Stroj za upogibanje cevi

TRUMPF-PULZER MR65R

Stanje: dober (rabljeno), Leto izdelave: 2016, BG Cam 1325 ATC, Year of manufacture: 2016, Control system: Siemens 808 D, Travel X/Y/Z: 1270/2540/150 mm, High-pressure vacuum table, Table with 4 zones, Drive: Yaskawa servo motor, Rapid traverse X/Y: 35 m/min, Rapid traverse Z: 15 m/min, Kjdeuhzyqjpfx Ahvend Resolution: 0.001 mm, Repeat accuracy: 0.01 mm, Spindle speed up to 24,000 rpm, New spindle in 2024, ER 25, 6-position tool changer, Linear guides, Tool length measurement, Vacuum pump, Extraction shoe,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.612 mm, pomik osi Y: 5.645 mm, pomik po osi Z: 1.250 mm, dolžina mize: 7.000 mm, širina mize: 2.500 mm, največja hitrost vretena: 4.500 obr/min, razdalja med stojali: 3.800 mm, Technical data • Table clamping surface: 7,000 × 2,500 mm • X-axis (longitudinal travel): 6,000 + 612 mm • Y-axis (cross travel): 4,670 + 975 mm • Z-axis (vertical travel): 1,250 mm • W-axis (vertical travel): 1,200 mm • Distance between columns: 3,800 mm • Distance table surface – spindle nose: 2,015 mm • Drive power AC motor: 60 kW • Spindle speed in 2 steps, digital spindle drive: 60 – 4,500 rpm • Feed rate in CNC mode (rapid traverse): up to 10,000 mm/min • X-axis: 20,000 mm/min • Y- and Z-axis each: 25,000 mm/min • C-axis rotary table: ±180° • 45° milling head rotation: 360° Main components of the machine • Heidenhain iTNC 530 path control with 15" monitor • Tool changer with 60 stations • Rotary table for operating multiple milling heads with automatic milling head change, consisting of collet chuck system for accommodating various milling heads, quick couplings for hydraulics, coolant, and power supply, as well as the respective electrical safety switches • Centering of the milling heads on the rotary table via Hirth face gearing (on mounting plate and respective milling head) • 2 x milling heads: straight extension milling head (direct spindle), automatic 45° milling head • Cross beam motorized travel (for positioning only) • Operator platform: 2 operator platforms with protective enclosure and integrated control panel, traveling in X-direction, each with 2 doors • Chip conveyor on both sides of the table as well as a cross conveyor Kodpfexgr Epex Ahvsnd • Longitudinal drive X-axis and cross drive Y-axis using rack and pinion and 2 servo motors (backlash-free electronically preloaded, master-slave principle) • Vertical adjustment Z-axis via ball screw spindle (Ø 80) and preloaded double nut • Zayer guide system consisting of seated or bolted, hardened steel strips • All axes equipped with INA roller recirculating shoes on every running surface • Counter-guides of all axes additionally plastic-coated for optimal damping • Anchoring and leveling elements • The machine complies with the current EC directives The information stated above is taken from the machine documentation. The seller assumes no liability for its completeness or accuracy. The decisive factor is the actual technical data and functions of the machine.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 120 h, Funkcionalnost: popolnoma funkcionalen, moč: 1.064 kW (1.446,64 KM), vrsta goriva: plin, izhodna frekvenca: 50 Hz, Jenbacher J320 GS CHP enota – cena vključuje demontažo in nakladanje na vaše vozilo. Leto izdelave: 2010 Moč: 1064 kW Kjdpfxewd Nw Ts Ahvjnd Frekvenca: 50 Hz Obratovalne ure: 120.000 (generalni servis opravljen pri 100.000), poročila na voljo. Enota je trenutno v obratovanju. Na voljo je popolna tehnična dokumentacija. Stroj v zelo dobrem stanju. Redno vzdrževano in servisirano s strani strokovnih serviserjev. Za več informacij in slike nas kontaktirajte.

Stanje: dober (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Centre height 290 mm Centre distance 1000 mm Swing diameter over bed 580 mm Swing diameter over cross slide 380 mm X travel: 295 mm Knedpfxswdvmzo Ahvjd Top slide travel: 135 mm Spindle speed: 20-2000 rpm (21 steps) Drive motor: 7.5/11 kW Spindle bore D70 mm Spindle nose: DIN55027 (size 8) Tailstock quill: MT5 Longitudinal feed range: 0.04-12 mm/rev (120 steps) Cross feed range: 0.02-6 mm/rev (120 steps) Weight approx. 2860 kg Accessories: - Steadies - Faceplate - 3-jaw chuck - Machine lamp - Rapid traverse

