Ročni paletni voziček

Toyota LWE 180

Stanje: rabljeno, številka stroja/vozila: 6736895, Leto izdelave: 2020, obratovalne ure: 430 h, vrsta goriva: električni, kapaciteta baterije: 230 Ah, napetost baterije: 24 V, dolžina vilic: 1.150 mm, Lastna teža: 521 kg Dvižna zmogljivost: 1.800 kg Omrežna napetost: 24 V CE-oznaka: da Transportne mere (D x Š x V): 1,7 x 0,72 Za več informacij kontaktirajte Karla Leitnerja. PIN-koda Lsdpfjg Hvqnox Al Rert

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Prodajam tračni transporter, viden na fotografijah. Za več informacij prosim kontaktirajte. Lsdpfx Alexlaa Ss Rsrt

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 1.155 h, nosilnost: 1.800 kg, vrsta goriva: električni, dolžina vilic: 1.150 mm, vrsta pogona: Elektro, Nizkodvižni paletni viličar Težišče tovora: 600 Lsdsvvdy Uepfx Al Rert Tehnično stanje: dobro Napetost baterije: 24 V Kapaciteta baterije: 225 Ah Opis: Cene so nezavezujoče, iz skladišča, brez prevoza in DDV. Brez garancije in možnosti vračila. Ogled možen po dogovoru. Uporabljajo se naši splošni pogoji. Vključuje: počasna vožnja, PIN-koda, zaščitni jekleni predpasnik za noge, E-bar, hupa, tandem kolesca za vilice iz poliuretana, pogonsko kolo Topthane, podporno kolo iz poliuretana, srednji baterijski prostor s plastičnim pokrovom.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2017, obratovalne ure: 985 h, nosilnost: 1.800 kg, dvižna višina: 54 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 1.300 mm, Friedmann Forklifts – Remade for Action Used industrial trucks from selected premium manufacturers, fully serviced, inspected, and professionally reconditioned by us in accordance with FEM-4.004 (UVV) standards. Custom modifications of all kinds possible to meet your specific requirements. International transport with suitable vehicles and customs clearance available upon request. See for yourself and visit our facility. Friedmann Forklifts – Our Quality Commitment - Full operational reliability as per FEM-4.004 - Serviced & tested (C5 test protocol) battery for electric units (minimum 70% capacity) - Functional tires according to FEM-4.004 (minimum 70% tread depth) - Mast, carriage, attachments, and hydraulic systems inspected - Steering axle safety-inspected - Forks and lift chains with a maximum wear limit of 40% - Driver’s seat and seatbelt in as-new condition - Newly painted in original colors with original decals Industrial Truck Data - Manufacturer: TOYOTA - Model: LWE 180 - Drive: Electric - Rated capacity: 1,800 kg - Lift height: 54 mm - Year of manufacture: 2017 - Operating hours: 985 - Serial number: 6527048 Mast/Fork Data - Mast type: – Lrjdpfx Ajy Rnhkjl Rot - Lift height: 54 mm - Fork length: 1,200 mm Dimensions - Unladen weight: 315 kg Battery & Charger - Battery voltage: 24 V - Battery year of manufacture: 2017 - Charger voltage: 24 V (on request) Attachments & Special Equipment Attachments: Special equipment: Front tires: 0 x / Polyurethane / Rear tires: 0 x / Polyurethane /

Leto izdelave: 2026, stanje: novo, The washing system with hammer mill for fruit and vegetables is constructed entirely from stainless steel and is equipped with a sorting grid, a washing tank, and a conveyor belt. The produce is loaded into the water, where it undergoes a preliminary wash. It is then transported further via the conveyor belt, which cleans the fruit thoroughly with fresh water. After cleaning, the produce enters the mill, where it is processed to the desired mash consistency using the preferred screen. Ledpfev Srgusx Al Rert • Easy to clean • Low maintenance requirements • Belt speed is continuously adjustable in both directions • Equipped with 2 swivel castors • Equipped with 2 fixed castors Technical specifications: • Rated output: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4“ • Connection for cleaning: G ½“ • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6316845, Leto izdelave: 2014, obratovalne ure: 6.331 h, nosilnost: 1.800 kg, vrsta goriva: električni, dolžina vilic: 1.150 mm, vrsta pogona: Elektro, Low-lift pallet truck Chassis number: 6316845 Load centre: 600 mm Technical condition: very good Battery voltage: 24V Battery capacity: 225Ah Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty/guarantee and no returns. Inspection possible by appointment. Our general terms and conditions apply. Lrjdou D Szyopfx Al Rot Medium battery compartment, drive wheel Vulkollan, support wheel Vulkollan, tandem fork rollers Vulkollan, steel apron, charger year 2024 24V/30A

Stanje: rabljeno, Leto izdelave: 1999, 6 stoječih skladiščnih rezervoarjev z plaščno hlajenjem Stroj (dodatek): stoječi, hladilni nerjavni jekleni rezervoarji Lrodpfxew Tlpps Al Rot Vsebina: 2200 l Največji tlak: 0,99 bar Dolžina: 1000 mm Širina: 1000 mm Višina: 1965 mm Upravljanje / krmiljenje: ročno Material: nerjavno jeklo 1.4301 Postavitev / položaj: samostoječe Osnovna konstrukcija: valjasti rezervoar z izbočenim dnom in nogami iz kvadratnih cevi na kalotah Oprema: pršilna krogla, zaporni aparat, manometer, 1 območje plaščnega hlajenja, cev za prikaz vsebine, kontrolna odprtina, termometer in vzorčevalnik v plašču, ročni ventil za regulacijo hlajenja, sredinski izpust na dnu

Stanje: pripravljen za uporabo (rabljen), Feed the crown caps manually into the drop chute; the machine places the crown cap onto the bottle and presses it on. Lrsdpfxjfh Dlrs Al Ret

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard Ledpfxjh Ek Dao Al Rert - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, APLIKATOR CAP 30 1000 ZA HELICAP 23 PRO: Leto izdelave: 2019 Različica: 400V 9.000 delovnih ur Lrsdpfsyynd Rsx Al Rst Kot novo stanje Stroj bo v proizvodnji do 15. maja.