Avtomatski stružnica

TSUGAMI BO 12

Stanje: dober (rabljeno), Leto izdelave: 1998, Teile, die per Hand angezeigt werden, sind nicht im Lieferumfang enthalten. Technische Daten sind auf dem Bild ersichtlich. Gedpfx Aswb Aqnegyobi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Z-axis Stroke: 205 mm Rapid Traverse: 40 m/min Measuring System Resolution Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper interface Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Draw Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth Workpiece: 180 mm Max. Speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-axis Number of Stations: 8 Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tools for Upper Tool Turret Number of Driven Stations: Max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tools for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tools for Rear Unit Number of Stations: 7 Number of Drivable Stations: Max. 3 Station Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not exhaustive): Traub CNC Lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire suppression system Chip conveyor Gbodpfxewg Takj Agyji Bar loader Operating documentation Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness or timeliness of the information provided.

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Gbsdpfxsv Scrhj Agyoi

Stanje: rabljeno, Leto izdelave: 1988, Technical details: Pressing force: 10 t Maximum workpiece diameter: 40 mm Thread length: 70–80 mm Workpiece diameter min/max: 3 / 40 mm Rotational speed: 47–94 rpm Feed rate: 0.5 – 6 mm/s Stroke: max. 7 mm Godpfew D Aq Tex Agyobi Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions (W x D x H): 1.4 x 1.4 x 1.7 m Hydraulics dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Maximum thread diameter: 40 mm; Minimum thread diameter: 3 mm Up to max. pitch: 3.5 mm; Max. pitch: 1.75 mm Roll width min.: 80 mm; max.: 120 mm Spindle speed: 47–94 rpm Roller spindle diameter: 40 mm Various rollers as accessories

Stanje: rabljeno, STAR SW 20 je CNC dolgostružni avtomat z visoko natančnostjo, veliko točnostjo in zanesljivostjo. Zmogljivosti: 11 osi, 2 vretena, maks. premer obdelave 20 mm, protivreteno do 10.000 vrt/min. Tehnični podatki: vreteno 3,7 kW, gnana orodja 1,2 kW (8.000 vrt/min), sani 7 in 5 pozicij, protioobdelava 8 orodij (6 gnanih), hitri pomik 35 m/min, priklop 50 Hz 3x380 V, masa ~3400 kg, mere D2600׊1150×V1765 mm. Oprema: podajalnik palic, svetilka, hladilna enota 150 l, izsesovalnik oljne megle ELBARON, vmesnik za podajalnik palic. Dosega ozke tolerance; področja: avtomobilska industrija, urarstvo, orodjarstvo, letalstvo, medicinska tehnika. Godpfjx S N Syex Agysbi

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 32.870 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6030578, premer struženja: 32 mm, največja hitrost vretena: 8.000 obr/min, Premer palice (maks.): 32 mm, We offer for sale a Traub TNL26K CNC automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Counter spindle: 6.7/10.7 kW; 8000 rpm Gedpfx Asvldx Asgyobi Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine comes with a large number of stationary and driven tool holders – please see the attached photo for a complete list.

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Dear Sir or Madam, We offer you a TRAUB TNL 26 CNC Swiss-type automatic lathe, year of manufacture 2004. The machine is in well-maintained, fully functional condition. Important note: This model comes equipped with only one turret. While the TNL 26 was also built in versions with two turrets, this is explicitly the version with a single turret. Technical data (summary) Manufacturer: Traub Model: TNL 26 Year of manufacture: 2004 Control: Traub TX8i-S Turret: 1 unit, mounted at the bottom, 12 tool positions, driven (live tool drive) Bar capacity: 26 / 32 mm Max. main spindle speed: up to 8,000 rpm Drive power: approx. 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) Axes: X1 / Y1 / Z1, C-axis integrated in main spindle Chip conveyor: hinge belt type, discharge height approx. 950 mm Machine weight: approx. 4,000 – 4,200 kg Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Condition & Application Godpfxsxgg Rmo Agyebi The machine is immediately available and ready for operation; it is ideally suited for precise production of small and medium batch sizes in the automotive, medical, and precision engineering industries. Price & Terms Price: on request / negotiable Delivery: ex location, ex works Inspection: viewings can be arranged at any time by appointment. For further information or to arrange a viewing, please do not hesitate to contact me at any time. Best regards, Arnd Sauter GmbH Björn Sauter

Stanje: rabljeno, TEHNIČNI PODATKI - Število osi: 3 REZKALNA VRETENA - Vpenjanje orodja: BBT 30 (Big-Plus) - Moč pogona vretena: 12 [kW] - Hitrost vretena: 10.000 [vrt/min] LINEARNE OSI - Pomik osi X/Y/Z: 500/400/330 [mm] - Hitrost hitrega pomika (X/Y/Z): 54 [m/min] MENJALNIK ORODJA - Tip menjalnika: Parapluie - Število orodij v magazinu: 21 MIZA Gedpfxsxcbu Sj Agyobi - Velikost mize: 650 x 400 [mm] - Največja obremenitev mize: 300 [kg] - Razdalja od mize do nosu vretena: 250–580 [mm] ELEKTRIČNA NAPAJANJA - Napajalna napetost: 380 [V] TEŽA IN DIMENZIJE - Potrebni prostor: 1565 x 2027 [mm] - Višina stroja: 2346 [mm] - Teža stroja: 2.000 [kg] OPREMA - Krmilnik: Fanuc 31i model B5 - Sinhronizirano rezanje navojev - 3-barvna signalna svetilka - Rezervoar za hladilno sredstvo * z visokotlačno črpalko: 15 [bar] - Notranji dovod hladilne tekočine (IKZ) - Transporter za odrezke: DROITE - Merilna sonda orodja: MIDEX BKS1S

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 Gbodpfx Aeuhaw Usgyji - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turrets: 2 UPPER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 [mm] - Y travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of stations: 6 - Number of driven stations: 6 - X/Z travel: 35/79.5 [mm] FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] - X/Z travel: 415/138.5 [mm] SUB OPERATIONS - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2016, CNC dolgotokarski avtomat TRAUB TNL 32 9P S krmilnikom TX 8 i - p Leto izdelave: 2016 Vrtina vretena: 32 mm GLAVNO VRETENO Območje vrtljajev: Maks. 6400 vrt/min C os PROTIVRETENO Območje vrtljajev: Maks. 6000 vrt/min C os ZGORNJI REVOLVER ZA ORODJE: Območje vrtljajev: Maks. 12000 vrt/min 10-pozicijski revolver (vsi gnani) ZGORNJI REVOLVER ZA ORODJE: Območje vrtljajev: Maks. 12000 vrt/min 9-pozicijski revolver (vsi gnani) ENOTA NA ZADNJI STRANI Število postaj: 8 Gedpfjylnxqex Agyebi Od tega gnane: 3 (T 12, 13 in 14) Vrtljaji T12 + T14 (12000 vrt/min) Vrtljaji T13: (4000 vrt/min) Z naslednjo dodatno opremo: Popolna zaščitna kabina z notranjo razsvetljavo Različna gnana orodja Različni držala za orodja Podajalnik palic IEMCA Boss 338 - HD KSS črpalka 20 bar Transportni trak za odrezke Navodila za uporabo