Jeklena ravna paleta

Unbekannt unbekannt

Stanje: rabljeno, Leto izdelave: 2026, Tukaj ponujam napravo za pripravo peska zaradi likvidacije podjetja. Vključno z upravljalnikom. Stroj je še priključen in je deloval do zaprtja podjetja. Lastna demontaža. Dodatne fotografije, informacije ter možnost ogleda na zahtevo. Lahko pošljete svojo cenovno ponudbo. Lastna demontaža. Demontažo je možno organizirati ob prevzemu stroškov. Fpedpfx Ahjzb Ef Homeh Prodaja SAMO podjetjem. Izdani bo račun z DDV. Brez garancije ali jamstva.

Stanje: rabljeno, SPECTRO SPECTRO MAXx / LMM04 Description: For sale is an optical emission spectrometer SPECTRO MAXx for professional metal and alloy analysis. This device is suitable for rapid and precise determination of the chemical composition of metals such as steel, cast iron, as well as various non-ferrous alloys. It is a proven industrial instrument used in foundries, laboratories, and for quality assurance purposes. Device and Maintenance Information: - The device was covered by a maintenance contract and has been regularly serviced by qualified personnel. - Several programs have been calibrated annually. - Last maintenance: 22.12.2023 - Operation without vacuum pump – flushing is performed exclusively with argon. Regularly Calibrated Programs: - Fe-10, Fe-15, Fe-30 - Al-10, Al-20 - Cu-20 Overview of Installed Programs: - Fe-01-M / Fe-10 – Low-alloy steel - Fe-01-M / Fe-30 – Cr / CrNi steel - Fe-15-M / Fe-15 – Free-machining steel - Al-01-M / Al-10 – Pure aluminum - Al-01-M / Al-20 – AlSi alloy - Cu-01-M / Cu-20 – CuZn alloy Technical Data: Device Data: - Device Type: Optical Emission Spectrometer (OES) - Manufacturer: SPECTRO / AMETEK - Model: SPECTRO MAXx - Construction: Benchtop unit Electrical Data: - Power supply: 115 / 230 V AC - Frequency: 50 / 60 Hz - Power consumption during measurement: approx. 400 VA - Power consumption in standby: approx. 180 VA - Fuse protection: 16 A (slow-blow) Fpodeybcfkepfx Ahmeh Gas Supply: - Operating gas: Argon (Ar) - Argon purity: min. 4.8 (99.998%) - Inlet pressure: approx. 7 bar Argon Consumption: - Standby: approx. 6 l/h - Continuous operation: approx. 23 l/h - Analysis mode: approx. 200 l/h Environmental Conditions: - Operating temperature: +10 °C to +30 °C - Humidity: 20–80%, non-condensing Dimensions & Weight: - Dimensions (W × D × H): approx. 600 × 740 × 460 mm - Weight: approx. 60 kg Important Note: The table shown in the photographs is not included in the sale. Condition: used Scope of Delivery (see pictures): - SPECTRO MAXx spectrometer - PC with monitor, keyboard, and mouse - Argon unit - Original manuals and software media Technical data subject to change and error. For further questions, we are happy to assist you by phone.

Stanje: rabljeno, 24 units available Fedpfxodc A Rps Ahmsph

Stanje: rabljeno, Technical details: Belt width: 135 mm Conveying height: 1020 mm Control voltage: 380 V Approx. machine weight: 165 kg Approx. machine dimensions (LxWxH): 3.3 x 0.5 x 1.5 m Scraper belt conveyor made of sheet steel construction Additional technical specifications: Fpedpfx Aju Nuqushmsh - Profile height (B1): 160 mm - Profile width (F): 300 mm - Chip inlet width (F1): 160 mm - Chip inlet length (A): 1700 mm - Floor clearance (I): 20 mm - Discharge length (D): 200 mm - Discharge height above floor (C): 1020 mm - Discharge width: 200 mm - Insertion/underfeed length (A): approx. 2000 mm - Insertion height (B): 180 mm Operation via hand switch Rotating scraper brushes at the discharge and laterally on the left/right of the feed bar

