Hidravlična škarjasta dvižna miza 5 ton

TREPEL - L. A. VAN EIJLE & Co.

Stanje: dober (rabljeno), Leto izdelave: 1994, 2-side planer, top and bottom constant table height (consistent infeed height) maximum planing width: 600 mm maximum planing height: 280 mm planerheads with strip knives Nwsdjhuthyjpfx Aqqeh immediately ready for operation

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,5 kW (25,15 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, kapaciteta rezervoarja za gorivo: 50 l, barva: rdeča, skupna masa: 2.600 kg, lastna masa: 2.500 kg, dvižna moč: 1.000 kg/m, dvižna višina: 3.310 mm, stanje pnevmatik: 100 odstotek, konfiguracija osi: 2 osi, število sedežev: 1, prostornina žlice: 0,4 m³, širina izkopne žlice: 160 mm, Leto izdelave: 2025, nosilnost: 980 kg, Oprema: dodatne luči, hidravlika, kabina, nastavljiva roka, pogon na vsa štiri kolesa, spojka prikolice, standardna žlica, vilice za palete, zapora diferenciala, zaščita za glavo, The H&R 2210-T telescopic loader with the new 3-cylinder Perkins turbo engine (18.5 kW, Mannheim, Germany) meets the Euro 5 emissions standard, even without a particulate filter. The new turbo engine is particularly fuel efficient, and with its 2-stage hydrostatic drive, it achieves a speed of approx. 16 km/h. Thanks to the large steering angle of 42° and a tight turning radius, it is highly maneuverable even in the smallest spaces. The 2210T wheel loader with telescopic arm comes standard with a quick coupler, pallet forks, and a standard bucket, allowing you to begin work immediately. With the additional hydraulic control circuit, various attachments for the yard loader can be used. The telescopic arm provides the 2210-T with excellent reach. The electric gear function on the joystick makes operating the H&R 2210T especially comfortable. H&R loaders are technically and visually optimized in-house and undergo comprehensive inspection and testing. In addition, every machine receives extensive corrosion protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. For our machines, a TÜV Süd technical report is available for obtaining an individual road operation permit in accordance with §21 StVZO (road registration / operating permit as a self-propelled work machine). Advantages of the H&R 2210T Telehandler: • Fully equipped • Efficient German-made engine (Euro 5) • Extensively optimized in-house • Extendable telescopic arm • Heated comfort cab • Includes pallet fork • Includes standard bucket (150 cm) • Joystick with float position and electric gear • Additional hydraulics for front attachments • Hydraulic oil cooler • Brake inching pedal • Reversing camera with display • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5 -15 • Radio with MP3 and USB Nwsdsul Af Dopfx Aqqjh • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch • 1-year spare parts warranty • CE compliant according to the EU Machinery Directive Price: Net: €24,975.00 VAT: €4,745.25 Gross: €29,720.25 Financing available! Options: 2-year warranty: €590 TÜV road registration / operating permit (work machine): €595 Transport within Germany & Austria upon request Technical Data: Engine: 3-cylinder Perkins turbo Power: 25 HP Emission class: Euro 5 Lifting capacity: 980 kg Lifting height: 3,310 mm (lower edge, standard pallet fork) Dumping height: 2,796 mm (lower edge, standard bucket tipped) Lift/lowering time: 4.0 / 3.5 seconds Wheelbase: 1.6 m Dimensions (L x W x H): 3,710 x 1,496 x 2,340 mm Weight: 2,430 kg Tires: 31 x 15.5 -15 Accessories and spare parts are available from us. Please include your phone number with inquiries!

