Različni stroji

TORNOS Lot divers pour SAS 16

Stanje: rabljeno, Swing over bed: 250 mm Swing over cross slide: . mm Distance between centers: approx. 400 mm Center height: approx. 125 mm Speed range: 80 - 3000 rpm Number of speed steps: 18 Spindle bore: 24 mm Tailstock quill taper: MT 3 Weight: approx. 400 kg Dimensions: approx. 1200 x 650 x 1300 mm Four-jaw chuck diameter: 125 mm Including Röhm four-jaw chuck, Ø 125 mm, with drilling and turning jaws; Iodpswa Dz Ejfx Agpoa Collet chuck with collets 1-20 mm in 1 mm increments; Multifix size A with 3 tool holders; Chuck guard with safety interlock

Stanje: dober (rabljeno), Leto izdelave: 1991, 1 rabljeni univerzalni orodni rezkalni stroj Proizvajalec: Deckel Tip: FP 1 z aktivnim digitalnim prikazovalnikom Heidenhain Leto izdelave: 1991 Tehnični podatki: X-hod: 300 mm Y-hod: 160 mm Z-hod: 340 mm Vpenjalo vretena: SK 40 Vertikalni hod pinole: 60 mm Isdpjw Sdmdjfx Agpoa Velikost mize: 600x210 mm Hitrosti vretena: 40–2000 vrt/min Teža stroja cca: 1 t Priključna moč: 7,5 kW Prostorske potrebe cca: 1,6x1,3x1,8 m Opremljen z: fiksno mizo nagibno mizo univerzalnim delilnikom različnimi držali za orodje horizontalnim naslonom

Stanje: dober (rabljeno), Leto izdelave: 2000, Weiler Primus VC, Year of manufacture: 2000, Digital readout, Isdov Ifxispfx Agpea Centre distance: 500 mm, Max. swing over cross slide: 150 mm, Spindle speed up to 4,000 rpm, Spindle bore: 40 mm, Spindle drive: 1.5 kW, Multifix toolholder, 24 longitudinal feeds, Metric threads, Inch threads,

Stanje: rabljeno, Leto izdelave: 1988, x-travel 310 mm y-travel 340 mm z-travel 170 mm Total power requirement 2.5 kW Machine weight approx. 900 kg Space requirement approx. m M A C M O N Universal tool milling machine with HEIDENHAIN 3-axis digital readout, type M 100 D Year of manufacture 1988 Serial no. 1536 _____ Table travel: longitudinal motorized/manual 290 / 310 mm vertical motorized/manual 310 / 340 mm Cross traverse (manual) 170 mm Fixed angle table 215 x 600 mm Iedpfst Hxatox Agpja Swivel vertical head 360° Vertical head quill travel 70 mm Clearance under spindle 350 mm - Projection of the vertical spindle approx. 100 - 320 mm Spindle taper SK 40 21 vertical spindle speeds 50 - 2,500 rpm horizontal 40 – 2,000 rpm Feed ranges in steps 9 – 450 mm/min. Spindle drive 2.2 kW Total power 2.5 kW - 380 V - 50 Hz Weight 900 kg Accessories / Special features • 3-axis HEIDENHAIN digital readout • Selector knobs for feed and spindle speeds in modern design (no levers) • Fixed angle table approx. 215 x 600 mounted • Machine lamp, swiveling chip guard • Equipped with a sliding vertical milling head ISO 40, quill stroke 70 mm • Control cabinet mounted on machine, built-in coolant unit, chip tray, various milling arbors, etc. Condition: good – ready for demonstration, ideal for training workshops/vocational training Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 290 mm, Year of manufacture: 1986 Travel distances: X = 300 mm Y = 160 mm Z = 290 mm Equipment: - Standard accessories - Vertical milling head, ISO 40/ 20x2 - Fixed angle table 210 x 600 mm, NEW! Ijdpswgafyefx Agpja - Retrofitted safety guard for milling spindle, electrically interlocked, NEW! - 3-axis active digital readout (TNC113) - Coolant system - Machine lamp - Machine feet - Documentation Condition: Good, mechanics and control system workshop-tested

Stanje: novo, Centre length ----- 1000 mm Centre height ----- 180 mm Swing diameter ----- 360 mm Spindle bore ----- 40 mm Bed width ----- 260 mm Spindle speed ----- 40-1800 rpm Motor ----- 2.4 kW Weight ----- 1000 kg INCLUDES * 3-axis digital readout, brand SINO * Quick-change tool post type Multifix TOOE5 with 4 holders * 3-jaw chuck 200 mm Isdpfoga Ty Ejx Agpea * 4-jaw chuck 200 mm * Faceplate 250 mm * LED work light and coolant system * Fixed and traveling steady rest HEAVY-DUTY DESIGN WITH CAST IRON BASE

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with acceptance protocol certifying tolerances to new-machine standards Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock: MT 4 >> Feeds: 0.026 to 0.888 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle brake switchable >> Drive power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Features: switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of counting selectable >> 3-jaw chuck with wedge bars, nearly new, 200 mm, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet Iodpfevrcqdjx Agpoa >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Certification to inspection protocol. Painted in 2K high-gloss white. All accessories, including Multifix and chuck, are new. Safety: The machine features a brake motor, electronic spindle guard, and two emergency stop buttons – making this an as-new lathe. The Weiler runs very smoothly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and allows you to produce ground-quality surfaces. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: novo, Centre distance ----- 1000 mm Centre height ----- 230 mm Swing over bed ----- 460 mm Spindle bore ----- 58 mm Bed width ----- 300 mm Iodjk Iug Tjpfx Agpsa Spindle speed ----- 25–2000 rpm Motor ----- 5.5 kW Weight ----- 1750 kg INCLUDES * 3-axis digital display brand SINO * Quick-change toolpost type Multifix TOOB2 with 4 holders * Self-centering 3-jaw chuck 250 mm * Independent 4-jaw chuck 320 mm * Faceplate 350 mm * Fixed and travelling steady rests * LED work lamp and coolant system * Electric brake (CE) * Foot brake * Box with various tools

Stanje: dober (rabljeno), Leto izdelave: 1992, 1 rabljeni vodilno-vlečni stružni stroj Proizvajalec: Weiler Tip: Condor B Leto izdelave: 1992 Tehnični podatki: Razdalja med konicama: 750 mm Višina konic: 165 mm Vretenina odprtina: 40 mm Število obratov: 22 – 2800 obr/min Iedpjw Rcd Sefx Agpea Konjiček: MK 3 Pogonska moč: 1,6 / 3,2 kW Teža: 1040 kg Dimenzije: 1.850 x 880 x 1.290 mm Opremljen z: 3-osni digitalni prikazovalnik Tročeljustna vpenjalna glava Zaščita vpenjalne glave

Stanje: rabljeno, Leto izdelave: 1985, x-axis travel: 485 mm y-axis travel: 385 mm z-axis travel: 380 mm Table clamping surface: 800 x 460 mm Spindle taper: SK 40 Control: CONTOUR 1 Spindle speeds: 50 - 2500 rpm Feeds: 10 - 1000 mm/min Rapid traverse: 2 m/min Table load capacity: 600 kg Quill stroke: 80 mm Ijdpfx Agotqqllepea Total power requirement: 7.5 kW Machine weight approx. 2.0 t Dimensions L x W x H: 2.4 x 1.7 x 1.98 m Accessories: Vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system - X/Y/Z axes can also be operated via handwheels -