Horizontalni obdelovalni center
TOYODA FH 550 SX

Name: TOYODA FH 550 SX
Brand: TOYODA
Availability: InStock

Leto izdelave

2008

Stanje

Rabljeno (popolnoma funkcionalen)

Lokacija

Hessen

Horizontalni obdelovalni center TOYODA FH 550 SX

Spremljaj dražbo

Podatki o stroju

Oznaka stroja:: Horizontalni obdelovalni center

Proizvajalec:: TOYODA

Model:: FH 550 SX

Leto izdelave:: 2008

Stanje:: pripravljen za uporabo (rabljen)

Funkcionalnost:: popolnoma funkcionalen

Obratovalne ure:: 15.289 h

Tehnične podrobnosti

Potovalna razdalja osi X:: 750 mm

Pomik osi Y:: 800 mm

Pomik po osi Z:: 850 mm

Največja hitrost vretena:: 15.000 obr/min

Število mest v zalogovniku orodij:: 121

zagotovitev

Lokacija:: Hessen, Nemčija – Razdalja: pribl. 619 km

Razpoložljivost:: takoj po zaključku dražbe

Dobavni pogoji:: FCA

Stroški demontaže in nakladanja:
2.500,00 € (zavezujoče)

Prevzem na lokaciji:
brezplačno

Stroški pošiljanja:

Opis

TECHNICAL DETAILS

Travel distances
X-axis travel: 750 mm
Y-axis travel: 800 mm
Z-axis travel: 850 mm

Worktable (axis controlled version with AC axis motor)
Pallet size: 550 x 550 mm
Minimum indexing increment: 0.001 degree

Spindle
Tool holder taper: #50
Drive power: 30/22 kW
Spindle speed: 15,000 rpm

Tool magazine
Tool stations: 121 tools
Magazine type: Chain magazine
Design: BT-50

MACHINE DETAILS

Control: FANUC 31i

Footprint (L × W × H): approx. 2,780 × 1,500 × 2,300 mm

Operating hours
Run time: 15,289 h
Control on-time: 106,856 h

EQUIPMENT
Coolant system

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Obdelava plačil

Dodatni stroški nakupa:: 18 %

Plačilni pogoji:: 100 % predplačilo

Načini plačila:: Bančno nakazilo

Račun se izdaja v višini najvišje ponudbe, pri čemer se prištejejo morebitni stroški demontaže/nakladanja, stroški pošiljanja ter dodatni stroški nakupa in zakonski DDV.

Podrobnosti ponudbe

ID oglasa:: A20302265

Referenčna številka:: AUC-2510037

Posodobitev:: nazadnje dne 15.10.2025

Ekskluzivna ponudba:: na voljo samo na dražbi

Opazovati

Kontakt

Kontaktna oseba: Cedric Schuhmann

ID stroja: 20302265

+49 201 8... oglasi

Telefon: +49 201 857 861 77

Zaščita kupca Machineseeker

Varno plačilo prek fiduciarniega računa

Strogo preverjeni prodajalec

Osebna in večjezična podpora

Izplačilo kupnine se izvede šele po predaji blaga.

ogled

Možen ogled

Machineseeker v splošnem priporoča ogled rabljenih strojev.

Vsi podatki so vneseni po najboljšem vedenju in vesti – prepričajte se na kraju samem.

Ponudnik

Profesionalni komercialni prodajalec
Od 2010 pri Machineseeker

Hessen Nemčija

Razdalja: pribl. 631 km

Tukaj bi lahko stala vaša naprava

Dražba s številko 1

Prodate v samo nekaj tednih!

Prodajate po najvišji ceni!

Prodajate brez fiksnih stroškov in tveganj!

ali pokličite +49 201 857 861 10

Razpravljati o sodelovanju

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Obdelovalni center - univerzalni DECKEL-MAHO DMG DMC80FD duoBLOCK

Nürnberg

470 km

Obdelovalni center - univerzalni
DECKEL-MAHO DMGDMC80FD duoBLOCK

Pokliči

Stanje: rabljeno, Leto izdelave: 2009, X travel: 800 mm Y travel: 800 mm Z travel: 800 mm Control: SINUMERIK 840D Spindle speeds – stepless: 5 – 10,000 rpm Drive power at 40% duty cycle: 38.00 kW Drive power at 100% duty cycle: 25.00 kW Torque at 40% / 100% duty cycle: 288 / 187 Nm Spindle taper: HSK 100 Feed rate X/Y/Z axis: 0 – 60,000 mm/min Rapid traverse X/Y/Z: 60 m/min Feed force X/Y/Z: 12.00 kN B-axis: 180 x 0.001° Rapid traverse B-axis: 10 rpm Pallet size: 800 x 630 mm Table load capacity: 0.80 t C-axis: 360 x 0.001° Table rotation speed – stepless: 1 – 800 rpm Table drive power: 13.85 kW Max. torque at faceplate: 1,550 Nm Tool magazine: chain magazine, 60 positions Tool diameter: 110 mm Tool diameter with 2 free locations: 230 mm Max. tool length: 450 mm Max. tool weight: 30.00 kg Total connected load: 80.00 kW Machine weight approx.: 18.00 t Installation dimensions approx.: 7.50 x 5.50 x H3.50 m 5-axis machining centre with SIEMENS Sinumerik 840D control, band filter system 980 l, chip conveyor, coolant through spindle, extraction unit, BLUM tool measurement, probe, operation mode 4, tool taper cleaning, Ledpfex Tiy Tox Adkshd hydraulic clamping with proportional valve.

Poglej podrobnosti

Mali oglas

Paletiziran horizontalni obdelovalni center DOOSAN NHM8000

Montpellier

921 km

Paletiziran horizontalni obdelovalni center
DOOSANNHM8000

180.000 €

Fiksna cena plus DDV

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2014, obratovalne ure: 8.035 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MH0017-000100, potovalna razdalja osi X: 1.400 mm, pomik osi Y: 1.050 mm, pomik po osi Z: 1.200 mm, proizvajalec krmilnikov: fanuc, model krmilnika: 31i, delovne ure vretena: 6.000 h, Doosan NHP 8000 horizontal machining center, new, equipped with Fanuc 31i control cabinet Included equipment and options: 800x800 mm pallet centering system Hand-held coolant gun Lhjdpfx Aswu Rgqsdkjd High-pressure coolant system, 70 bar, 7.5 kW with cyclone filtration Automatic tool changer Tool load monitoring Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe

Poglej podrobnosti

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
All prices and bids are net prices and do not include VAT.
Stated dismantling and loading costs are binding.
All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
The duration of an auction may be subject to change.
By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
Submitted direct or maximum bids are binding.
Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
The General Auction Terms of Machineseeker Group GmbH apply.