Stanje: novo, Load capacity in kg: 1000 kg Reach: 4000 mm Height: 3000 mm (underside of jib) Total column height: 3790 mm Slewing range: 270 degrees Total weight: approx. 525 kg Description: - Festoon cable power supply for trolley - Drag chain, cable sag approx. 800 mm - Operation from floor using pendant control Including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, double-strand - Painted in RAL 5017 traffic blue - Lifting capacity 1 t - Hook travel 3000 mm - Maximum hook position 2442 mm - Design basis FEM 9.901 - Mechanism group 2m / M5 - Lifting, 2-speed (pole-switchable) 1.3 / 5 m/min Nwedpfxsxak Hxs Aqqeh - Lifting power 0.22 / 0.9 kW - Duty cycle 60% ED - Switching frequency 360 c/h Overload protection The crane system complies with the requirements of Machinery Directive 2006/42/EC as well as current UVV regulations DGUV Regulation 52 (formerly BGV D6). Included: - Anchor rods L200 (set) size LS 200 - Consisting of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - For foundation anchoring, including grouting accessories For alignment of the slewing jib crane, a mounting gap between the column base and the building floor must be provided. The mounting gap is to be grouted by the customer after approx. 4 weeks of crane operation. Illustration shows a similar crane system.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2010, obratovalne ure: 34.616 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1244801, skupna masa: 13.500 kg, premer rotorja: 500 mm, število rezil: 125, dolžina rotorja: 1.800 mm, vrsta vhodnega toka: Klimatska naprava, perforacija sita: 30 mm, Vecoplan Shredder Type VAZ 1800F, completely overhauled, ready for operation. The machine is fully functional; the following components have been replaced: cutting system (knife holders, knives, counter-knives, rotor hardfacing), vibration isolators, slide rails, screen, gearbox oils, as well as the electrical, hydraulic, and pneumatic systems. Nwsdpovx Rtaofx Aqqsh

Leto izdelave: 2006, stanje: skoraj kot novo (rabljeno), Pneumatic setting and leveling device for band saws. Nwedjdy A A Nopfx Aqqjh

Stanje: novo, Press brake tools/punches for Trumpf press brake H 256 mm, L 500 mm, L 550 mm, in segments Nwedpsiimz Rsfx Aqqjh

Stanje: skoraj kot novo (rabljeno), Manufacturer: V. Randwijks Rotor diameter: 500 mm Nwedpsg Snt Sjfx Aqqoh Rotor width: 700 mm Drive: 22 kW / 1,470 rpm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1981, WEINIG Hydromat H25R, ser. št. 2603-624, letnik 1981 z pohodno zvočno zaščitno kabino KASCHWIG – SKORAJ NOVA iz leta 2017 • Kratka dovajalna miza s težkim 6-valjnim podajalnikom 1. Vreteno spodaj 11,0 kW 2. Vreteno desno 11,0 kW 3. Vreteno levo 11,0 kW 4. Vreteno zgoraj 15,0 kW 5. Vreteno spodaj 11,0 kW 6. Vreteno spodaj 11,0 kW • Hidravlični podajalnik 6-60 m/min. • Podajalni motor 22,0 kW • 4 x pogonski mizni valji • Premer vretena 50 mm • Avtomatsko mazanje mize • Vreteno 1 + 4 + 5 + 6 z nasprotnim ležajem • Vreteno 1 + 4 z direktnim ravnalom • Podajalni valji 170 mm Nwsdpotkt Tpofx Aqqjh • 4 kosi hidro skobeljnih glav 150 mm • 6 kosov hidro skobeljnih glav 250 mm • Odsesovalni nastavek nad strojem

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.150 mm, skupna širina: 1.000 mm, skupna višina: 1.550 mm, vrsta vhodnega toka: trifazni, skupna masa: 700 kg, teža obdelovanca (maks.): 500 kg, vhodna napetost: 400 V, hitrost pomika os X: 30 m/min, širina transportnega traku: 400 mm, moč: 2 kW (2,72 KM), vhodna frekvenca: 50 Hz, SA250 or SA380 profile sanding machine for glazing bars, boards, beams and more. The SA380 brush sanding machine offers the following advantages: 1. Flexible: Handles all profiles including beams up to 400mm wide and 260mm high 2. Mobile: Mounted on wheels and can optionally be equipped with a mobile extraction unit 3. Powerful: Automatic feed speed of 13–30 m/min ensures high throughput 4. Superior results: 8-axis system with flexible Fladder brushes delivers excellent finishing: 4 brushes sand WITH and 4 sand AGAINST the feed direction (4 sides, 2 per side) Nwjdpfsw Av Ivex Aqqsh 5. Safe: Fully enclosed construction, requiring only a single 120mm extraction connection. The SA250 and SA380 models are extremely robust and manufactured entirely in Denmark. We currently have two demonstration machines in stock.

Leto izdelave: 2020, stanje: novo, Oxygen and temperature measurement in molten metals Nsdpfjgqr A Dsx Aqqjwh