Stroj za izsekovanje

TRUMPF TC5000-1300 . Year 2003. Low working hours . 30000 Hours

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 65.839 km, moč: 360 kW (489,46 KM), vrsta goriva: dizel, konfiguracija osi: 8x2, gorivo: dizel, barva: črn, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2017, Oprema: ABS, = Additional Options and Equipment = - Electric windows - Electronic Braking System (EBS) - Speed limiter - Cabin - Air suspension - Power Take-Off (PTO) - Power Take-Off (PTO) = Further Information = General Information Year of manufacture: June 2017 Axle configuration Front axle 1: Max. axle load: 10,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Front axle 2: Max. axle load: 10,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 1: Max. axle load: 11,500 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Steered; Tyre tread left: 50%; Tyre tread right: 50% Weights Unladen weight: 27,730 kg Payload: 11,270 kg Gross vehicle weight (GVW): 39,000 kg Functional Mast: Articulated boom Crane: Yes Superstructure brand: Palfinger PK92002-SH-H CE marking: yes Condition Technical condition: very good Optical condition: very good Gjdpfjxql Uxsx Afqobg Financial Information Price: On request Further Information Please contact John de Koning or Mark de Koning for more information.

Stanje: dober (rabljeno), Leto izdelave: 2018, Manufacturer: INDUCTAFLEX Model: AL-3e Gbedpfxovd Dfte Afqeg Control: ACCURATE Touch-Screen Year of manufacture: 2018 3 servo-driven rolls Torque per roller: 3500 Nm Electrically assisted support rolls Intelligent software: - Ellipse program - U-bend shapes - Tangent control - Automatic section detector Specifications Metric / US Standard Horizontal and vertical operation Horizontal axis diameter: Ø 105 mm Number of rolls: 3 X-axis stroke: 0 - 400 mm Dimensions (approximate): Length: 4500 mm Width: 3200 mm Height: 2700 mm Weight: 3300 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual terms are made. We recommend verifying all important details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 33.000 h,

Stanje: dober (rabljeno), HYDRAULIC PRESS BRAKE BYSTRONIC, 3100X150 TON, MAX STROKE 315 mm, FAST DOWN STROKE 190 mm/s, WORKING CYCLE 10 mm/s, FAST RETURN STROKE 150 mm/s, DIMENSIONS: 415x200x290 cm (h), WEIGHT: 11,000 KG Y1 Y2: hydraulic cylinder axes. X axis: backgauge forward and backward movement. R axis: backgauge vertical movement (up and down). Z1 and Z2 axes: backgauge stops movement to the right and left. X1 or relative X: single stop forward and backward movement. 7 axes total. Gsdpovxipgefx Afqobg The control unit also manages hydraulic crowning, which can be considered the eighth axis.

Stanje: dober (rabljeno), Leto izdelave: 2000, najv. debelina jeklene pločevine: 2 mm, maks. debelina aluminijaste pločevine: 3 mm, Technical specifications: - Maximum working length: 2160 mm - Maximum sheet thickness (steel 400 N/mm²): 2.0 mm - Maximum sheet thickness (stainless steel): 1.5 mm - Maximum sheet thickness (aluminum): 3.0 mm - Maximum developed sheet width: 1500 mm - Maximum bending height on four sides: max. 203 mm - Bending blade operating range: 180 degrees - Machine width: approx. 5500 mm - Machine length: approx. 7000 mm - Machine height: 2500 mm Gjdpfsqzibtjx Afqsbg - Total weight: 21,000 kg - Power: 18 kW - Frequency: 50 Hz - Pressure: 6 bar INCLUDES drag-feed loading system

Stanje: zelo dobro (rabljeno), Engel Victory 1350/220 Tech Gjdepdrpzopfx Afqobg Clamping Force: 220 tonnes Year of Manufacture: 2004 Platen Size (W x H): 860 x 830 mm Screw Diameter: 55 mm (618 cm³) Control System: CC 200 Minimum Tool Installation Height: 250 mm Maximum: 730 mm

Stanje: zelo dobro (rabljeno), The SB-10 grinding machine enables flawless grinding of boring bars, thread-cutting tools, parting-off tools, or boring bar steels made of HSS or carbide for jig boring machines or lathes. By selecting the correct rake angle to suit the respective material, you achieve optimum utilization and a longer service life of the tools. These boring bars are still mostly ground by hand today and are subsequently used on high-quality machine tools. On the SB-10, the steels are ground using a profiled grinding wheel at the circumference. The desired profile is achieved effortlessly with a dressing diamond and the template mounted on the machine. For excellent stability and surface quality, the horizontal carriage is mounted on cross-roller guideways. Gbjdpfxofqicxe Afqeg Grinding wheel (ØxWxB): 125 x 20 x 20 mm Speed: 2800 rpm Longitudinal adjustment: 130 mm Transverse adjustment: 80 mm Height adjustment: 65 mm Rake angle: +25° to -10° Dimensions (W x D x H): approx. 550 x 450 x 650 mm Weight: approx. 70 kg

Stanje: rabljeno, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gear Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R 60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gear - 2-piece bending tool opens and closes via hydraulic lifting movement - MERKLE hydraulic round block cylinder, type 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control system - Without hydraulic power unit Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Dismantled from a fully functional special-purpose machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Max. speed = n. max.: 5,500 rpm - Brushless permanent magnet servo motor SIEMENS ----- Godpsd E A I Isfx Afqsbg 5 units in right-hand version available. 5 units in left-hand version available. The stated price refers to one bending unit with servo motor. Upon request, we also sell individual subassemblies of the bending unit. We also offer electrical components for servo motor control. Hydraulic power units are also available.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1989, premer zgornjega valja: 200 mm, premer stranskega valja: 150 mm, najv. debelina pločevine: 6 mm, delovna dolžina: 3.000 mm, Working length 3000 mm Gbodjuzm Ayepfx Afqeg Bending capacity 6 mm Pre-bending capacity 4 mm Top roll diameter 200 mm Side roll diameter 150 mm Hydraulic drop-end

Stanje: novo, Leto izdelave: 2024, pritisk: 8 letvica, Horizontal mitre adjustment 15°–90°15°, stepless Saw motor 5.50 kW (400 Volt) Saw blade Ø 600 mm Travel range rear stop 180 mm Working height 940–1000 mm, adjustable via feet 2 x extraction ports (top of hood and bottom) Net weight 600 kg WxDxH 135x140x150 cm RAL 9007 Grey Aluminium Rotary table made from ground nickel steel Saw head with recirculating ball guides, designed for high accuracy, long service life, and high rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed Chip flow directed toward extraction hood. Equipment • Precision underfloor circular saw • Mitre adjustment 0º/45º/90º/-45º/-60º, stepless • Incl. 2 pneumatic vertical clamps • Infinitely variable saw blade feed rate • Two-hand safety control • Adjustable rear material stop • Chip extraction device – chip extraction system • Mist spray unit for air-oil cooling • Air pistol with spiral hose • Incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade Ø 600 mm • Saw blade not included in delivery! Godpfegwt S Tox Afqsbg Our NC pusher system ensures your workpieces are positioned at the desired working position on our UK 600 HA 90°. A gripper clamp secures the material, and the NC control automatically positions it. Afterwards, the clamping and sawing process is activated. Positions are pre-programmed in the control system. Once the machining operation is completed by the machine, it automatically moves to the next sawing position. Depending on the workpiece, multiple parts can also be clamped and positioned simultaneously, stacked or side by side. You are welcome to inspect the desired machine at any time in our manufacturing/demo hall. Please feel free to contact us regarding this. Plantec Maschinen GmbH