Transportni trak Povezovalni trak Iz nerjavečega jekla

unbekannt 150 x 11500 mm

Stanje: rabljeno, Leto izdelave: 2001, Širina udarne stene: 4000 mm Višina udarne stene: 1000 mm Zunanje dimenzije: 4600 x 1500 mm 2 x 1,5 kW motorja Skupni nazivni volumenski pretok: 7000 m³/h Odsesovalni priključki levo in desno s premerom 300 mm Lokacija skladišča: Garbsen Nledovvizkjpfx Alisd

Stanje: skoraj kot novo (rabljeno), Manufacturer: Flender Nedog Stz Aopfx Alijld Model: K2S-2,5 Backstop: Yes Power: 78 kW Gear Ratio: 44.16:1 Input/Output Speed: 1,400 / 31.7 rpm Input Shaft Diameter: 65 mm Output Shaft Diameter: 140 mm

Stanje: dober (rabljeno), Leto izdelave: 2006, Drum chipper, high-speed model with horizontal feed Nlodpfx Alju Rl Rueiod Maximum infeed width: 450 mm Maximum infeed height: 140 mm Motor: 75 kW Equipped with frequency converter for variable speed control Vibrating chute not included

Leto izdelave: 2022, stanje: novo, 1 x Niro-Tech dvostruki sustav dvostruko-osovinski lopatasti mikser. Model – RX-400. Kapacitet – 400 litara. Maksimalni unos proizvoda – 320 kg. Instalirana snaga – 3 kW. Nlsdpjhq Rgpofx Alijd Elektrika – 400 V, 50 Hz, 3 faze. Ručni ulazni ventil s magnetskim senzorom. Izrađeno od nehrđajućeg čelika AISI 304. Potpuno novo, izrada po narudžbi. Isporučuje se s 12-mjesečnim jamstvom. Molimo predvidite rok isporuke do 6 tjedana za proizvodnju ovog stroja.

Stanje: dober (rabljeno), Leto izdelave: 2001, - Manufacturer: IDE - Model: 45/4 - Year of manufacture: 2001 - Single-screw extruder Ø45mm 25 L/D - Analog control on the right - Screw profile: PVC - 4 heating zones on the barrel - 4 heating zones for tooling - Motor power: 8.5 kW - Throughput up to 60 kg/h Nlsdpfx Alouhpiysied Good overall condition, very clean machine

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, skupna masa: 8.200 kg, vrsta goriva: električni, barva: bela, Type HX426 Blade diameter (mm): 650 Number of hammers (pcs): 30 Nljdpeqmi Irjfx Alijd Feeding inlet size (mm): 1250 x 250 Screen mesh size (mm): 80 Chip length (mm): 50–80 Capacity (t/h): 8–10 Main motor power (kW): 132 Feeding conveyor motor (kW): 7.5 + 5.5 Discharge conveyor motor (kW): 5.5 + 5.5 Hydraulic pump motor (kW): 1.5 Conveyor length (mm): 4000 Discharge conveyor length (mm): 10000 Weight (t): 8.2 Note: Capacity depends on the physical properties of the input material, feeding method, feeding speed, and production size.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Einwellenzerkleinerer von Weima Modell: WL6S Nljdpfx Aloivptteisd Hauptantrieb: 22 kW

Leto izdelave: 2025, stanje: novo, Description: - Screening deck system consisting of 1 deck for screening waste wood or wood chips - Input material: 0–200 mm Nsdpfx Alog I Uqfoijld - Throughput: approx. 80 m³/h (depending on material) - Material separation into 2 fractions: 0–25 mm and oversize - To be mounted on customer’s own impact walls or substructure Technical Data: - Screening deck 1: Length = 5,200 mm; Width = 1,215 mm - External dimensions: Length = 5,500 mm; Width = 1,850 mm - Screening area: 6.3 m²; Number of shafts: 40 - Drive: 2 x 7.5 kW gear motors - Screen body: Polyurethane (star screen) D 166 / 12 fingers - Screen shafts as plug-in system (easy and cost-effective adaptation to other grain sizes possible) - Bearing lubrication routed externally, optional central lubrication available at extra cost

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Fully automatic finger jointing line: Type Doppel-Pack with automatic infeed with multi-blade cross-cut saw with stacking unit Specification: Wood infeed length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Outfeed wood length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger joint execution vertical and horizontal Glue type: PVAC white glue, double-sided glue application Electrical data: Connection voltage: 400 V Control voltage: 24 V 50 Hz Plant completely wired up to the control cabinet. Finger length / possible wood cross-section and glue type can still be adapted Nlsdpfx Aljg D Ugksiod Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Table width: 600 mm Glue application: double-sided application

Stanje: dober (rabljeno), Leto izdelave: 1998, zmogljiv sekalnik z 1,2 m širino rotorja; velik premer rotorja 368 mm s 64 noži; 37 kW motor; motor in menjalnik obnovljena pred 6 leti Nlodsxwwvujpfx Alijd