Podaljšuje življenjsko dobo brusilnega traku in skrbi za stalno kakovost z zmanjševanjem obrabe preko pnevmatskega osciliranja. Zasnovan za industrijsko natančnost. Izdelan za vzdržljivost. Prilagodljiv različnim vrstam uporabe. TFON – odličnost v zaokroževanju robov in pripravi površin.

Stanje: novo, Leto izdelave: 2025, skupna dolžina: 1.450 mm, skupna širina: 800 mm, skupna višina: 1.800 mm, skupna masa: 500 kg, moč: 4,75 kW (6,46 KM), FC 120 ZK Working capacity: Ø 120x120 mm, Number of belt stations (Z): 1, Number of brush stations (K): 1, Abrasive belt dimensions: 120x1850 mm, Brush belt dimensions: 120xØ200 mm, Abrasive belt speed: 20 m/s, Brush belt speed: 15 m/s, Feed speed: 12 m/s, Abrasive belt motor per head (x1): 3 kW, Brush motor per head (x1): 1.5 kW, Feed motor: 0.25 kW, Total power: 4.75 kW, Current consumption: 12A, Dust extraction port per head Ø (2x): 80 mm, Dimensions: 1450x800x1800 mm, Itsdpfet D D Nzsx Ah Asr Weight: 500 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, delovna širina: 1.100 mm, skupna masa: 1.300 kg, širina obdelovanca (maks.): 600 mm, priključek za stisnjen zrak: 6 letvica, najv. debelina pločevine: 40 mm, število prejšnjih lastnikov: 1, vrsta nastavitve višine: električni, dolžina mize: 3.000 mm, višina mize: 850 mm, širina mize: 600 mm, trajanje garancije: 3 meseci, Mode of operation: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EC Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating instructions: 1x manual Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design, each with 6 tools, drive power 1.3 kW per unit; speed frequency-controlled 100–300 rpm, disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (highly wear-resistant design) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Ijdow U A Dmepfx Ah Astr Control voltage: 24 Volt DC Infinitely variable feed 0.5–5 m/min, frequency-controlled, automatic workpiece thickness adjustment with start-up switch (Joucomatic), 400 mm outfeed table with integrated brush for conveyor belt drive 0.25 kW, DC brake Height adjustment gearbox, vacuum blower, unit locking, belts replaced – machine is fully operational and in very good technical condition. Set according to manufacturer’s specifications/standards. Sale includes a mechanical functional warranty of 3 months from delivery.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, nosilnost na odsek shranjevanja: 15.003.000 kg, skupna dolžina: 3.280 mm, skupna višina: 2.870 mm, skupna širina: 3.300 mm, višina police: 80 mm, trajanje garancije: 12 meseci, dolžina police: 1.540 mm, nosilnost: 18.000 kg, nosilnost na konzolno roko: 15.003.000 kg, skupna masa: 2.500 kg, obremenitev na par nosilcev (maks.): 3.000 kg, širina okvirja: 3.300 mm, število vrst polic: 10, Regal za pločevinaste liste / sistem za podporo skladiščenja jekla z veliko nosilnostjo Obremenitev na polico: 2 spodnji polici z nosilnostjo 3000 kg Iodpfxsxhd Tbe Ah Aetr 8 polic z nosilnostjo 1500 kg Glavne značilnosti: - Vrata regala so opremljena z varnostjo pri izvleku police, polica ima blokado v zaprtem in izvlečenem položaju - Vodila okvirja in vrat so povezana, tako da se polica izvleče na kolesih - Polica se izvleče v celotni globini (100%) V specifikaciji regala so navedene konkretne vrednosti; možno je prilagoditi izdelek individualnim potrebam stranke.

Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 2.300 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 630124, DEBURRING MACHINE MANUFACTURER: ERNST / Sematec MODEL: ATLAS EBR YEAR OF MANUFACTURE: 2013 Condition: used Operating hours: 2,300 hours Working width: 1,500 mm Max. feed-through: 1,520 mm Workpiece thickness: 1–100 mm Feed rate: 0.5 – 4.0 m/min, infinitely variable Conveyor belt: rubber Working height: 1,000 mm Max. part weight: 160 kg/m² Deburring roller: 420 mm diameter 50 oscillating strokes per minute Drive motor: 15 kW Abrasive size: 1,540 mm x 1,540 mm ATLAS Brush Module-SPIN 2 rotating brush units: 300 mm x 260 mm Vacuum system for small parts: 200 mm wide, 80 x 80 mm Infeed table (L x W x H x Working width x Sheet thickness): 2,704 x 385 x 1,650 x 0.8–100 mm Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8–100 mm Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8–100 mm Discharge belt cleaning: 2,704 x 290 x 1,650 x 1,500 x 0.8–100 mm Deburring module power supply (kW/Air pressure/Extraction m³/h/Weight): 16 / 32 / 6/80 bar / 2,500/25 / 400 kg Brushing module: 12 / 24 / 6/80 / 2,500/725 / 1,600 kg Rotor module: 20 / 40 / 6/10 / 4,500/25 / 1,800 kg Discharge module: 1 / 2 / - / - / 400 kg Operating voltage: 400 V / 50 Hz Special voltage: 480 V / 60 Hz Control voltage: 24 V Compressed air: 6 bar, dry and oil-free Feed rate: 0.5–4 m/min, stepless 1.0–8 m/min, stepless (option) Working height: 1,000 mm External filter is not included in the sale. Working width: 1,500 mm, max. thickness: 100 mm, the vacuum track runs the full width of the machine. The first unit is a grinding roller (sponge rubber roller with abrasive paper and pneumatic tension), which can also oscillate and levels the burr. The second module consists of two steel wire brush rollers to round off or remove burrs. This is followed by a rotor module (rotating multi-brush head) for fine edge rounding. EC Declaration of Conformity. A dry dust extractor is not included but we can offer you a suitable system immediately (OPTION). Operating manual included. Isdpfxjxuu Dkj Ah Astr The machine is sold without an infeed roller conveyor!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Boschert Brushing Deburring Machine Model K3 for deburring straight sheet metal edges and at the lateral aggregate suitable for cut-outs and notches up to 70 mm depth as well as outside radii on sheet metal. 3 motors, each 1.5 kW Brush diameter: 300 mm Brush material: wire brushes VA/steel Material thickness range: 0.8–8 mm Machine dimensions: Ijdpstr Avijfx Ah Ajtr Width: 1400 mm Height: 580 mm Depth: 670 mm Base frame: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down as sheet guide The sheet edge is deburred simultaneously from above and below as it is guided through the machine. For heavy burrs, the motors can be switched to operate together so that both remove the heavy burr from above. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table extension serves as a storage surface.

Stanje: pripravljen za uporabo (rabljen), Continuously adjustable bevel angle from 30° via 45° to 60° Iodpeuriv Ajfx Ah Astr Bevel width for workpiece thicknesses of 2.5 mm: 0 - 10 mm Tool diameter: 170 mm Speed: 2800 rpm Drive motor: 380 V, 550 W Required space: 500 x 390 x 370 mm

Stanje: rabljeno, Leto izdelave: 2023, Condition: Used Year of manufacture: 2023 Stock number: 5542 Delivery time: Prompt, subject to prior sale Country of origin: Italy Price: €11,600 Available in stock: 1 Working width: 1300 mm Sheet thickness range – mild steel: 150 mm Brush diameter: 150 mm Vacuum area: 250x350 mm Table height: 945 mm Motor: 0.75 kW Length: 1400 mm Width: 1000 mm Isdpfx Aewiryhsh Astr Height: 1450 mm Weight: 300 kg Demonstration machine / as new condition Net price (original price €13,600.00) The Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding, and polishing for a range of materials – stainless steel, steel, copper, brass, and aluminium. The grinding head with two rotating tools (grinding disc or brush) is mounted on a swivel arm. The Easy T features an infinitely adjustable speed and a vacuum system, enabling the workpieces to be fixed securely to the table. It is a cost-effective and efficient solution for conventional grinding and deburring. All edges of the workpiece are processed from every angle and direction. The grinding head can be rotated by 180°, allowing for quick tool changes. Features: * Grinding pressure applied manually * Easy operation, low operating costs The flap brush ensures precise rounding of the edges of the workpiece. Standard brushes have a diameter of 150 mm. For deburring, a support pad with a grinding disc is used. Depending on the height and hardness of the burr, the grinding disc can be set at a slight angle to apply greater pressure to the burr.

Stanje: nepreverjeno (rabljeno), Serija 41 WRD netestirana, na voljo po ugodni ceni. Ijdpfxoxwbb Uj Ah Ajtr

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Uporabljan stroj za brušenje/finiranje kotov pločevine Fintec 130 naprodaj Vključeni rezervni brusilni trakovi Itedpfxowbhtno Ah Ajr Idealno za pločevinaste omarice