Viličar - Dizelski viličar

LINDE H 18 D /391

Stanje: rabljeno, številka stroja/vozila: MAN00000E01086979, Leto izdelave: 2022, obratovalne ure: 670 h, dvižna višina: 3.700 mm, vrsta goriva: dizel, moč: 37 kW (50,31 KM), proizvajalec motorjev: Kubota, vrsta prenosa: hidrostat, Nosilnost: 2.500 kg Gradbena višina: 209 cm Stanje sprednjih pnevmatik: 0 Stanje zadnjih pnevmatik: 0 Transportne mere (D x Š x V): 4,19 x 1,45 x 2,08 m Rsdpfx Apotvlqmobou Za dodatne informacije se obrnite na skupino PFEIFER.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, vhodna frekvenca: 50 Hz, Brand: Pramac GBW 22 P DDS Soundproof Canopy: 66 dB(A) at 7m Continuous Output (3-phase): 20.12 kVA / 16.10 kW Maximum Output (3-phase): 22 kVA / 17.6 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel Engine: Perkins 404J-22G Emissions Standard: STAGE V Cooling System: Water Cylinders: 4 in-line Displacement: 2220 cm³ Redeq A T Dwspfx Apbeu Aspiration: Naturally aspirated Speed: 1500 rpm Engine Control: Mechanical Fuel Consumption at 3/4 Load: 4.0 liters/hour Fuel Consumption at Full Load: 5.74 liters/hour Fuel Tank Capacity: 51 liters Alternator: MeccAlte ECP28-M4 C Type: Brushless Number of Poles: 4 Regulation: Electronic (AVR regulation) Digital Controller: ACP Sockets with RCD: 1x 32A - 400V / 5-pin Dimensions and Weight: Length: 1645 mm Width: 870 mm Height: 1060 mm Tank Capacity: 51 liters Weight, dry: approx. 546 kg Central Lifting Eye Forklift Pockets Glow Plugs Engine Preheating (PHS) Battery Trickle Charger

Leto izdelave: 2023, stanje: novo, Always in stock, available in left- and right-hand versions with automatic motorized cleaning. Riedex DM-200 Motor power: 4.0 kW Plug-and-play. Packed on a pallet! Ready for shipping. Alternatively available with JET cleaning system. Many different configurations possible: - with rotary valve (can be supplied with base frame if required) - with briquetting press and more... Rodpfxeku Aibs Apbeu

Stanje: rabljeno, Pressure: 55 t Outreach: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Stroke rate: 120 strokes/min Ram adjustment: 55 mm Ram surface: 290 x 210 mm Ram bore: 40 H7 mm Through-hole in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight: approx. 3.4 t Space requirements: approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Mechanical overload protection in ram (shear plate) - Control cabinet with touchscreen Redpfscp Apysx Apbju - Foot switch

Stanje: novo, Pressure: 40 t Rjdpfxsb U Hwts Apbou Throat depth: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Through-hole in table: 210 x 170 mm T-slots: 22 Clamping plate: 570 x 450 x 65 mm Total connected load: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Hydraulic clutch-brake combination - Central lubrication (Vogel) - Cam control (Balluff) - Control cabinet with touchscreen - Height-adjustable table - Foot switch

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths Rodpfsiu Smbjx Apbou 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: novo, Leto izdelave: 2023, Manufacturer: CGM e41 Rodpfx Apjq A U Aijbeu Continuous output (3-phase): 41.0 kVA / 32.8 kW Maximum output (3-phase): 45.1 kVA / 36.0 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Engine: Model: Yanmar 4TNV98T-ZGECS EU Stage IIIA – approved for stationary applications only Cooling system: Water-cooled Fuel: Diesel Cylinders: 4 Displacement: 3,319 cm³ Aspiration: Naturally aspirated Speed: 1,500 rpm Fuel consumption at 3/4 load (L/h): 8.5 Generator: MECC ALTE Type: Brushless AVR regulation Digital control unit: ComAp AMF Dimensions & Weight: Length: 2,000 mm Width: 850 mm Height: 1,275 mm Dry weight: 880 kg Fuel tank capacity: 200 l Oil catch pan Engine coolant pre-heater Battery trickle charger 3-way valve Soundproof canopy: RAL 5015 Sky Blue Base frame: Black

Leto izdelave: 1995, stanje: rabljeno, Pressure: 125 t Stroke: 10–80 mm Strokes per minute: 240 spm Ram adjustment: 80 mm Table surface: 850 x 600 mm Ram surface: 760 x 550 mm Pass-through opening in table: 850 x 130 mm, adjustable Table height: 1100 mm Pin hole in ram: Ø 50 mm Total power requirement: kW Machine weight: approx. 13 t Required space (LxWxH): approx. 3000 x 2000 x 3300 mm Pneumatic clutch-brake combination Rjdpfx Apelp U Nqjbju Manual ram adjustment Manual stroke adjustment Machine number: 212341 Centralized oil lubrication Roll feed: Alba GVHY300 Straightening machine: Soprem BRM 19/150/16/U

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, obratovalne ure: 13.000 h, * 13.000 delovnih ur * Pnevmatske gume 70% Rsdpfoy E Hd Hjx Apbou

Stanje: rabljeno, Leto izdelave: 1996, Pressure: 80 t Outreach: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table surface: 830 x 610 mm Ram surface: 650 x 400 mm Gap depth (to rear): 630 mm Total power requirement: kW Rodpfx Ajtycdkopbeu Machine weight approx. 8.1 t Space requirement approx. W 1.2 x D 1.9 x H 3.3 m Equipment: - with gear-driven wheels - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection - ejector - central grease lubrication - cover plate for drop-through hole - stepless speed control via frequency converter - The machine will be mechanically inspected and overhauled in our facility, and will receive a new control cabinet with safety control and touchscreen - Current UVV inspection with braking time measurement