L + Z stružnica;

TONGIL- SAEILO TIPL-4SP

Stanje: dober (rabljeno), Technical Data: Working length: 2100 mm Maximum bending capacity: 10.0 mm Iedpfxjwchn Uj Af Tjtb Pre-bending: 8.0 mm Top roll diameter: 200 mm Bottom roll diameter: 180 mm Number of driven rolls: 3 Hydraulic drop-end bearing Cone bending device Extended rolls for section bending Control panel with digital display Motor power: 5.5 kW CE marking Dimensions (L x W x H): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several sets of rolls for pipe and section rolling The seller is not liable for typographical or data transmission errors. The machine is in visual and technical condition, and wear consistent with its age; used machines are sold without any warranty.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, O F F E R We can offer you, without obligation and subject to prior sale, the following from stock: DECKEL Universal Tool Milling Machine Type FP 2 Year of Manufacture ca. 1975 _____ Table travel: longitudinal motor/manual 390 / 400 mm vertical motor/manual 390 / 400 mm cross motor/manual 190 / 200 mm Fixed angle table 250 x 700 mm Installation height under spindle 400 mm Spindle overhang (quill travel) approx. 165–465 mm Spindle taper SK 40 Iodoxzk Iropfx Af Tjtb 18 spindle speeds 40–2,000 rpm Infinitely variable feed rate 5–400 mm/min Rapid traverse 1,200 mm/min Spindle drive 2.2 kW Total drive power 2.5 kW - 380 V - 50 Hz Weight 1,000 kg Accessories / Special Equipment • DECKEL universal swivelling angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and faceplates • Original DECKEL high-speed vertical milling head with separate drive • Large original DECKEL tool cabinet for storing the above accessories and various arbors, approx. 30 assorted collets, various milling tools, several arbors, etc., as well as operating tools, separate control cabinet, coolant system Condition : very good – demonstration-ready, ideal for training workshops/education Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice Constantly available: further DECKEL FP 1 / FP 2 / FP 4 milling machines and, of course, additional accessories such as spiral milling attachments also in stock

Stanje: dober (rabljeno), Tehnični podatki: Delovna dolžina: 2050 mm Isdjxruvzepfx Af Totb Največja zmogljivost upogibanja: 18,0 mm Predupogib: 12,0 mm Premer zgornjega valja: 280 mm Premer spodnjega valja: 280 mm Naprava za stožčasto upogibanje Hidravlični nagibni ležaj Moč motorja: 7,5 kW Dimenzije (dolžina x širina x višina): pribl. 3650 x 1550 x 1650 mm Teža: pribl. 7,5 ton Prodajalec ne odgovarja za napake pri tipkanju ali prenosu podatkov. Stroj je po videzu, tehniki in obrabi primeren svoji starosti; rabljeni stroji se prodajajo brez kakršnega koli jamstva.

Stanje: rabljeno, Leto izdelave: 1990, številka stroja/vozila: 2316-3, Ref. No. 10622 Technical specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25 (cast iron): 40 mm - Thread cutting ST 60: M 30 - Thread cutting GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm Ijdpfeu Et Nbjx Af Tetb - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min / max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Stanje: dober (rabljeno), Leto izdelave: 1984, številka stroja/vozila: 332, Offer 24130 Technical Specifications: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity GG 25: 40 mm - Tapping capacity ST 60: M 27 - Drill spindle taper: MK 4 - Quill stroke: 150 mm - 12 spindle speeds: 102 – 2000 rpm - 3 feed rates: 0.1 – 0.3 mm/rev - Min./max. distance spindle – table: 310 / 610 mm Itodpfx Aotxzrwsf Tob - Drilling radius min / max: 380 / 1200 mm - Table height: 720 mm - Table size: 1200 x 500 mm - Drive: 400 V / 2.0 / 2.4 kW - Space requirement approx.: W 1200 x H 2800 x D 2300 mm - Weight approx.: 1500 kg - With: - Tapping device - Hydraulic column and arm clamping - Coolant system - Vertical T-slots on rear machine side

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1976, Work table: 500 mm x 1200 mm Arm travel: 600 mm Tool holder: Morse taper 4 (MT 4) Drilling capacity: 32 mm in steel Tapping device Itjdpfx Aownn S Ref Tsb Coolant system Electrics: 24V control voltage Two-channel emergency stop Safety guard at the drill Completely overhauled in 2025 12 months warranty New paint finish RAL 7035 / 7031

Stanje: rabljeno, x-hod 400 mm y-hod 200 mm z-hod 400 mm Število vrtljajev vretena 18 Isdpoxqrdtjfx Af Tetb Vrtljaji 40 - 2000 min⁻¹ Pritrdilna površina mize 730 x 240 mm Vpenjalo SK 40 Razmak med utori 4 / 12 mm Število podajal 18 Območje podajal 8 - 400 mm/min Hitri pomik 1200 mm/min Skupna priključna moč 2,2 kW Teža stroja cca 1400 kg Potrebni prostor cca 1700 x 1400 x 1700 mm - robusten/močan univerzalni rezkalni stroj - Digitalni prikaz NEWALL - Hladilni sistem

Stanje: rabljeno, Leto izdelave: 1991, Delovna miza 600mm x 1200mm Hod roke 600mm Vpenjanje orodja MK 3 Vrtalna zmogljivost 28mm v jeklu Naprava za rezanje navojev Hladilni sistem Dokumentacija Isdpfx Asxpfglef Tetb

Stanje: novo, Rollmak 3-Roller Plate Rolling Machine SME 130-15/4.5 Special equipment included in price: - Hardened rollers - Motorized rear roller adjustment - Digital display Sheet width: 1,550 mm Sheet thickness (max): 4.5 mm Sheet thickness (pre-bending): 4.0 mm Roll length: 1,550 mm Roll diameter: 130 mm Minimum bending diameter: 195 mm Weight: 1,210 kg Dimensions (L x W x H): 2,650 x 900 x 1,200 mm Motor: 2.2 kW Features: - Top and bottom rollers electrically driven - Top roller swing-out - Conical bending device - Asymmetric roller arrangement - Self-braking main motor - Separate control and operating console - Safety cable Itodpfxjlu Erne Af Tob All values apply for St-37 / 240 N/mm² CE marking

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja: 360 mm, stružna dolžina: 700 mm, skupna dolžina: 1.800 mm, skupna širina: 900 mm, skupna višina: 1.600 mm, skupna masa: 1.000 kg, višina centra nad zgornjim vozičkom: 120 mm, Tour NARDINI MS 175 E à vis mère et vis d’avance DONNÉES TECHNIQUES & ÉQUIPEMENT : Tension de service : 380 V Fréquence : 50 Hz Tension de commande : 220 V Itedpow U Tr Iofx Af Teb Raccordement : 4,8 kW Passage de broche : env. 48 mm Longueur entre-pointes : env. 700 mm Hauteur de pointe sur banc : env. 180 mm diamètre de rotation sur banc : env. 360 mm Hauteur de pointe sur chariot transversal : 120 mm diamètre de rotation sur chariot transversal : 240 mm La machine est équipée d’une contre-pointe, d’un porte-outil rapide Multifix, d’un mandrin à serrage rapide, de différentes lunettes et d’un affichage numérique NUMÉRO DE RÉFÉRENCE 18 DIMENSIONS & POIDS : 1800 x 900 x 1600 mm 1000 kg INFORMATIONS POUR L’ENLÈVEMENT : L’article sera disponible à partir de septembre 2025. Une date d’enlèvement devra être convenue à partir du 01.09.2025. FCA : 73235 Weilheim an der Teck (DE), chargé sur camion