Ploščo strižne

RAS 82.20

Stanje: novo, Band Saw Machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Condition: New machine Cutting Capacity (round): 300 mm Dujdpfx Aeilg Hdji Uju Blade Speed: 20-100 m/min, stepless Standard equipment includes: - Fully hydraulic, semi-automatic design. After starting, the machine clamps automatically; after finishing the cut, it returns to the starting position, stops the saw blade, and opens the vise. - Cutting sensor for automatic material height detection - Horizontal vise, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip cleaning brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: 302340, Ring bending machine Manufacturer: KB, Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Bending capacity: - Round tube up to 48 x 3.0 mm - Flat bar (upright) 50 x 10 mm - Square tube 40 x 40 x 3 mm Weight: 170 kg Dsdpfsd S Uf Sjx Ai Ujuu Motor: 0.75 kW, 400 Volt, 50 Hz, 3-phase.

Stanje: zelo dobro (rabljeno), SCM Compact XL Four-Sided Planer - Planing width: 23 cm Dusdpfjlat Hdsx Ai Uou - Planing height: 13 cm - Electrically adjustable top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle: 4 kW, right and left spindle driven by a single motor: 7.5 kW each, top spindle: 5.5 kW, universal spindle: 5.5 kW Machine in very good condition

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation. Dusdpfx Aiehpktvo Uju

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.000 mm, moč: 13 kW (17,68 KM), This is a LEVIBRETON ONE surface grinding machine. The machine is equipped with a oscillating head as well as a 750 mm diameter grinding plate. With this machine, the surfaces of both hard stones and soft stones (marble) can be polished, satin-finished, or bush-hammered using the appropriate tooling. Dsdpfx Ajrpi E Asi Usuu

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Dedpeg U Uv Rsfx Ai Usuu Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces Dsdpfx Aishlp D Nj Usuu - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: novo, Sheet thickness: 1.6 mm Pressing force: 4 t Blade length: 156 mm Adjustable angle: fixed, from – to degrees Table area: 450 mm x 305 mm Total power requirement: manual operation (kW) Machine weight: approx. 95 kg Dimensions (LxWxH): 530 x 380 x 480 mm Duedeftd Uaepfx Ai Ueu

Stanje: dober (rabljeno), potovalna razdalja osi X: 745 mm, pomik osi Y: 370 mm, pomik po osi Z: 300 mm, Bridgeport milling machine Model: Interact 4 Control: Heidenhain TNC 155 X travel: 745 mm Y travel: 370 mm Duodpfx Aoqgcdtoi Uju Z travel: 300 mm Table: 960 x 380 mm Spindle: ISO 40 Dimensions: 185 x 180 x 235 cm (LxWxH)

Leto izdelave: 1981, stanje: dober (rabljeno), številka stroja/vozila: 3626, OFFER 21448 Technical Data: - Maximum working width: 2540 mm - Maximum cutting capacity (Steel 40): 4 mm - Motorized cutting angle adjustment - Cutting gap adjustment via scaled adjustment screws - Number of hydraulic hold-downs: 14 pcs - Motorized backgauge with positioning system: 10 – 1000 mm - Strokes per minute (depending on cutting angle and length): 23 per min Dsdshhc Ixopfx Ai Uouu - Hydraulic drive: 400 V / 7.5 kW - Table height: 1030 mm - Required floor space: approx. W 2500 x H 1630 x D 2150 mm - Weight: approx. 3600 kg Includes: - Pneumatically assisted sheet support - Front squaring arm and supporting arms - Electronic cutting depth adjustment - Cutting line illumination - Electric foot switch