Kompaund linija z dvojnim vijačnim ekstruderjem

Twin screw extruder with hot and cold PB-65 twin screw extruder

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system Fjdpjiyyf Iofx Abvofw TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, - Single-screw extruder - 25/25 L/D screw - Motor: 2.2 kW - Slot die adapted 1.0 x 120 mm Fodperg Ebcjfx Abvofw - With cooling rollers (200 mm wide) - Winder / take-off unit - Control system

Stanje: dober (rabljeno), Gardner 800l trakasti mikser 800-litarski trakasti mikser, jednostruka osovina, unutrašnjost od nehrđajućeg čelika, poklopac s preklopom, ispustni kanal, trofazni motor. Fodpfx Abslcdz Hsvefw

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good Fsdpshy Tp Dsfx Abvsfw 2 x WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Ffjdohx Elfjpfx Abvsw Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Leto izdelave: 2000, stanje: rabljeno, Speed: 227 rpm, Power: 31 kW, Heating capacity: 7.8 kW, Length: 1952 mm, Width: 840 mm, Height: 1920 mm, Weight: 820 kg. Ffedpfx Aboduyyzjvew

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: HABERMEHL Anlagenbau GmbH Naslov: Hauptstr.1, 35510 Butzbach-Ebersgöns, Nemčija Tip: EH 400/1 Serijska številka: 901 Letnik: 2004 Napetost / frekvenca: 400 V / 50 Hz Nazivna moč: 3 kW CE-certifikat: Da 🛠️ Opis naprave Industrijski drobilnik oz. granulator (shredder/granulator). Značilne lastnosti na fotografijah: Sistem z rotacijskimi noži (drobilna enota) na 2-mm gredi 3 kW SEW motor z reduktorjem 8 mm sito (na situ označeno: „8 mm Sieb“) – določa velikost izhodnih delcev Premična, transportna konstrukcija Posoda za izpust materiala in spodnja motorizacija Fjdpfx Ajw Niuhjbvefw Takšni stroji se običajno uporabljajo za drobljenje naslednjih materialov: Plastika Guma Les Lahki kovinski ostružki Elektronski odpadki 📝 Tehnične informacije, ki jih lahko zahtevate Za dodatne informacije se lahko pri dobavitelju ali proizvajalcu pozanimate za naslednje podrobnosti:

Leto izdelave: 2023, stanje: skoraj kot novo (rabljeno), Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [min-1]: 10–192 Screw: nitrided Torque: 55 Nm Drive: Three-phase motor with frequency converter Drive power [kW]: 1.1 kW Barrel material: nitrided Electrical connection ratings: 3 / N / PE Fjdpfxoq R Tkws Abvofw Supply voltage [V]: 400 V at 50 Hz Control voltage [V]: 24 V Ceramic heating bands [W]: 1200 W Number of heating bands: 3 Max. throughput: approx. 5 kg/h Max. processing temperature [°C]: 300

Stanje: rabljeno, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel distances: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel rotary table: 400 x 290 mm, centering bore 30H6 Table load capacity: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input increment: 0.01 mm Total power requirement: 15 kVA Spindle speed range: 20 - 6,300 rpm Spindle drive power: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Retaining bolts: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Electrical connection: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3 axes controlled (X, Y, and Z axes) - Manual swivel rotary table, C-axis = table rotation 360°, B-axis = swivel range +105° / -15° - Direct position measurement system for all 5 axes - Electronic handwheel - Spindle drive via servomotor with toothed belt and 2 transmission stages - Fully enclosed safety cabin with sliding door - Swiveling control panel - Coolant nozzles on vertical head Ffedpfovt D D Uex Abvjw - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Space requirements L x W x H 2000 x 2000 x 2100 mm Weight 1750 kg Good condition

Stanje: zelo dobro (rabljeno), Volumetric K-Tron dosing unit with agitator and screw - Suitable for powder and granulate - Screw diameter: 35 mm Fjdpfervxn Isx Abvofw