Razpršilni žerjavni nosilec

unbekannt 7220/920/H1015 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 580 mm, pomik osi Y: 80 mm, pomik po osi Z: 935 mm, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP-P200L, število osi: 5, This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turning-milling center with a bed overhang of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, tool changer, and a tool magazine for 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking for a high-quality turning machine, you should consider the Okuma Multus B300-W we have for sale. Contact us for more information. • ATC / tool magazine: 40 positions • Tool changer • Maximum distance between chucks: 900 mm • Maximum turning diameter: 450 mm • Sub spindle: A2-6 nose; 38–5000 rpm • Indexing: C-axis 0.001°; B-axis 0.001° Additional equipment • Bar loader IF • Approximately 60 HSK 63 tool holders • Half a pallet of soft and hardened chuck jaws Tsdpfxjx D Rvho Aiqoc • 3 spindle stops (various lengths) • Various collets

Stanje: rabljeno, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL type AZP Curtainsider low-loader, low-loader trailer, low-loader for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Curb weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Load height under the curtain frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear swing doors at sideboard height - Curtain frame with EDSCHA roof system - Curtain frame easy to dismantle (usable even with the curtain frame removed and the curtain moved forward) - Spare wheel mounted on the front wall Tedpst N Antsfx Aiqoc - Separate raising and lowering of front and rear axles - Middle axle as lift axle - Drawbar – extendable in several stages - Very sturdy lashing rings on the outer frame and in the centre of the vehicle - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The vehicle was purchased as a new vehicle by us, i.e. from first ownership. The trailer has been deregistered since 2025.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 800 kg, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 256 mm, GF AGIECHARMILLES CUT 3000X Year of manufacture: 2021 Travel distances: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Tjdpfoych Rzsx Aiqsc Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged cutting machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER hand-held pendant for convenient setup Incl. AGIESETUP 3D Incl. automatic wire changer AWC (allows use of 2 wire spools) Incl. Conic-Plus option Incl. Fast-Threading option Incl. Smart-Threading option VISION 5 control AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is completely cleaned, overhauled, and thoroughly tested after order placement. A laser measurement of the axes is performed in our facility. We are happy to perform a custom test on the CUT 3000 for you. Incl. user training at Techma on your overhauled machine Optionally, we are happy to offer: - Transport - Commissioning - Chiller unit - Clamping devices - Consumables

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Trenutno se izvaja obnova stroja v vrednosti 90.000 €, Maho DMF 260 -7 / obdelovalni center s 5 osemi, Letnik izdelave 2016, Nadzorni sistem Heidenhain ITNC 530, Hod osi X/Y/Z 2600/700/700 mm, Tjdpszxfz Iefx Aiqjc Stacionarna miza z integrirano NC rotacijsko mizo, Os B v glavi za rezanje, brezstopenjska, Hitrost vretena do 14.000 vrt/min, Vpenjalna glava HSK A63, Količina hlajevalne tekočine 60-kratna, IKZ 40 bar, Filtrirni sistem s papirnatimi trakovi, 3D merilna sonda Heidenhain TS 649, 3D sistem za hitro nastavitev, Nadzorni sistem za zaščito stroja, Električno ročno kolo, 3D podatkovni model.

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Base machine CTX 200E with driven tools, C-axis, and 1x backworking. Includes DATAPILOT software package TurnPlus, cooling unit for control cabinet, hinged belt chip conveyor with discharge height: 1100mm including coolant tank, toolholder set for universal disk turret with holders for external machining, boring bar holder, tools with cylindrical shank mount, closure plugs, reduction sleeves. Bar gripper, complete axial, workpiece pickup device, 3x axial tool spindles for drilling/milling/tapping, 1x radial for drilling/milling/tapping, 1x for saw blades. Complete collet chuck for main spindle, complete collet chuck for sub-spindle, 17x DIN collets 173E round Ø 3-40mm, 2x DIN collets 173E hex SW 7 and 12mm, 2x DIN collets 173E square SW 8mm. Bar feeder magazine IEMCA BOSS 542/32, guide channel set LW 13, extra for IEMCA BOSS 542, 13x guide jaws for bar feeder magazine IEMCA BOSS 542/32, Ø 8-41mm. With complete documentation. The machine has been idle for one year as the turret head is missing, no other known defects, operational hours unknown, no maintenance records. Comes with bar feeder and numerous tools. Tjdpfx Asw Tl Ifoiqec

Stanje: dober (rabljeno), Sturdy crane system, ideal for glass storage or workshops, Load capacity: 3 t, Length: 14,250 mm, Width: 8,500 mm, Todpfx Aieryv S Aeqsc Height: 3,650 mm Maximum hook height: 3,280 mm, Maximum overall height: 3,950 mm.

Leto izdelave: 1979, stanje: rabljeno, Pressure: 160 t Upright distance: 850 mm Stroke: 400 mm Ram area: 800x700 mm Ejector stroke: 300 mm Ejector force: 20 t Table area: 800x700 mm Total power requirement: kW Machine weight approx. 12 t Space requirements approx. 1800x1800x4200 mm Sick BWS for protection and automatic/semi-automatic modes Blow-off function Ejector Mechanical fixed stop Stroke/pressure cut-off Tsdpfjlp Uz Rjx Aiqoc Pressure holding time Approved for manual loading operations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, CNC stružnica Okuma LB 3000 EX II Krmilnik: OSP-P300LA Leto izdelave: 2018 Interna številka stroja: 19 Stružna dolžina: 500 mm Stružni premer: 340 mm Premični premer nad ležiščem: 530 mm Število vrtljajev: 45 – 5.000 vrt/min Revolver za orodje: 12 mest (pogona) Vpenjanje orodja: BMT 65 Premer vretena: Ø 72 mm Oprema: Transporter za ostružke Lovilec delov Touchsetter Todjylhmujpfx Aiqjc Programabilna kontra vretena One Touch IGF Kitagawa 3-čeljustni vpenjalni tulec Razna pogonska in statična orodja

Leto izdelave: 2019, obratovalne ure: 5.500 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, The system must be collected by 26.05.23 – placing a bid obligates you to dismantle and collect within the deadline. TECHNICAL DETAILS: Max. workpiece size: 1050 x 820 x 300 mm Max. workpiece weight: 1,000 kg Travel ranges: 600 x 400 mm Wire diameter: 0.1 – 0.3 mm Machine weight: 3,000 kg Tedpfek H D Hasx Aiqsc Control: Fanuc 31i-WB Installation dimensions: 2,440 x 2,680 mm Machine hours: 5,500 h

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 610 mm, pomik osi Y: 510 mm, pomik po osi Z: 610 mm, skupna višina: 2.500 mm, skupna dolžina: 2.200 mm, skupna širina: 2.400 mm, dolžina mize: 760 mm, širina mize: 510 mm, obremenitev mize: 1.000 kg, For sale is a 3-axis CNC milling machine from Hurco, model VMX 24. Technical data: - Year of manufacture: 2001 - Control unit: Winmax 4 - X axis: 610.0 mm - Y axis: 510.0 mm - Z axis: 610.0 mm - Table length: 760.0 mm Tedpfx Aiev Tcfkjqsc - Table width: 510.0 mm - Max. workpiece weight: 1000.0 kg - Length: 2200.0 mm - Width: 2400.0 mm - Height: 2500.0 mm - Weight: 4700.0 kg - Number of tool pockets: 24.0 Pull studs seen in the photos are not included in the offer. Transport and loading can be organized Europe-wide upon request for an additional charge. All prices are subject to VAT. Inspection possible by appointment. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For further information or contact options, please visit our website.