Rotacijska miza

unbekannt TS 250 mm

Stanje: rabljeno, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and cross Chuck flange: short taper DIN 55022 Size 4 Cjdpfx Aortd Uwefqjhf Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert cartridge - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centring tip for collet chuck - Emergency stop - Folding chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (Steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stanje: novo, POVSEM NOV 3-OSNI OBRATOVALNI CENTER HEIDENHAIN TNC 640 digitalno vodenje poti Cjdjhy Atfopfx Afqjhf HEIDENHAIN paket (motorji, merilni sistemi in ročno kolo) X-os: 1.430 mm Y-os: 670 mm Z-os: 640 mm Dimenzija mize: 1.500 x 620 mm Nosilnost mize: 1.200 kg Hitrost vretena: 10.000 obr/min (oljno hlajeno) Vpetje vretena: SK 40-BIG PLUS (BVD 40) Maksimalna moč vretena: 32 kW IKZ – notranje dovajanje hladilne tekočine – 20 bar Hitri pomiki: 30.000 mm/min Pozicionirna natančnost: ± 0,005 mm Ponavljajoča natančnost: ± 0,003 mm Menjalnik orodij WZW: 30 mestni (opcijsko do 60 mest) Transporter ostružkov s členkasto verigo Priprava za 4. os (vrtljiva miza) Popolna ohišja Odgovorjeno bo le na povpraševanja iz Nemčije.

Stanje: novo, Leto izdelave: 2025, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor Chedpfx Afsi Dfidoqef with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Diameter 200 mm Height 105 mm Machine weight approx. 25 kg Chjdpfx Aohuxbrjfqsf Space requirement approx. 400 x 280 x 150 mm

Leto izdelave: 1972, Stanje: pripravljen za uporabo (rabljen), Table diameter: 300 mm Chedpfxed Rlifs Afqjf Height in horizontal position: 155 mm Width: 500 mm Depth: 500 mm

Stanje: novo, Diameter 200 mm Height 105/265 mm Centre height 105 mm Cedpfxoupxd Re Afqshf Machine weight approx. 41 kg Space requirements approx. 400 x 330 x 310 mm

Stanje: dober (rabljeno), Clamping Plate with T-slots, Plate Field, Welding Table, Plate Boring Mill, T-slot Plate -T-slot Plate: Clamping plate with solid base frame -Length: 3000 mm -Width: 2000 mm -Plate: with support ribs -T-slot width: 28 mm -T-slot spacing: 200 mm -Overall dimensions: 3000/2000/H800 mm Cjdpskrgiqofx Afqjhf -Weight: 4500 kg

Stanje: rabljeno, with mounted three-jaw chuck Table diameter: 200 mm Csdpfxsda I Rvo Afqjhf Bore approx.: 18 mm Construction height: 100 mm Total height with chuck: 165 mm Width: 270 mm Length: 320 mm

Stanje: rabljeno, Technical details: Swing over bed: 320 mm Turning length: 800 mm Distance between centers: 800 mm Center height: 150 mm Spindle bore: 30 mm Speed range: 35 - 1500 rpm / 16 steps Feed range X-axis: 0.04 - 2.4 m/min / 30 steps Tailstock quill stroke: 125 mm Chjdpfx Afeu Ixy Deqsf Tailstock taper: MT2 Machine dimensions approx. LxWxH: 1.7 x 0.8 x 1.5 m Equipment and additional features: - Röhm 3-jaw chuck 160 mm - Chuck guard - Safety system WxH: 510x400 mm - Multifix tool holder (4 pcs) - Centre in tailstock - Compound slide swivels +/- 45°, maximum travel = 100 mm - Cross slide travel = 300 mm feed - Pump for coolant system (without supply)

Stanje: dober (rabljeno), NHH Lathe Model: 1N611N Swing over bed: 260 mm Swing over cross slide: 160 mm Spindle bore: 26 mm Turning length: 600 mm Digital readout Chuck diameter: 155 mm Spindle speed: 2000 rpm Csdoqgdkispfx Afqehf Dimensions: 150x85x155 cm (LxWxH)