Električno jekleno dvigalo 3,2t, novo na zalogi

Abus Kransysteme GM800.3200 H-202.41.6000.4E 100.20

Stanje: zelo dobro (rabljeno), Indexing Head Walter Type UPA 125 N (28487) Direct and indirect dividing Centre height 125 mm Usable in both horizontal and vertical position Spindle taper MK 4 KKG 3 Travel spindle SPH 125 mm Mounting MK 2 Rjdpfetrnndsx Agtot Total transport weight 62 kg Indexing head 48 kg

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 4.428 h, Cena: Na zahtevo - Leto izdelave: 2003 - Dokumentacija na voljo: Da Rjdownidhepfx Agtot - CE oznaka prisotna: Da - CE certifikat na voljo: Ne - Delovne ure: 4428 - Krmiljenje: CNC - Znamka krmilnega sistema: Siemens - Moč [kW]: 37,0 - Obratovalni tlak [bar]: 4137 - Premik X-osi [mm]: 6500 - Premik Y-osi [mm]: 3300 Finančne informacije DDV: Navajena cena je brez DDV DDV/Obdavčitev po razliki: DDV je odbiten za podjetja Dostava in odkup so možni kadar koli za vse industrijske naprave Lukas van Rossum

Stanje: rabljeno, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL type AZP Curtainsider low-loader, low-loader trailer, low-loader for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Curb weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Load height under the curtain frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Rsdpot N Antjfx Agtjt Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear swing doors at sideboard height - Curtain frame with EDSCHA roof system - Curtain frame easy to dismantle (usable even with the curtain frame removed and the curtain moved forward) - Spare wheel mounted on the front wall - Separate raising and lowering of front and rear axles - Middle axle as lift axle - Drawbar – extendable in several stages - Very sturdy lashing rings on the outer frame and in the centre of the vehicle - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The vehicle was purchased as a new vehicle by us, i.e. from first ownership. The trailer has been deregistered since 2025.

Stanje: dober (rabljeno), Leto izdelave: 1999, Dvoranski žerjav, žerjav, električna vitel s jekleno vrvjo, ročni voziček, valjčni voziček, voziček žerjava, voziček mačka, tekalni voziček, voziček žerjava, voziček za progo, viseča proga-voziček, dvižni mehanizem, -Proizvajalec: Stahl, voziček žerjava z električnim vitlom za jekleno vrv -Vitel: tip AS 3016-16 2/1 Rodpfxjtlzdqs Agtst -Nosilnost: 3200 kg -Glavno dvigovanje: 8 m/min -Fino dvigovanje: 1,35 m/min -Pogon vozička: FA-C 3728 133-1 -Hitra počasnost vožnje: 5/20 m/min -Razmak valjev: 1400 mm, mere glejte slike -Hitrost bobna: 16,0 / 4,0 m/min -Količina: na voljo 1 voziček žerjava -Cena: na kos -Transportne mere: 1670/1200/V470 mm -Teža: 462 kg/kos.

Leto izdelave: 1999, stanje: rabljeno, TRAGFÄHIGKEIT 2000 kg HUBHÖHE 4,7 m & 5 m ARMLÄNGE 3,2 m 2 STÜCK Redpfowa I A Tex Agtot

