Prevoznik avtomobilov
Unsinn UA 2615-14-13 260X155X15CM 1400KG

Name: Unsinn UA 2615-14-13 260X155X15CM 1400KG
Brand: Unsinn
Price: 3437 EUR
Availability: InStock

Fiksna cena plus DDV

3.437 €

Stanje

Novo

Lokacija

Isselburg

Prevoznik avtomobilov Unsinn UA 2615-14-13 260X155X15CM 1400KG

Unsinn UA 2615-14-13 260X155X15CM 1400KG

Podatki o stroju

Oznaka stroja:: Prevoznik avtomobilov

Proizvajalec:: Unsinn

Model:: UA 2615-14-13 260X155X15CM 1400KG

Stanje:: novo

Cena in lokacija

Fiksna cena plus DDV

3.437 €

Lokacija prodajalca:: Dekkers Waide 17, 46419 Isselburg, Nemčija

Pokliči

Tehnične podrobnosti

Lastna masa:: 370 kg

Največja dovoljena obremenitev:: 1.030 kg

Skupna masa:: 1.400 kg

Dolžina tovornega prostora:: 2.600 mm

Širina tovornega prostora:: 1.550 mm

Višina nakladalnega prostora:: 150 mm

Prostornina tovornega prostora:: 0,8 m³

Barva:: srebrn

Gradbena višina:: 780 mm

Delovna širina:: 2.050 mm

Podrobnosti ponudbe

ID oglasa:: A17611333

Referenčna številka:: UNA114261515-01

Posodobitev:: nazadnje dne 05.11.2024

Opis

Hydraulics, automatic reversing, hot-dip galvanising, lowering loading platform / 1400 kg axle / Includes 100 km/h, * AVAILABLE IMMEDIATELY * incl. lowering loading platform / 1400 kg axle / Includes 100 km/h

Technical data:
- Type: New vehicle
- Inspection (TÜV): New/2 years
- Availability: IMMEDIATE!
- Permissible total weight: 1400 kg
- Unladen weight: 370 kg
Isdpfxou Hrwgs Ab Aoib
- Payload: 1,030 kg
- Internal dimensions: 260 x 155 x 15 cm (L x W x H)
- Total external dimensions: 403 x 205 x 78 cm (L x W x H)
- Loading edge height: 46 cm
- Tyres: 195/50R13C steel rims
- Brakes: Yes
- Jockey wheel: Yes, automatic
- 100 km/h approval: included!
- Including vehicle registration documents

Vehicle construction:
- Floor: 18 mm multiplex wooden floor
- Side walls: Powder-coated black steel profile
- Side wall height: 15 cm
- Chassis: Low-loader, lowerable, ALKO rubber suspension axle
- Tipping function: lowerable
- Hydraulics: Hand pump
- Driving angle: approx. 6°
- Wheel chocks: none
- Overrun device & brakes: ALKO
- Frame/chassis: Welded, hot-dip galvanised steel frame
- Lashing rings: 8 foldable
- Winch: at extra cost
- Supports: rear support
- Ramps: with drive-on tip at rear
- Lighting connector: 13-pin
- Registration: ZBII & COC documents

Standard equipment:
- 3-sided structure of robust, galvanised and powder-coated steel profile in black grey (RAL 7021)
- Full-width driving ramp enables loading over the entire width of the loading platform
- Shock absorbers + 100 km/h approval
- Socket options on all corners for e.g. tarpaulin frame
- Foldable license plate holder
- Sturdy plastic mudguards
- 8 foldable lashing rings in the side wall profile
- 1 lashing ring in the front wall profile
- 1 lashing ring on the rear centre of the loading platform
- Reinforced, automatic jockey wheel for safe parking of the loaded trailer
- Made of multi-glued anti-slip phenolic board, 18 mm, seamless, anti-slip and waterproof
- Driving angle when tipped approx. 6°
- Hand pump with hydraulic lowering and lowering lock
- Rear number plate holder, swivels away for loading
- Automatic reversing
- 13-pin plug
- Reversing lights
- Large-size safety lighting
- Integrated rear fog light
- Rear frame lighting recessed
- Central automatic jockey wheel
- Registration documents: ZBII and COC

Optional accessories – inquire for details:
- Anti-theft device
- Spare wheel
- Storage box
- High tarpaulin
- Additional lashing rings
- Reversing lights
- Lashing straps
- More available

New vehicle with warranty and inspection. We are happy to offer you financing to suit your needs!

Descriptions and images are protected by copyright!!

Over 800 trailers available for immediate delivery!
We have over 30 years of experience as authorised dealers/service and repair workshop/delivery across Germany (extra charges may apply) for brands including Brian James, Humbaur, Hapert, Unsinn, Cheval Liberte, Koch, Debon, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix.

