CNC stružnica švicarskega tipa

TORNOS DECO 2000/10

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Premer palice (maks.): 10 mm, število osi: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It comes equipped with a drum-type bar loader, an integrated hydraulic unit, and provides support at both the front and rear with a center height of 1100 mm. The machine features a sliding headstock, an oriented spindle stop, and a cross-slide with tool holders. It is ideal for precision turning operations and operates with AC drive motors and an absolute measuring system. Please contact us for further information about this machine. Overhauled in 2017, with two additional similar machines available (both overhauled in 2018). 2017 Overhaul included: Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindles S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the coolant pump, all coolant pipelines, and the coolant sensor. Replacement of wipers on the cross-slides. Replacement of all pneumatic lines and valves. Replacement of the machine compartment lighting, viewing windows, external fan, fan cables, and keyboard. Additional options (special services): Complete replacement (not just overhaul) of the guide bushing. Installation of a new central lubrication system. Replacement of bellows couplings, external encoders, and the display. Replacement of control and amplifier fans. Upon recommissioning, the "spindle positioning S4" option was activated and the bar loader set up. Additional Information • Maximum bar length: 3040 mm • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Sliding headstock • Cross-slide with 4 tool holders T11-T14 for vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • HYBRID 10+5 drum-type bar loader • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars (bars up to 8 mm without preparation) • Tryton collet • 2 different hybrid drum magazines • Directional-dependent spindle stop S1 • Can be configured with Robobar SSF 3 m bar loader Technical Specification Counter Spindle: Yes Fedpfjx D D Iksx Ahmoph

Stanje: rabljeno, Leto izdelave: 1965, Na voljo sta dva WMW SU 315x3000, priključna moč stroj 1/2: 12,6/12 kW, teža stroj 1/2: 8,2/9 t, potrebna je revizija. Fpedpfxexg Ihgj Ahmjh

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Travel: 66 mm - Spindle speed: 16,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° BUSH HOLDER 1 - Number of positions: 4 BUSH HOLDER 2 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm FRONT TOOL POST - Number of positions: 3 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm SUB OPERATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 1,700 x 1,010 mm - Machine height: 2,000 mm - Machine weight: 1,500 kg EQUIPMENT - CNC Control: Fanuc - Driven tools powered on: S2, S3, S5 Fpjdey Aprhopfx Ahmoh - Powered guide bushing - Part ejector - Coolant tank - Bar feeder: LNS TRYTON

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Travel: 66 mm - Spindle speed: 16,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° TOOL HOLDER 1 - Number of positions: 4 TOOL HOLDER 2 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm FRONT TOOL POST - Number of positions: 3 - Number of driven positions: 3 Fpedpfx Ahoy Aprbsmsh - Driven tool speed: 12,000 rpm SUB OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required floor space: 1700 x 1010 mm - Machine height: 2000 mm - Machine weight: 1,500 kg EQUIPMENT - Control: Fanuc - Driven tool motorisation at: S2, S3, S5 - Driven guide bushing - Parts catcher - Coolant tank - Bar feeder: LNS TRYTON

Stanje: rabljeno, Leto izdelave: 1998, Technical details: Swing diameter: 830 mm Turning length: 4000 mm Swing diameter over bed slide: 540 mm Spindle bore: 130 mm Speed range: 2 - 1,600 rpm Rapid traverse speed: 4 / 5 m/min Feed rate: 1 - 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Space requirement approx.: 7 x 2.2 x 2 m Fsdewwlt Repfx Ahmeph Equipped with R&D MTC-K cycle control MULTIFIX tool holder, size D Coolant system *

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm - Travel Z: 150 mm - Travel X: 225 mm Fsdpfjuha Umex Ahmeph - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel X/Y: 97/133 mm BACK WORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 6 kW WEIGHT AND DIMENSIONS - Footprint: 1063/2033 mm - Machine height: 1666 mm - Machine weight: 1700 kg ACCESSORIES - Control: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320

Stanje: rabljeno, Leto izdelave: 1992, Premer vretena 100 mm Pomik v osi x 1500 mm Pomik v osi y 1250 mm Pomik v osi z 1800 mm Število obratov 7,1-1120 vrt/min Površina mize 1200x1200 mm w-os 800 mm Plan drsnik 600 mm Hod drsnika plana 200 mm Digitalni prikaz Heidenhain Fodpfxoyqvmyo Ahmeph Tehnični podatki so podatki proizvajalca oziroma uporabnika in so za nas nezavezujoči. Vmesna prodaja je pridržana; veljajo izključno naši pogoji poslovanja in prodaje. O nas več kot 400 lastnih strojev na zalogi preko 15.000 m² skladiščne površine, kapaciteta žerjava 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali celotno podjetje, nas kontaktirajte. Dodatno ponudbo najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Vaša ekipa Markus Hirsch.

Stanje: rabljeno, Technical details: Fedpfx Ahovgmimsmoph Swing diameter: 626 mm Turning length: 3000 mm Turning diameter: 600 mm Spindle bore: 100 mm Spindle speeds: 2800 rpm Machine weight approx.: 18 t Machine overhauled in 2003 and equipped with Siemens 840 D - NC steady rest - Power chuck 400 mm - 12-station turret

Stanje: rabljeno, TECHNICAL SPECIFICATIONS Fedpfxjuwd Rys Ahmsph - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Travel distance: 205 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 1° TOOL HOLDER 1 - Number of positions: 10 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm BACK WORKING - Number of positions: 5 - Number of driven positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 2,269 x 1,160 mm - Machine height: 1,693 mm - Machine weight: 1,800 kg EQUIPMENT - Control: Mitsubishi MELDAS - Driven guide bushing - Parts catcher - Parts ejector - Coolant tank - Bar feeder: LNS Hydrobar Express 332 - Fire extinguishing system * NB: Functionality not guaranteed. Should be inspected by a qualified service provider designated by the buyer.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Citizen R07-VI CNC stružnica za dolge obdelovance Letnik 2015, v zelo dobrem stanju, letno vzdrževanje izvajano od začetka Na voljo sta 2 identični stroji, oba takoj dobavljiva Krmiljenje: Fanuc Največji premer obdelave: 7 mm Število servo osi: 6 (Z1/X1/Y1/X2/Y2/Z2) Fpsdpfx Aheyk Iv Tjmeh Število C-osi: 2 (glavno in nasprotno vreteno) Število držal za orodja: 5x držalo za struženje / 2x gnano orodje / 3x vrtalne postaje spredaj in zadaj Vključno z dodatno opremo: Podajalnik palic Iemca Elite 112 EVO Visokotlačna naprava Büchele SFB-100 Protipožarni sistem Kraft und Bauer