Štirikratni hitroizmenljiv jekleni nosilec

unbekannt Spannlänge 200 mm

Stanje: dober (rabljeno), Leto izdelave: 2008, 1 rabljeni vertikalni obdelovalni center Proizvajalec: Deckel Maho Tip: DMU 80 monoblock Leto izdelave: 2008 Krmiljenje: ITNC 530 Tehnične podrobnosti X-hod: 980 mm Y-hod: 630 mm Z-hod: 630 mm Krmiljenje: iTNC 530 Skupna moč: 10 / 15 kW Gjdpfx Ajxa Eudofqstt Teža stroja pribl.: 9,5 t Dimenzije pribl.: 4 x 4 x 2,5 m Dodatne informacije Oprema: Elektronsko ročno kolo Način delovanja 4 Ročna zasučna glava za rezkanje Motorsko vreteno 12.000 min-1 SK 40 / Vpenjanje DIN 69872 32-pozicijski zalogovnik orodij Fiksna miza 1250 x 700 mm Transporter ostružkov Naprava za hlajenje

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: - Error message during startup Gtedpfxjxp Hmao Afqet - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 various tool holders - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) - 1 pc 3-jaw chuck, diameter 250 mm - 1 pc 3-jaw chuck, diameter 300 mm - 1 pc 4-jaw chuck, diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Stanje: rabljeno, Leto izdelave: 2005, X-axis travel: 1,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm Control: Siemens 840 D Spindle speed range – main spindle: 20 – 18,000 rpm Drive power – main spindle: 28 / 19 kW Max. torque: 121 Nm Tool holder: HSK-A63 Swiveling B-axis: -30 / +180° Swivel time: 1.2 s Number of pallets: 2 Pallet size: 1,000 x 800 mm Max. workpiece weight: 1,500 kg Rotary C-axis: 360° Number of tool stations: 180 positions Tool holder: HSK-A63 Gtodpjwf Rgfefx Afqst Total power requirement: 78 kVA Machine weight approx.: 27.0 t Space requirements approx.: 8.0 x 7.0 x 3.4 m 5-axis CNC universal machining center DECKEL MAHO – DMC 100 U duoBLOCK - Swiveling milling head (B axis) - NC rotary table (C axis) - Pallet changer - 180-position tool magazine - WITHOUT zero-point clamping system - WITHOUT RINGLER extraction system - WITHOUT tools

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 -Drive power: 1.1 kW Gtedpjnzpx Rsfx Afqet -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Stanje: rabljeno, Leto izdelave: 2007, Število obratov 8000 min-1 Teža 5500 kg Leto izdelave 2007 Godpfx Ajwm Rqasfqett Krmiljenje Siemens 840D Mere (d/š/v) 3600 x 2800 x 2400 mm Pomik - X 1035 mm Pomik - Y 560 mm Pomik - Z 510 mm Na voljo več slik

Stanje: rabljeno, Wheel diameter – max. 180 mm Gtsdju Uu S Tjpfx Afqet Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Spindle mount internal MK 4 Table diameter 160 mm Table bore diameter 75 mm Number of strokes 355 – 630 strokes/min Feed range 0.008 – 0.4 mm/stroke Space requirement approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Year of manufacture: approx. 1970 Hydraulic clamping in table Change gears

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, x-axis travel 800 mm y-axis travel 600 mm z-axis travel 500 mm OFFER We can offer you the following ex-stock, subject to prior sale and errors excepted, without obligation: HERMLE 5-Axis Universal Machining Center in gantry design with swiveling rotary table Model C 800 U Year of manufacture 1998 12648 _____ Milling head travel longitudinal X-axis 800 mm Milling head travel transverse Y-axis 600 mm Milling head travel vertical Z-axis 500 mm NC swivel axis A-axis -20 / +90 ° NC rotary table C-axis 360,000 ° Maximum projection of vertical spindle approx. 600 mm Max. installation height under spindle approx. 100 / 600 mm Table size (swing diameter Ø 630 mm) 540 x 540 mm Max. table workpiece weight approx. 300 kg Spindle taper SK 40 Spindle speeds, infinitely variable 18,000 rpm Feeds/rapid traverse, infinitely variable 2 – 35,000 mm/min. Feed force approx. 11/16 Nm Spindle drive 15 kW Gtjdpfox Dndcex Afqot Total power consumption approx. 37 kW - 400 V - 50 Hz Weight approx. 8,000 kg Accessories / Special equipment: • Compact, modified gantry design with 3 axes in the milling head for feeds up to 35 m/min. All drives and guides positioned outside the working area. • Machine bed made from mineral cast with high damping properties, can be installed without foundation, with high static and dynamic stability. • SIEMENS 5-axis path control, Type 840 D, with graphics and all modern programming features for full 5-axis machining of complex workpieces with electronic handwheel • NC Swiveling Rotary Table (C-axis 360,000° / B-axis -20/+90°) Ø 630 mm • Robust vertical head with HERMLE milling spindle up to 18,000 rpm with automatic swiveling nozzle block • Tool changer with extended (auxiliary) magazine for up to 87 tools • Coolant system with chip conveyor, oil mist extraction with filter, complete enclosure • Extensive accessories including approx. 50 tool holders, operating manuals. Condition: Very good – machine under power and ready for demonstration A video of the machine will be available here shortly (please click on the link): C 800 U/4 Delivery: ex stock – immediate availability, FCA Metzingen Payment: strictly net – immediately upon receipt of invoice, prior to delivery of the machine

Stanje: rabljeno, Leto izdelave: 1956, številka stroja/vozila: 17179, Heavy-duty lathe, lathe, turning machine, engine lathe, geared head lathe - Manufacturer: Meuser, geared head lathe model M3A - Turning length: 1,400 mm - Swing over bed: 550 mm Godpfx Afeh Uuzyoqett - Swing in gap: 800 mm - Swing over cross slide: 300 mm - Spindle bore: Ø 58 mm - Spindle speeds: 15 - 810 rpm - 3-jaw chuck: Röhm Ø 250 mm - Faceplate: 500 mm - Accessories: incl. tool holder/tools, see photos - Tailstock taper: MK5 - Dimensions: 2770 x 1070 x H1310 mm

Stanje: dober (rabljeno), Leto izdelave: 2008, V dobrem tehničnem stanju in popolnoma delujoč. Leto izdelave: 2008. Dodatna Y-os: +-60 mm Največja hitrost vretena: 3.000 min-1 Moč vretenskega motorja: 22/18,5 kW Največja hitrost pogonskih orodij: 6.000 min-1 Gtedpfxoxdcigs Afqet - Vpenjalna glava 300 mm s prehodom 90 mm, vretenjak A2-8 - Povečana moč in navor 25/30 kW, 1.000/1.300 Nm - Premer struženja 420-500 mm - Dolžina struženja 1.250 mm - C-os, pogonska orodja - NC-konjiček, popolnoma programirljiv, ločen motor - Povečana moč Z-osi - Nov transporter za odrezke

Stanje: dober (rabljeno), Leto izdelave: 2005, potovalna razdalja osi X: 780 mm, pomik osi Y: 560 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: Mill Plus, dolžina mize: 700 mm, največja hitrost vretena: 12.000 obr/min, 60 tool stations. 2-fold pallet changer. IKZ – spindle with 12,000 rpm, 40 bar Operating mode 4 for machining with the door open. Blum laser for tool measurement and tool breakage control. Preparation for Blum 3D probe. Probe not included in the scope of delivery. Gtodpfsu S A Anox Afqot