Stanje: dober (rabljeno), Leto izdelave: 1987, premer struženja nad prečnim suportom: 810 mm, izvrtina vretena: 130 mm, premer struženja: 1.140 mm, stružna dolžina: 7.500 mm, poteza s peresom: 300 mm, skupna dolžina: 7.500 mm, skupna širina: 2.300 mm, skupna višina: 1.650 mm, širina postelje: 600 mm, Please note: these are not original pictures. The length is only 3000 mm, not 5000 mm. 3-guideway bed construction 2-axis Heidenhain digital readout Power feed in 3 directions on all tool post slides Central lubrication Workpiece weight when flying in chuck: 2,500 kg Workpiece weight unsupported: 8,500 kg Workpiece weight supported: 10,000 kg Optional: 4-jaw chuck approx. 1,200 mm Optional: 4-jaw chuck approx. 1,500 mm Optional package with 3 fixed steady rests, for workpieces from ... to ... Turning length: 5,000 / 7,500 mm Swing diameter over bed: Ø 1,140 mm Swing diameter over cross slide: 810 mm Swing diameter in gap: Ø 1,500 mm Gap length: 2,500 mm Spindle bore: 130 mm Bed width: 600 mm Quill diameter: 130 mm Quill stroke: 300 mm Spindle taper: 6 Morse taper Motor power: 25 kW Knjdpsv S Dp Iofx Ahvsd Speed range: 9 – 900 rpm Length: 7,500 mm Width: 2,300 mm Height: 1,650 mm Weight: 12,000 kg

Stanje: rabljeno, Leto izdelave: 1997, Premer cevi: 60 mm Debelina stene: 6 mm Minimalni polmer upogibanja: 180 mm Skupna potrebna moč: 5,5 kW Teža stroja: ca. 1300 kg Dimenzije: ca. 3500 x 1250 x 1300 mm Opis: Okrogla cev, jeklo (S235): 60,0 x 6,0 mm Okrogla cev, nerjavno jeklo (S 355): 60,0 x 4,0 mm Kvadratna cev, jeklo: 50 x 50 x 4,0 mm Pravokotna cev, jeklo: 60 x 40 x 2,0 mm Maks. uporabna dolžina: 3048 mm Kedpfet I D Uxex Ahvend Hitrost upogibanja: 10°/s Vključno z orodjem (glej fotografije) Dorn ni več na voljo, ga je mogoče naknadno dokupiti.

Stanje: rabljeno, Diameter / mm Weight: 1150 kg Type / 0 Working length / mm Universal milling head, fully rotatable 360° by Huron Spindle taper: SK40 Knjdpfxsh Nn Ilj Ahvod Electric motor: Moteurs Leroy Travel distances: 500 x 700 mm Dimensions: Length: 1,550 mm Width: 1,100 mm Height: 820 mm Weight: 1,150 kg

Leto izdelave: 2012, Stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 2000mm/750mm/800mm, NC rotary table diameter: 950mm, Milling head: SK50, Milling head swivel: +/-90°, Tool stations: 48, Max. workpiece weight: 2500kg. Dimensions X/Y/Z: approx. 4000mm/3100mm/3200mm, Weight: approx. 16,000kg, Control: Heidenhain 640. Includes M & H touch probe, 40 bar internal coolant supply (IKZ), Reven workspace extraction system, Resy paper band filter, chip conveyor, chip cleaning gun, Schink wedge chuck, diameter: 630mm, with various jaws and a selection of turning and milling tools. Documentation available. On-site inspection possible. Knsdpfx Ast Ambwjhved

Leto izdelave: 2012, Stanje: dober (rabljeno), Manufacturer: Gipo AG Model: B 1370 Year of manufacture: 2012 Feed opening size: 1,320 x 680 mm Includes: - Frame - Pre-screen Knsdpfoilh Efox Ahved - Electric motors for crusher and pre-screen. Spare jaws in stock!

Leto izdelave: 1976, Stanje: Okvarjen nosilec rezervnih delov (rabljen), Manufacturer: Ahrens Year of manufacture: 1976 Model: 206 Z Technical Data: Sheet width: 1000 mm Sheet thickness: 0.7 mm Knjdeg Ul S Depfx Ahvjd Driven roll forming stations: 12 units Shaft diameter: 55 mm Drive power: 55 kW Entry width: 1100 mm Distance between frames: 650 mm Dimensions of individual components: Roller table 1: 6,000 x 1,700 x 1,700 mm Roller table 2: 6,000 x 1,700 x 1,700 mm Drive unit 1: 3,800 x 1,000 x 1,500 mm Drive unit 2: 6,300 x 1,000 x 1,500 mm Decoiler: 3,000 x 1,300 x 1,600 mm Shear: 1,700 x 650 x 1,000 mm Euro pallet: 1,200 x 800 x 1,200 mm Two trucks are required for the transport of the complete machine! Accessories / Special equipment: Uncoiler Profile shear Note: The control cabinet is missing. Therefore, the machine is not operational. The machine serves as a base frame for roof trapezoidal profiles with a high rib.