Valjčni transporter z zamaškom

unbekannt Typ 600/150

Stanje: dober (rabljeno), Leto izdelave: 1978, maks. debelina medeninaste pločevine: 3 mm, Motorized Folding Bending Machine Make: Lotze Model: HZ – 2500 x 3mm Year of manufacture: 1978 Technical Data Manufacturer: Lotze Hsderc E S Ejpfx Af Teng Model: HZ-25 Year: 1978 Usable length: 2500 mm Sheet thickness: max. 3 mm Equipment - Bending angle adjustment via potentiometer - Tool package including sharp rail, bending rails, reinforcement rails - Manually adjustable back gauge All information without guarantee

Stanje: dober (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 21100122-F, Offer 25108 Technical Data: - Saw blade dimensions: 350 x 3.4 x 32 mm - Saw blade speed: 3400 rpm - Cutting capacity at 90° round: 120 mm - or flat: 105 x 105 mm - or: 180 x 70 mm - at 45° round: 110 mm - flat: 135 x 60 mm - Miter adjustment left and right: 45° - Saw head tilt adjustment for compound cuts to the left - Pneumatic vices - Discharge roller conveyor with length stop: 2000 mm - Feed roller conveyor: 3000 mm - Drive: 400 V / 2.2 kW - Space requirement approx.: W 600 x H 1730 x D 1200 mm Hodpfx Aswq N Swef Tong - Weight approx.: 180 kg

Leto izdelave: 2011, Stanje: skoraj kot novo (rabljeno), For sale is 1 roller conveyor, each including a geared motor: Technical Data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Hnedpfxsihpn Ne Af Teg Load capacity: Up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (further specifications see nameplate in the image) Three of the four roller tracks have a wooden sidewall along the entire length, and one roller track has a side wooden wall with a length of 5.20 m. Two of the four roller tracks are equipped with 3 lateral removal systems each. (see pictures)

Stanje: novo, Leto izdelave: 2024, SINGLE-BLADE TRIMMER useful cutting length from 4.2 to 8.2 m Hodsfw Nv Rjpfx Af Tsng maximum cutting thickness 160 mm parallel guide sawdust hopper

Stanje: rabljeno, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Hsdpfx Afjdzqblo Tsng Seaming machine for pre-bending sheet metal seams For producing a folded edge Edge folding machine for thin sheet metal as an alternative to press brakes Serial No. 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via knurled threaded screws Space requirement (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is the doubling of the sheet metal at the edge, i.e. folded once to increase the rigidity of the sheet. Folding creates a rounded edge, which reduces the risk of injury from sharp sheet edges. Ideal for processing sheet metal for furniture manufacturing, cladding panels, or for HVAC and silencer production.

Stanje: dober (rabljeno), Leto izdelave: 2004, I am selling a 3-axis CNC machining center HOLZ-HER UNI-MASTER 7226 with gantry table, year of manufacture 2004. Configuration: - 3-axis main spindle, freshly fully overhauled, water-cooled - Tool magazine with 6 HSK63 positions mounted on the head - 1x grooving saw in X-direction - Drilling head with 16+4 drill spindles - Usable working area: 3100 x 1360 mm - 2 working areas, 4 clamping zones - Automatic central lubrication system - Holzher software with operating manual - Vacuum pump SIEMENS ELMO-L S22 2.35 kW - Additional vacuum for template work or optional clamping devices Hjdpfxoi U Dxuo Af Tong Good condition. Immediately available from stock.

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Saw blade diameter: 750 mm, saw blade speed: 2200 rpm, table dimensions: 1500 x 1500 x 900 mm, cutting height 90°/45°/30°: 295/200/137 mm, motor power: 16 kW, length: 1800 mm, width: 1500 mm, height: 1100 mm, weight: 650 kg. An inspection on site is possible. Hedpjurwy Aefx Af Tjng

Leto izdelave: 1998, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Very sturdy roller conveyor with hydraulic lift and lower cross conveyor. Hedpot Hg Huefx Af Tong Section 1: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Construction height 1,000 mm. Integrated hydraulic lift and lower cross conveyor with 4 chain strands. Spacings: 1,500 - 1,300 - 1,000 mm. Completely sheet metal covered. Hydraulic supporting idler rollers. Driven by a geared motor. New bearings. Section 2: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lift and lower cross conveyor with 6 chain strands. Cantilevered design allows workpieces to be transferred under the roller conveyor to the left or right. Completely sheet metal covered. Including hydraulic power unit for both roller conveyors.

Leto izdelave: 1992, Stanje: dober (rabljeno), številka stroja/vozila: 10-166, OFFER 13467 Technical Data: - Max. material thickness at 40 kg/mm² tensile strength approx.: 3 mm - Shaft diameter: 45 mm - Manual hydraulic adjustment of the upper roller - Electric foot switch - Drive: 400 V / 1.1 kW Hnjdpfx Afohrm Iuj Tsg - Space requirement approx.: W 550 x H 1200 x D 1200 mm - Weight approx.: 180 kg

Stanje: dober (rabljeno), Leto izdelave: 1980, številka stroja/vozila: 27-3, Offer 23317 Technical Data: - Max. working width: 2040 mm - Max. material thickness at 40 kp / mm² strength: 3.5 mm - Bending angle adjustment, electronically pre-selectable: 0 to 135° - Smallest bending radius: 1.25 x sheet thickness - Minimum internal flange height: 6 x sheet thickness - Automatic sequence control for a complete work cycle - Operation via hand or foot switch - Maximum opening width / stroke of upper beam: 200 mm - Height adjustment: Hedorklfrjpfx Af Tjng - of the bending beam: 80 mm - of the lower beam: 80 mm - Upper beam drive: 400 V / 1.1 kW - Bending beam drive: 400 V / 1.5 kW - Manual backgauge, accessible from the front - Required space (approx.): W 3300 x H 1350 x D 1500 mm - Weight (approx.): 2600 kg