Večvretenični stroj

TORNOS AS14

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AS14824, število vreten: 6, največja hitrost vretena: 6.000 obr/min, prehod palice: 14 mm, Premer palice (maks.): 14 mm, skupna širina: 2.150 mm, skupna dolžina: 1.466 mm, skupna višina: 820 mm, stružna dolžina: 30 mm, Cam nadzorovani večvretenasti avtomatski stružni stroj TORNOS AS14 – generalno obnovljen leta 2016! Leto obnove: 2016 Število izdelkov: 1.957.690 kosov (stanje 19.12.25) Število vreten: 6 Nadzor: z izmenljivimi cami Največji premer obdelave: Ø14 mm Največja dolžina obdelave: 30 mm Hitrost vretena: 6000 vrt/min Nwsdpfjyxnp Djx Advsd Moč vretena: 7,5 kW Teža: 2200 kg Dimenzije (ŠxGxV): 2150 x 820 x 1466 mm Prevoz, prevzem in demontažo mora organizirati kupec.

Stanje: dober (rabljeno), Leto izdelave: 2016, stružna dolžina: 1.585 mm, moč vretenovega motorja: 22.000 W, hitrost vretena (min.): 5.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 1.585 mm, pomik po osi Z: 230 mm, skupna višina: 3.100 mm, skupna dolžina: 6.100 mm, skupna širina: 3.230 mm, skupna masa: 16.600 kg, Turn-milling center MAZAK - Integrex i-200ST x 1500U MACH-ID 9450 Manufacturer: MAZAK Model: Integrex i-200ST x 1500U Control: Smooth Mazatrol Year of manufacture: 2016 5-axis simultaneous EIA/ISO Milling spindle with thread cutting function Additional M-code (1 pair for 2 M-codes) Preparation for RMP-60 Sub spindle with C-axis, C1 + C2 synchronization High-pressure coolant (IKZ) 70 bar at main spindle High-pressure coolant (IKZ) 15 bar at lower turret Knoll Filtration KF-400/2300 SMW KNCS-N-325-104 3-jaw chuck Max. turning diameter: 658 mm X-axis: 260 mm Y-axis: 1585 mm Z-axis: 230 mm B-axis: 360° Spindle bore: 76 mm Spindle speed: 5000 rpm Spindle power: 22 kW Sub spindle speed: 5000 rpm Sub spindle bore: 65 mm Sub spindle power: 22 kW Tool changer: 36 stations Driven tool speed: 12,000 rpm B-axis interface: HSK-63 Lower turret stations: 9 Driven tool speed (lower turret): 6,000 rpm Driven tool power: 5.5 kW Length: 6,100 mm Width: 3,230 mm Height: 3,100 mm Weight: 16,600 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, sourced from the manufacturer. This information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contractual terms. We recommend verifying all important details. Nwodpoyrcxlsfx Adved