Anhänger Zentrum BAUMANN GmbH
Dinxperloer Str. 389
46399 Bocholt

Subject to errors, omissions, and prior sale.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2017

402 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 2874 ... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Stropno dvigalo, dvoranski žerjav, tirnica 14260mm ABUS Hallenkran Brückenkran Kran ELV 5t ELK 5000Kg 5t Funk Portalkran Kran

Gondelsheim

576 km

Stropno dvigalo, dvoranski žerjav, tirnica 14260mm
ABUS Hallenkran Brückenkran Kran ELV 5tELK 5000Kg 5t Funk Portalkran Kran

17.250 €

Fiksna cena plus DDV

Pokliči

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, številka stroja/vozila: NOH366, ABUS ELV žerjavna steza, mostni žerjav, halni žerjav, žerjav Žerjav je na voljo 3x v enaki izvedbi! Nosilnost / dvižna kapaciteta 5t - 5000 kg Tirnica 14.260 mm, zunanja mera cca 14.500 mm Leto izdelave 2003 z brezžičnim upravljanjem in talnim rezervnim upravljanjem Dvižna višina 6m Gradbena višina zgornji rob žerjava do kljuke cca 900 mm Dolžina glavnega nosilca z blažilnikom cca 280 cm Dodatni podatki sledijo Žerjav je razstavljen in takoj na voljo Zelo dobro stanje, preizkusna knjiga je na voljo Na voljo so tudi stebrni in stenski vrtljivi žerjavi Demag KBK in Abus HB sistemi ter Errikla, Hadef, Stahl KT 2000 itd. Dostava po prevozniku je možna, prosimo povprašajte glede na poštno številko Prevzem osebno je zaželen Iiodpfx Abjxtyvpe Asb

Poglej podrobnosti

Mali oglas

Dizelski agregat Mercedes-Benz OM444A - 450 kVa

Boxmeer

900 km

Dizelski agregat
Mercedes-BenzOM444A - 450 kVa

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 1988, obratovalne ure: 9.999 h, Funkcionalnost: nepreverjeno, skupna masa: 3.500 kg, vrsta goriva: dizel, barva: modra, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, nazivna moč: 360 kW (489,46 KM), nazivna (navidezna) moč: 450 kVA, skupna dolžina: 3.200 mm, skupna širina: 1.340 mm, skupna višina: 1.800 mm, največja hitrost vrtenja: 1.500 obr/min, vrsta hlajenja: voda, Znamka: Mercedes Benz - Stamford Model: 450 kVA dizelski agregat Leto izdelave: 1988 Serijska številka: Na zahtevo Delovne ure (prebrane): Neznane Kapaciteta (kVA): 450 Kapaciteta (kW): 360 Znamka motorja: Mercedes Benz Model motorja: OM444A Gorivo: Diesel Znamka alternatorja: Stamford Model alternatorja: HC534C Napetost: 220 - 380 Frekvenca (Hz): 50 Obrati/min: 1500 Iiedpfx Aoydk Dgob Asb Amperi (A): 684 Dimenzije DxŠxV (mm): 3200 x 1340 x 1800 Teža (kg) cca: 3500 Količina na zalogi: 1 Izdelano v: Nemčija Komentarji: Zelo dobro optično stanje, število delovnih ur neznano, twin turbo.

Poglej podrobnosti

Mali oglas

Tračne žage - vodoravno BERG & SCHMID GBS 305 HA-I Easy

Nemčija

650 km

Tračne žage - vodoravno
BERG & SCHMIDGBS 305 HA-I Easy

Pokliči

Stanje: novo, Cutting capacity at 90°: round 305 mm Iiodpfx Abed Iipxj Asb Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice - Heavy-duty, large material support - Automatic coolant system

Poglej podrobnosti

Mali oglas

Vijačni stožčasti zobniki Industrijski zobniki ASUG Penig Flender TGL 21815 10LA1 280/400x80

Radeberg

561 km

Vijačni stožčasti zobniki Industrijski zobniki
ASUG Penig FlenderTGL 21815 10LA1 280/400x80

Pokliči

Leto izdelave: 2016, stanje: novo, 1 piece of factory-overhauled, unused industrial bevel helical gearbox by ASUG, TGL 21815. All gearbox components have been replaced, except for the housing! Claw coupling: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil fill: 170 kg Iijdegwlrdjpfx Ab Asb Input speed (n1): 1400 rpm Output speed (n2): 17.5 rpm Weight: 1,450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Base length: 1,170 mm !! Gearbox is supplied WITHOUT oil cooler !!