Leto izdelave: 2023, stanje: skoraj kot novo (rabljeno),

Stanje: rabljeno, Tehnične podrobnosti: Nosilnost mize: 3 t Premer mize: 1280 mm Miza vrtljiva: 0-180 stopinj Miza nagibna: ne / 0 stopinj Teža stroja cca.: 1.376 kg Dimenzije DxŠxV: 1,4 x 1,7 x 0,18 m Fjdpfx Aexz E Exehmoph Pozicionirna miza Preizkušena nosilnost do 3 t Trenutno 2 poziciji, 180 stopinj Vrtljiva miza se po zagonu obrne iz 0 stopinj na 180 stopinj in nazaj na 0 stopinj. Možno modificirati do najv. 270°

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Mesh box dumper, pneumatic, suitable for mesh boxes 1200 x 800 mm Dimensions: 2200 x 1700 x 2250 mm (L x W x H) Weight approx. 1500 kg Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video above among the images, on our website, or on our YouTube channel. Viewings, including under power, are possible at any time by appointment. Video calls can be arranged upon request. Fpodpfx Ahjv Nhk Dsmoh If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical specifications are based on manufacturer information. We assume no liability for the details provided or for potential errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Viewings are possible by arrangement. The sale is ex location, without warranty or guarantee. Our payment terms: 100% advance payment.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, We offer a new table-type blast machine – high-quality Czech manufacturing, using premium materials in production. Model – TSM 360-1.5 - Rotating table diameter: 1500 mm - Maximum height of blasted part: 550 mm - Overall machine height: 3000 mm Fedpfsw Nbycjx Ahmjph - Overall machine width: 2000 mm - Overall machine depth: 1600 mm - 1x blasting turbine: power – 7.5 kW with frequency converter The turbine can rotate both left and right. - Bucket elevator: power – 1.1 kW - Table rotation: power – 1.1 kW with frequency converter Table rotation can be controlled manually via push-button. - Total machine power: 9.7 kW The unit is equipped with a frequency converter – allowing speed regulation of the blasting turbine. A major advantage of this machine is the ability to change the turbine rotation direction between left and right. Blasting equipment is CE-certified. Further benefits include high blasting efficiency, quiet operation, low energy consumption, and minimum space requirements for installation. Within its category, this table blast machine is considered highly advanced due to its design. (Sandblaster, sandblasting, blasting, sandblasting machine, blast machine, blaster).

Stanje: dober (rabljeno), pribl. 14 kosov komisionirskih vozičkov s pregradami – rabljeno - : Cena na kos: 195,-€ (neto), prevzem na lokaciji! Fodjx Dk Dxspfx Ahmjph Minimalni nakup: 5 kosov! Tip 2 Proizvajalec: neznan, Tip: neznan, Leto izdelave: neznano Višina: 237 cm Dolžina: 233 cm Širina: 74 cm Stanje: dobro Na voljo: takoj Lokacija: Euskirchen

Stanje: dober (rabljeno), približno 24 kosov miznih vozičkov – rabljeni: Cena na kos na lokaciji: 69,- € (neto)! Fpodpfx Aow Db Scshmsh Minimalni nakup 3 kosi = 1 paleta Proizvajalec: neznan (bo naknadno posredovano) Tip: neznan (bo naknadno posredovano) Letnik: neznan (bo naknadno posredovano) Mere: neznane (bodo naknadno posredovane) Širina ocenjena 40–50 cm, dolžina ocenjena 0,70 m Nosilnost: neznana (bo naknadno posredovano) Stanje: dobro – zelo dobro Na voljo: takoj Lokacija: področje Rena/Maina, kasneje skladišče Frankenberg/Saška