Stanje: rabljeno, Leto izdelave: 2016, The Mazak VTC 800 series is a range of high-performance, large-format 5-axis machining centers designed for large workpieces. They are renowned for their high precision and rigidity, making them ideal for aerospace, energy, and heavy machinery applications. Key features include integrated spindles, fast tool changes, and efficient complete machining capabilities. Accessories: - Tool magazine for 30 tools - Tool length measurement and tool breakage detection - Factory preparation for chip conveyor (left side) - Magazine (HSK) for 155 tools - Workpiece air blast system - Signal light (end of machining: yellow) - Additional work area lighting - Coolant gun - Air blast system through the spindle - Preparation for 70 bar coolant supply, incl. interface for high pressure unit - Automatic operator door opening/closing - Mazak Monitoring System B RMP 60 (only/H/V) - Brankamp collision monitoring system - 2 Renishaw TS27R tool setting devices - NC rotary table - Holding device for vertical use of NC rotary table - Table center partition for pendulum machining - 3D model of work area in STEP format Nwodpfex Idwiex Adved - 5-axis milling technology - Knall Compact Filter KF400/2300 (filter capacity 400 l/min, tank capacity 2300 l) - High-pressure cooling 70 bar, 7 pressure stages - Chip conveyor with hinged belt design - Additional M-codes 1 set = 2 M-codes - Preparation for double extraction system (mechanical connection) Ø 198 mm - Transformer for European market - 1 set of manuals in electronic format on CD - 1 set of adjustment tools - Foundation set (anchor bolts + plates) - MAZAK standard color - Work area lighting Additionally: - Air extraction unit AirFresh FMN V12 (installed on both sides and coupled with door sensor) - Holding device for vertical operation of the rotary table - 2 x Renishaw TS27R integrable tool setting devices Spare parts: - Y-axis motor for tool magazine - Motor for linear axis shifter - Motor for rotary axis shifter - Cylinder for swivel unit Technical Data: - Width: 3500 mm - Length: 820 mm - X-axis travel: 3000 mm - Y-axis travel: 800 mm - Z-axis travel: 720 mm - Min. distance spindle nose to table top: 140 mm - Max. distance spindle nose to table top: 860 mm - Max. table load: 2500 kgf - B-axis: ± 110 degrees - Main spindle: HSK63 - Max. spindle speed: 18,000 rpm - Min. spindle speed: 35 rpm - Rated power (100% duty cycle): 33.0 kW - Rapid traverse X-Y & Z-axis: 50 m/min - Table width: 3500 mm - Table length: 820 mm - T-slot width: 18 mm - Number of T-slots: 7 - T-slot spacing: 100 mm - Table height from floor: 870 mm - Tool changer places (standard): 30 - Tool changer places (option): 48 - Tool selection method: shortest path - Tool shank: steep taper 40 - With adjacent stations occupied: 80 mm - With adjacent stations free: 130 mm - Max. tool weight: 8 kgf - Total tool magazine weight: 150 kgf - Max. tool length: 350 mm - Tool change time (chip-to-chip): 4.7 s - Power supply: 400 V / 50/60 Hz - Air pressure: 5 – 9 bar - Air consumption: 260 l/min - Tank capacity: 500 l - Dimensions (H x L x W): 3376 x 5480 x 4051 mm - Weight approx.: 16,300 kg - Color: Grey / Black

Stanje: novo, Leto izdelave: 2025, največja hitrost vretena: 8.000 obr/min, hitrost vretena (min.): 8.000 obr/min, 1 Mehrspindel-Drehautomat TORNOS SAS16-DC im Wiederaufbau - neuer Schaltschrank SIEMENS oder FANUC, wählbar – Abholtisch mit Bremse – verstellbarer Anschlag mit Gegenbetrieb Nwodpfougl S Isx Advsd – 3 unabhängige Vorschubsysteme – mehrere Werkzeughalter und Bohrvorrichtungen – Trommelstangenführung mit Unterstützung – Optionen: automatischer Stangenlader IEMCA PRA, numerisches Gewindeschneiden, CNC-Querschlitten, etc. Kontaktieren Sie uns.

