LPG viličarji

Toyota Treibgas-Stapler

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, hod: 200 mm, proizvajalec krmilnikov: Amada, model krmilnika: Amada AB-Pad, število osi: 4, Oprema: dokumentacija / priročnik, Model: Amada HFE M2 100t 3m, 4-osna preša za upogibanje Leto izdelave: 2014 Na voljo takoj Tlačna sila (kN): 1000 Kjdpfjynbfvsx Al Nelr Dolžina nosilca (mm): 3110 Razmik med stojali (mm): 2705 Izliv (mm): 420 Standardni hod (mm): 200 Standardna odprtina (mm): 470 Širina nosilca (mm): 60 Višina mize (mm): 960 Dovodna hitrost (mm/s): 1-100 Hitrost upogibanja (mm/s): 1-10 Povratna hitrost (mm/s): 1-100 Število krmiljenih osi: 4 Dolžina (mm): 4580 Globina (mm): 2450 Višina (mm): 2685 Teža (kg): 6900 Varnostna naprava tip AKAS Dodatni par omejevalnih prstov Nosilna roka za obešanje, nastavljiva po višini z dvema stranskima omejevalnikoma Obešalni element za nosilno roko in podporno mizo primeren za serijo HFE-M2.

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head Klsdpfx Alelgvkie Nor AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: novo, Measuring lengths: up to 5700 mm Tube length: 6000 mm Number of supports: 7 Material: stainless steel tube Kljdpfxefv Atls Al Nor Dimensions (L x W x H): 6.0 x 0.3 x 0.2 m The length measuring system is available as a retrofit for existing roller conveyors in lengths ranging from 2 to 6 meters. The guide rail is made from rectangular tube 60 x 30 x 3 mm. The steel measuring tape is self-adhesive. The magnifier with 6x magnification facilitates precise adjustment to the desired length. Note: This offer is for the stop system only, without roller conveyor!

Stanje: novo, Leto izdelave: 2022, Uporabni material: kovina Stanje: novo Tip laserja: vlakenski (fiber) laser Delovno območje: 3000 x 1500 mm Hitrost rezanja: 0–40.000 mm/min Podprte grafične oblike: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT Debelina rezanja: 0–30 mm CNC: da Način hlajenja: vodno hlajenje Krmilna programska oprema: Bodor Pro Država izvora: Kitajska Blagovna znamka: Bodor Certifikati: CCC, CE, GS, ISO, SGS Blagovna znamka laserskega vira: IPG/MAX Blagovna znamka laserske glave: bodorgenius Klodjgyw Sdjpfx Al Ner Blagovna znamka krmilnega sistema: bodorpro Teža (kg): 2.200 kg Ključna prodajna prednost: ležišče iz varjene plošče tipa utor-pero (tenon-and-mortise) Garancija: 3 leta Moč laserja: 1.000 W Napajalna napetost: 110V/220V/380V, 50Hz/60Hz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Mechanical guillotine shear Make: Petersen Machinery Model: Cidan HSM-F 20/3 Year: 2005 Technical Data Klodpfx Aju Utaisl Njr Manufacturer: CIDAN Model: HSM-F 20/3 Sheet width: 2050 mm Sheet thickness: 3 mm Cutting angle: 2° Connection: 400V / 20A Dimensions: approx. L 2.60 x W 1.60 x H 1.40 m Weight: approx. 1.5 t Features • Manual backgauge 750 mm • Continuous hold-down bar with hard rubber strip • Angle gauge • Extendable support table All information is provided without guarantee. A demonstration is possible at any time in our showroom.

Stanje: rabljeno, Leto izdelave: 2018, vrsta goriva: dizel,

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 3.454 h, • Press force: 1000 kN • Bending length: 3060 mm • Usable installation height with manual or hydraulic tool clamping (Option: Increased installation height): 350 mm (500 mm) • Usable installation height with TRUMPF Quick Clamp (Option: Increased installation height): 430 mm (580 mm) • Max. distance between the lower edge of the press beam and the upper edge of the machine table (Option: Increased installation height): 470 mm (620 mm) • Tilt adjustment of pressing beam: ± 6.5 mm • Free distance between uprights: 3384 mm • Table width: 100 mm • Working height¹: 1049–1069 mm Speeds • Y rapid traverse²: 200 mm/s • max. Y working stroke³: max. 15 mm/s • Y-axis return: 200 mm/s • X-axis: 500 mm/s • R-axis: 200 mm/s • Z-axis: 1000 mm/s Positioning accuracy • Y-axis: 0.01 mm • X-axis: 0.05 mm • R-axis: 0.1 mm Stroke and backgauge zones • Y-axis stroke (Option: "Increased installation height"): 200 mm (350 mm) • X-axis travel: 600 mm • max. backgauge zone in X-direction: 860 mm • R-axis travel: 150 mm Control • Standard: T3500T Multi-Touch Control Electrical values • Connected load (IEC): approx. 20 kVA Dimensions and weights • Footprint (length x width): 3607 x 1644 mm Kjdpfx Aljyfxdws Njlr • Height (Option: Increased installation height): 2370 mm (2700 mm) • Weight (Option: "Increased installation height"): 7700 kg (8300 kg) Paint / Color scheme • Basic structure: White = NCS S 0505 R80B • Blue = approx. RAL-Design 250 20 20 • Black = RAL 9005; Silver parts with RAL 9006 Equipment Extended machine equipment BendGuard: – Optoelectronic safety device enabling fast and safe bending. – The maximum Y rapid traverse speed is not limited in pure foot mode. – Tool height can be set simply and quickly with rack solution and weight compensation. – BendGuard can be easily retracted for side tool changes without refitting. – BendGuard is insensitive to shocks (dismounting), as the housing electronics are not connected. Table consoles (2 pieces): – Table consoles adjustable manually in Z and R directions, with quick clamping. – Facilitate handling of large and heavy workpieces and can be used as a storage surface for finished parts. – Load capacity: 70 kg per console. LED work area lighting front and back: – Excellent illumination of the interior and working area in front of the machine. – Modern LED technology: energy-saving, does not heat up, and extremely long service life. DXF import: – DXF drawings can be loaded into the 2D control.

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Rabljena CNC prebijalnica Durma Kodpfx Alox Iflzs Nelr Tip AD Servo 30175 Kapaciteta 3050 x 175 ton Cybelec ModEva 15T CNC krmiljenje Y1, Y2, X in R osi CNC vodene CNC bombeiranje Akas Fiessler laserska varnost Vključno s kompletom orodij

Stanje: novo, Cutting diameter: 225 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 245 x 150 mm Cutting speed: 45/90 m/min Saw band dimensions: 2480 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 45° round: 145 mm Cutting capacity at 45° square: 145 mm Kodpjgxi D Tsfx Al Nelr Connection voltage: 400 Volt Total power requirement: 1.5 kW Machine weight approx. 0.2 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Mitre band saw - Mitre cuts up to 60° to the left - Vise with quick-release mechanism - Band tension control - Electric cooling system

Stanje: novo, Bördelwerkzeug für Amada/LVD/Trumpf Kedpfji Hbcwex Al Nslr