Leto izdelave: 2006, obratovalne ure: 82.068 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 258-22, Travelling column machine in steel-concrete composite structure with workpiece changing unit. Low-maintenance model from the globally renowned manufacturer CHIRON. Double spindle - vertical - machining center including KNOLL AE 1058.009 chip conveyor and a (now dismantled) composite system. Prescribed maintenance intervals for the system and its components have always been observed. TECHNICAL DETAILS Drilling capacity in steel: 60: 2 x Ø 36 mm (with indexable insert drill) Guides: with long-life grease lubrication Speed range: 20-12,000 rpm CNC control: SIEMENS 840D Spindle distance on X-axis: 250 mm X-axis travel: 300 mm Y-axis travel: 400 mm Z-axis travel: 425 mm (with variable tool change level) Rapid traverse: 60 m/min on X, Y and Z axes Main spindle drive: 1 unit with 2 AC motors Power at 100% duty cycle: 9.5 kW Power at 15% duty cycle: 14.0 kW Drive: digital direct drives with indirect absolute position measuring system (no reference point approach required) Tool positions: 212 Tool diameter: max. 65 mm Tool diameter with free adjacent pockets: max. 175 mm Tool weight: max. 2.5 kg (5.0 kg at 2 pockets) Tool change time: approx. 0.9 s (controller-dependent) Chip-to-chip time: approx. 2.1 s (controller-dependent) Workpiece changer: 0 / 180° Tool holder: HSK A 63 1 MACHINE DETAILS Power supply: 3 / N / PE - 50/60 Hz Operating voltage: 400 V Power consumption: 44 kVA Rated current: 63 A Coolant unit HL 450 / 900 CHIP CONVEYOR Manufacturer: KNOLL Type: AE 1058.009 Year of manufacture: 2006 EQUIPMENT - CHIRON maintenance manual displayed on screen - Operating hours and piece counter - 230 V socket outlet - Socket for portable mini-handwheel - Control cabinet cooler mounted to door - Signal light - Splash guard enclosure - Chip conveyor - Mini operator panel - Rinsing gun - Central pneumatic connection - Fixture flushing system - 70 bar high-pressure pump - 1 internal cooling package with extraction unit - Fully enclosed working area - Extraction unit with air cleaner - Extraction capacity 800 m³/h - CHIRON tool life monitoring with: - Automatic loading door for splash guard enclosure - “Open” and “Close” operation, activated by two-hand control Fedpsmt A Ivsfx Ahmsph - Integrated workpiece changing device IWW 0/180° - Chiron Lasercontrol Single F500 - Ethernet connection RJ45 on control cabinet instead of operator panel - Pneumatic and hydraulic connections - Central hydraulic and pneumatic manifold prepared for up to 20 connections, 6 fitted including couplings: 4 hydraulic (max. 210 bar) and 2 for non-actuated pneumatics - 4 additional hydraulic ports - Hydraulic power unit - 2 hydraulic unit expansions for further clamping circuits

Stanje: dober (rabljeno), Approx. 8 platform trolleys – used –: Fpedsw Dbw Sjpfx Ahmsh Price for purchase of the entire lot ex location: €350 (net) Manufacturer: unknown (to be provided) Model: unknown (to be provided) Year of manufacture: unknown (to be provided) Dimensions: unknown (to be provided) Estimated width: 40 cm, estimated length: 1 m Load capacity: unknown (to be provided) Condition: good – very good Available: immediately Location: Rhine / Main area, later warehouse in Frankenberg / Saxony

Stanje: dober (rabljeno), Approx. 117 stackable racks, post racks, 2 types – used – : Price (net), ex location – only bulk purchase per type! Fedpfxstq Htre Ahmsph Type 1: €125.- Type 2: €125.- Manufacturer: unknown Year of manufacture: unknown Type 1 – 75 units – Stackable racks with wooden base, Green Dimensions: W=1940 mm / D=1200 mm Type 2 – 42 units – Stackable racks with wooden base, Grey W=2400 mm / D=1200 mm Condition: good Available: immediately Location: 77933 Lahr

Stanje: dober (rabljeno), Approx. 2,000 units, Euro stacking containers measuring 1,190 x 610 x 420 mm – used – : Fpsdpfjr Eirpjx Ahmjh Price per unit ex location: only €15.00 (net, ex-works)! Bulk purchase price: only €12.50 (net, ex-works) each! 1 truckload = 220–264 units! Manufacturer: unknown Year of manufacture: unknown External dimensions (L x W x H): 1,190 x 610 x 420 mm Internal dimensions (L x W x H): 1,150 x 555 x 390 mm Material: polypropylene Weight per container: 10.8 kg Colour: grey Approx. 432 crates fit per lorry Condition: good Available: from April 2024 Location: Emden, later warehouse Frankenberg