Viličar

Toyota 8 FD F 30

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, vrsta goriva: dizel, Oprema: kabina, Viličar s stranskim pomikom, levo-desnim pozicioniranjem vilic in triplex dvižnim drogom. Ihedpfox Sxvzex Af Tet

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 700 mm, največja višina reza: 250 mm, delovna višina: 850 mm, moč: 7,5 kW (10,20 KM), We are selling 1 x JRIMAC under-table crosscut saw UKS 1,000 Crosscut capacities: 60x940mm – 140x820mm – 180x720mm – 220x520mm – 240x340mm Maximum cutting height: 260mm Saw blade: 700mm Ihsdpferfudrex Af Tot Working height: 850mm Extraction ports (top and bottom): 160mm - Infinitely adjustable, pneumatic feed rate - Hydraulic brake cylinder for uniform stroke speed - Pneumatically controlled workpiece clamping device - Cutting operation triggered via two-hand control with safety guard - Roller conveyors and stop systems available on request

Stanje: rabljeno, številka stroja/vozila: 52-8FDF30-84089, Leto izdelave: 2022, obratovalne ure: 29 h, dvižna višina: 5.000 mm, prosto dvigovanje: 1.270 mm, vrsta goriva: dizel, dolžina vilic: 1.200 mm, Lastna teža: 5.080 kg Dvižna zmogljivost: 3.000 kg Gradbena višina: 242 cm Sprednje pnevmatike: SE Zadnje pnevmatike: SE Transportne mere (D x Š x V): 2,87x1,33x2,42 Za več informacij se obrnite na Karla Leitnerja. Redno vzdrževana najemna naprava takoj na voljo za prodajo PIN koda, panoramsko ogledalo, minilever, utripajoča luč, sprednje delovne luči, Bluespot Ihjdpfju Dwgnsx Af Tot

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: CAT0DE50LN7B00452, vrsta goriva: dizel, moč: 40 kW (54,38 KM), proizvajalec motorjev: Caterpillar C3.3, Namen uporabe: gradbeništvo Lastna teža: 889 kg Moč generatorja: 50 kVA CE oznaka: da Prostornina rezervoarja za vodo: 103 l Transportne mere (D x Š x V): 2,3x0,96x1,4 Ijdjtqlf Depfx Af Toht Za več informacij kontaktirajte Kennyja Bongersa, Tijmena Pesselseja, Arjena van Dijka ali DPX Power.

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 13.320 h, Serijska številka: K3xxxx Za dodatne informacije se obrnite na ATS Norway. Ihjdpfx Asvgx Rpjf Tjt Prosimo, navedite referenčno številko pri povpraševanju: 18892 Specifikacije: - Model 2001 - Certificirano do 25.02 - Delovnih ur: Približno 13.320 - Teža: 24.500 kg - 118 kW - Podvozje (glej slike) - Širina gosenic: 60 cm - KM hitra spojka - Gjerstad izkopna žlica - Ekstra lahek - Easy Dig Novatron - Radio/CD - Klima/klimatska naprava - Lastna izvedba storitev - Pripravljen za dostavo Opis: Komatsu PC290 gosenični bager, letnik 2001. Stroj se prodaja z hitromenjalcem in izkopno žlico. Certificiran do 25.02. Delovne ure: 13320 Lastna teža: 24500 Skupna teža: 24500 Letno kontroliran: da Kontroliran do: 02.25 Kw: 118 Model: PC240LC-6K gosenični bager z izkopno žlico

Leto izdelave: 2009, Stanje: zelo dobro (rabljeno), I am selling a HIRZT Livra/B throughfeed CNC drilling machine, year of manufacture 2009. Maximum working width: 820 mm Configuration: 14 + 6 + 2 drilling spindles Return system that transports the workpieces either back to the operator or to the rear in throughfeed operation. Overall dimensions: 2000 x 2000 (+800 +800 mm) Total weight: 1350 kg Comes with complete documentation and CE certification. Ihodpfx Afsnxqdwo Tot Very good condition. Available immediately.