Leto izdelave: 2018, stanje: skoraj kot novo (rabljeno), Dumeta hydraulic height-adjustable welding positioner 500 kg load capacity, height-adjustable welding positioner with through-hole 100 - 200 mm Table diameter: 700 mm Rodpohua Dqsfx Agtst Horizontal height: min. 0.6 m, max. 1.2 m Tilted height: min. 0.40 m, max. 1.0 m Rotation speed: 0.11 - 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Leto izdelave: 2009, stanje: dober (rabljeno), številka stroja/vozila: 120P1109, OFFER 21407 Rjdpfx Aohcnhmegtjt Motorized Vessel/Drum Rotator with Rail-Mounted Carriage Technical Specifications: - Total load capacity (powered + idler unit): 40,000 kg - Load capacity per vessel rotator: 20,000 kg - Workpiece diameter approx.: 500 – 3,500 mm - Support roller center distance adjustable via trapezoidal-thread spindle - Roller diameter: 500 mm - Roller width: 150 mm - Powered unit with dual-side drive - Infinitely variable rotation speed - Handheld remote for forward and reverse operation - Drive: 400 V - Both units mounted on rail carriages - Required space for powered unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Required space for idler unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight powered unit: approx. 2,500 kg - Weight idler unit: approx. 1,800 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,5 kW (25,15 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, kapaciteta rezervoarja za gorivo: 50 l, barva: rdeča, skupna masa: 2.600 kg, lastna masa: 2.500 kg, dvižna moč: 1.000 kg/m, dvižna višina: 3.310 mm, stanje pnevmatik: 100 odstotek, konfiguracija osi: 2 osi, število sedežev: 1, prostornina žlice: 0,4 m³, širina izkopne žlice: 160 mm, Leto izdelave: 2025, nosilnost: 980 kg, Oprema: dodatne luči, hidravlika, kabina, nastavljiva roka, pogon na vsa štiri kolesa, spojka prikolice, standardna žlica, vilice za palete, zapora diferenciala, zaščita za glavo, The H&R 2210-T telescopic loader with the new 3-cylinder Perkins turbo engine (18.5 kW, Mannheim, Germany) meets the Euro 5 emissions standard, even without a particulate filter. The new turbo engine is particularly fuel efficient, and with its 2-stage hydrostatic drive, it achieves a speed of approx. 16 km/h. Thanks to the large steering angle of 42° and a tight turning radius, it is highly maneuverable even in the smallest spaces. The 2210T wheel loader with telescopic arm comes standard with a quick coupler, pallet forks, and a standard bucket, allowing you to begin work immediately. With the additional hydraulic control circuit, various attachments for the yard loader can be used. The telescopic arm provides the 2210-T with excellent reach. The electric gear function on the joystick makes operating the H&R 2210T especially comfortable. H&R loaders are technically and visually optimized in-house and undergo comprehensive inspection and testing. In addition, every machine receives extensive corrosion protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. For our machines, a TÜV Süd technical report is available for obtaining an individual road operation permit in accordance with §21 StVZO (road registration / operating permit as a self-propelled work machine). Redpfoul Af Dex Agtot Advantages of the H&R 2210T Telehandler: • Fully equipped • Efficient German-made engine (Euro 5) • Extensively optimized in-house • Extendable telescopic arm • Heated comfort cab • Includes pallet fork • Includes standard bucket (150 cm) • Joystick with float position and electric gear • Additional hydraulics for front attachments • Hydraulic oil cooler • Brake inching pedal • Reversing camera with display • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5 -15 • Radio with MP3 and USB • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch • 1-year spare parts warranty • CE compliant according to the EU Machinery Directive Price: Net: €24,975.00 VAT: €4,745.25 Gross: €29,720.25 Financing available! Options: 2-year warranty: €590 TÜV road registration / operating permit (work machine): €595 Transport within Germany & Austria upon request Technical Data: Engine: 3-cylinder Perkins turbo Power: 25 HP Emission class: Euro 5 Lifting capacity: 980 kg Lifting height: 3,310 mm (lower edge, standard pallet fork) Dumping height: 2,796 mm (lower edge, standard bucket tipped) Lift/lowering time: 4.0 / 3.5 seconds Wheelbase: 1.6 m Dimensions (L x W x H): 3,710 x 1,496 x 2,340 mm Weight: 2,430 kg Tires: 31 x 15.5 -15 Accessories and spare parts are available from us. Please include your phone number with inquiries!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Container Rotator with 10 Ton Load Capacity Rodpfx Aod Nmx Tsgtst - Infinitely variable speed control - Hand and foot remote control - Suitable for diameters from 320 mm to 2,800 mm - Roller diameter: 300 mm - Speed: 6 - 60 m/h - Power: 2 x 0.55 kW

Stanje: novo, Load capacity: 5.0 t Workpiece diameter: 100 – 2500 mm Total power requirement: 2 x 0.37 kW Max. payload drive unit: 2500 kg Max. payload idler unit: 2500 kg Rsdpfx Agjgvwgcstjt Table rotation speed: 100 – 1000 mm/min Wheel diameter: 250 x 140 mm Machine weight: approx. 0.9 t Includes double foot pedal (Start-Stop/Left-Right) Includes remote control (wired)