Stanje: dober (rabljeno), valjčni brusilni stroj Nodpotrgndjfx Advjwd

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds Nwsdsrqwbiepfx Adved • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, MAZAK QUICK TURN NEXUS 350-II MY x 1500 Maks. premer nihanja: 750 mm Nodpoya Du Rsfx Advowd Maks. premer obdelave: 420 mm Maks. dolžina obdelave: 1.539 mm Maks. hitrost rezkanja: 4.500 min⁻¹ Maks. hitrost vretena: 3.300 min⁻¹ Maks. premer palice: 102 mm Stroj je opremljen z: - CNC krmiljenje Mazatrol Matrix - KITAGAWA trivraten vpenjalni tulec BB-212, premer 304 mm - Tool Eye - C-os - Y-os - NC-konjiček - hidravlična luneta SMW - glavna vretena s premerom preboja za palico 102 mm - ojačana črpalka hladilne tekočine - transportni trak za odvod ostružkov, izmet ob strani - 8 kos fiksnih nosilcev orodja - 2 kos pogonskih nosilcev orodja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, moč vretenovega motorja: 5.500 W, največja hitrost vretena: 6.000 obr/min, skupna višina: 1.858 mm, največja dolžina izdelka: 3.675 mm, število osi: 7, Splošni podatki Višina mere: 1858 mm Dimenzije Dolžina stroja: 3675 mm Glavni pogon Število osi: 7 Hitrost vretena: 6000 obr/min Nwodpfox Ixigox Advjd Moč motorja vretena: 5,5 kW Tehnične specifikacije Pogonska orodja: da Ta 7-osni NAKAMURA Tome WT150 II je bil izdelan leta 2020 in vključuje dve 12-orodni revolverji ter motorizirane pozicije za večjo prilagodljivost. Ima visokotlačno črpalko za hladilno tekočino in vmesnik za podajalnik palic z LNS Quick Load Servo 80 S2. Idealno za zahtevne operacije obračanja in rezkanja, izkoristite priložnost za nakup tega stroja NAKAMURA Tome WT150 II. Za več informacij o stroju nas kontaktirajte. Vrste uporabe Struženje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, mazak j-200s technical data The Mazak INTEGREX j-200S is a compact 5-axis multitasking machine with sub-spindle (S) designed for complex turning and milling operations. Key features include an 8-inch main chuck, a maximum machining diameter of {Ø500 mm}, and a machining length of up to {910 mm}. The B-axis offers a swivel range from {-30°} to {+190°}. Main technical data (Integrex j-200S): Machining capacity: - Max. swing diameter: {530 mm} - Max. machining diameter: {Ø500 mm} - Max. machining length: {910 mm} Main spindle & sub-spindle: - Chuck size (main & sub-spindle): 8 inches - Main spindle speed: {5,000 min⁻¹} - Main spindle power (40% duty cycle): {18.5 kW} Milling spindle (B-axis): - Speed: {12,000 min⁻¹} (typical for j-series, partially optional values) - Swivel range: {-30°} to {+190°} (i.e. 220° total range) - Tool interface: KM63 or CAPTO C6 Axes & capacity: - Y-axis stroke: {200 mm} ({±100 mm}) - X/Z axes: {450 mm} / {1119 mm} - Tool magazine: 20–36 tools (depending on configuration) Nwedpsyfgdlsfx Advsd Control: MAZATROL SmoothG or Matrix Nexus 2 The machine features full C-axis capability for both spindles and an automatic tool changer, making it ideal for highly productive applications in a compact design.

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 004-040.0004, CNC Cylindrical Grinding Machine Manufacturer: STUDER Model: S22 CNC Year of Manufacture: 2009 Machine / Workpiece Data Distance between centers: approx. 650 mm Center height: 175 mm Maximum workpiece weight: 150 kg Maximum grinding length: approx. 800 mm Linear Axes / Guides X-axis (cross slide): maximum travel approx. 310 mm X-axis rapid traverse speed up to approx. 15,000 mm/min (depending on version) Z-axis (longitudinal slide): maximum travel approx. 850 mm Z-axis rapid traverse speed up to approx. 30,000 mm/min Grinding Spindle / Grinding Wheel Main spindle power, e.g., 12.5 kW in standard version Standard grinding wheel size, e.g., Ø 500 × 80 × 203 mm, circumferential speed up to approx. 50 m/s Optional high-speed grinding (HSG): e.g., grinding wheel Ø 400 x 40 x 127 mm, circumferential speed up to approx. 140 m/s Control / Software / Equipment Nwsdpfjxtpnzox Advod Control standard: e.g., FANUC 31i-A (PC integrated) with StuderWIN operator interface Guideways: Machine bed made of Granitan® S103 (mineral cast) for thermal stability and damping Dimensions / Electrical Requirements Total machine weight: approx. 8,500 kg Power supply: typically 400 V / 50 Hz (depending on country)