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, skupna dolžina: 1.925 mm, gradbena višina: 1.361 mm, vrsta pogona: Diesel, gradbena širina: 1.110 mm, Ostalo Isdpeumvb Ijfx Af Tsht Tehnično stanje: novo

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 2.688 h, nosilnost: 3.000 kg, dvižna višina: 4.200 mm, vrsta goriva: električni, gradbena višina: 2.780 mm, kapaciteta baterije: 620 Ah, preostala kapaciteta baterije: 88 odstotek, napetost baterije: 80 V, Certificirano po DGUV do: 01/2027, Oprema: CE označba, UVV varnostni pregled, bočni pomik, kabina, osvetlitev, podaljšek vilic, popolna servisna zgodovina, vlečna vilica, Chariot élévateur électrique Still RX 60-30 avec les caractéristiques suivantes : Capacité de levage : 3 000 kg Hauteur de levage : 4 200 mm Hauteur hors tout : 2 780 mm Année de construction : 2019 Heures de fonctionnement : 2 688 Chariot élévateur électrique STILL 3,0 tonnes avec cabine intégrale et chauffage, batterie à 88 %, bons pneus (neufs à l'arrière), mât télescopique à grande visibilité, positionneur de fourches avec déplacement latéral, éclairage conforme au code de la route, fourches de 1 200 mm, chargeur inclus. Ijdsxw D T Hopfx Af Tsht Prix départ usine, inclut service 500 heures selon prescription constructeur STILL et contrôle FEM (UVV) en vigueur lors de la vente Visite, démonstration et essai sur rendez-vous téléphonique. Vente réservée exclusivement aux professionnels, sous réserve de vente préalable, d’erreurs et de fautes de frappe. Nous pouvons livrer votre nouveau chariot élévateur à moindre coût avec notre propre porte-engins à rampe (frais de transport sur demande). Plus d’informations et d’offres sur notre site internet.

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 4.500 h, CAT Stromaggregat / Flutlichtanlage Typ: GEP 18 LT Leistung des Generators: 16,5 kVA Dieselantrieb 4-Zylinder-Motor Mast mit 6 Flutlichtstrahlern Vierfach-Abstützung 80 km/h Schnellläufer Feuerverzinktes Fahrgestell Isdpfowb Nhtjx Af Tjht Höhenverstellbare Deichsel Kugelkopf- und Maulkupplung usw...

Leto izdelave: 2009, Stanje: rabljeno, Used machine Year of manufacture: 2009 Condition: refurbished Description: The concept of the machine is extremely simple. The workpiece is placed into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece inside the machine. After activating a foot switch, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below so that the generated chips do not remain on the workpiece as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece length can be unlimited, as it is fed towards the drilling unit (X-axis). The drilling spindles are freely programmable, either individually or as a block, and move along the Y-axis. The drilling depth as well as the horizontal drilling units are controlled via the Z-axis. Once all drilling operations are completed, the workpiece is returned to the loading side, or optionally, conveyed to the unloading side. Whereas conventional machining centers require the workpiece to be clamped using vacuum, and the vacuum clamps must be adjusted to the size of the workpiece, this step is completely eliminated with the 3-axis controlled point-to-point drilling machine. Advantages: - High processing speed - Good price-performance ratio - Minimal space requirements All drilling operations can be performed in the smallest of spaces: - Line boring - Construction drilling - Fitting drilling - Cabinet connector drilling Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled feed of the panel via crossing pneumatic clamping gripper - Y: NC-controlled drilling head movement Iodpfx Ajwmhmfsf Tsht - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-downs in the infeed area - Pneumatic clamping gripper for transport - Pneumatic lockable side stop with rollers - Control via PC running Windows XP (1 GB flash memory) - 8'' color screen - Alphanumeric multifunction keyboard incl. mouse - Network card - USB interface Technical data: - Number of controlled axes: 3 - Maximum panel width: 1,000mm - Maximum drilling width: 800mm - Maximum feed speed (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill diameter: 35mm - Maximum total drill length: 70mm - Drill shank: 10mm with clamping surface - Connected load: 2.5 kW - Extraction connection diameter: 100mm - Required pressure: 6 bar - Working height: 900mm - Folding roller support at the infeed side, 500 x 750mm Dimensions: 1,650 x 1,920mm Availability: short-term Location: North Rhine-Westphalia