Poglej podrobnosti

Mali oglas

Peč za čredo na vozičku Nabertherm W 1000/A

Nemčija

650 km

Peč za čredo na vozičku
NaberthermW 1000/A

Pokliči

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Volume: 1000 l, maximum temperature: 750°C, heating capacity: 40 kW, machine dimensions (L/W/H): approx. 2500 mm / 1600 mm / 1900 mm, weight: approx. 2000 kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Iiedpfxsw Emyzs Ab Aeb

Poglej podrobnosti

Mali oglas

Električna delovna ploščad Genie Runabout GR-20 Genie GR-20

Dortmund

807 km

Električna delovna ploščad Genie Runabout GR-20
GenieGR-20

Pokliči

Mali oglas

Hessisch Oldendorf

788 km

Presejalni obrat
KleemannMMS802i EVO2

Pokliči

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 94 kW (127,80 KM), vrsta goriva: dizel, skupna masa: 34.000 kg, Leto izdelave: 2022, obratovalne ure: 1.238 h, Maximalna zmogljivost: pribl. 500 t/h Največja vhodna velikost: 800 x 500 x 300 mm Višina nalaganja: pribl. 3.570 mm Višina nalaganja pri zloženi zadnji steni: 2.830 mm Volumen lijaka: 9,1 m³ Širina x dolžina odvzemnega traku lijaka: 1.400 x 4.500 mm Tip presejanja: Dvonadstropno grobo presejalno sito Površina sita zgornje nadstropje: 1.550 x 4.880 mm (Š x D) Iijdpfx Ajxl Szzjb Aob Površina sita spodnje nadstropje: 1.550 x 4.500 mm (Š x D) Trak za drobni material, širina x dolžina: 1.200 x 4.380 mm Odvodni trak za drobni frakcijo, širina / dolžina / izhodna višina: 900 x 7.760 / 2.960 do 3.980 mm Odvodni trak za srednjo frakcijo, širina / dolžina / izhodna višina: 900 x 7.760 / 2.310 do 3.630 mm Odvodni trak za grobo frakcijo, širina / dolžina / izhodna višina: 1.400 x 6.065 / 2.650 do 4.050 mm Pogonski koncept: dizelsko-hidravlični Proizvajalec agregata: John Deere Moč pogonskega agregata: 94–98 kW Dimenzije za transport: 15.840 x 3.000 x 3.400 mm (D x Š x V) Transportna masa: 34.000 kg

Poglej podrobnosti

Mali oglas

Tychy

532 km

Uravnoteževalni stroj
SCHENCKHM60U

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 1.800 h, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 20.000 kg, skupna širina: 3.000 mm, skupna dolžina: 9.000 mm, skupna višina: 3.000 mm, vrsta vhodnega toka: Enosmerni tok, SCHENCK, HM60U, največji premer 3000 mm, največja teža rotorja 20.000 kg, Nova merilna enota CAB920 SmartTouch (2025) SCHENCK, Zaščitni ohišje vključeno, znak CE, certifikat o kalibraciji februar 2026, pogon 75 kW z visokohitrostnim menjalnikom s 3 prestavami, par valjčnih ležajev za premer čepa 50 - 200 mm, par valjčnih ležajev za premer čepa 200 - 400 mm, sistem za mazanje za vozičke z valji. Iodpsylin Hsfx Ab Aeib

Poglej podrobnosti

Mali oglas

Sosnowiec

557 km

CNC stružnica
STYLE510

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, obratovalne ure: 20 h, premer struženja nad prečnim suportom: 300 mm, stružna dolžina: 1.350 mm, premer struženja: 510 mm, izvrtina vretena: 50 mm, največja hitrost vretena: 2.500 obr/min, moč vretenovega motorja: 7.500 W, hitri pomik os Y: 8 m/min, hitri pomik na osi Z: 8 m/min, vrtljajska hitrost (min.): 2.500 obr/min, hod vretena: 160 mm, premer tulec: 75 mm, poteza s peresom: 160 mm, premer nihanja nad prečnim premičnikom: 300 mm, hitrost pomika os X: 2 m/min, hitrost podajanja osi Y: 2 m/min, teža obdelovanca (maks.): 600 kg, premer struženja nad zgornjim sanežem: 300 mm, skupna masa: 2.700 kg, montažni premer: 40 mm, Oprema: dokumentacija / priročnik, Style CNC is a company specializing in the production of CNC lathes and milling machines for single or small batch production. If you operate a tool shop, prototyping workshop, or provide services with very rapid turnaround times, Style is an excellent solution. Iiedpfx Abow Eum Ao Ajb The intuitive graphical software allows you to write a program directly on the machine's touchscreen in just a few minutes… Currently, we have a Demo machine for sale with a limited number of dry running hours. The machine is sold with a full 12-month warranty, including installation and training. Style CNC has its own service branch in Poland.

Poglej podrobnosti

Mali oglas

Center stružnica Weiler Condor 81 Geometrisch Überholt

Ubstadt-Weiher

585 km

Center stružnica
WeilerCondor 81 Geometrisch Überholt

Pokliči

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm Iiodpfx Abswrm Dts Aeb >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Poglej podrobnosti

Oglašujte tukaj