Transformator peči

TES ITALY 10MVA Furnace transformer

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, In stock Capacity – 500 l. Self-propelled. Diesel burner. Engine fuel tank – 50 l. Lhsdpfx Aled Swd Us Njf Oil tank – 30 l. Thermal oil heater – 80 l. Electrically heated hose – 6 m. Heating of the mastic via thermal oil (thermal oil jacket).

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. Ljdpfxofz U S Es Al Nehf By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.

Stanje: rabljeno, Chiron FZ18W Magnum Rotary Pallet Year: 1999 CNC Siemens 840D X 630 / Y 400 / Z 425 mm travel Ledjhkkwbjpfx Al Nshf Tables (2) 850 x 450 mm 20 tool magazine ISO 40 / 18 kW / 140 Nm Rapid traverse: 40 m/min HAWE hydraulics Automatic doors Chip conveyor Weight: 6 tons Dimensions: 3.6 x 2.25 x 2.85 m The machine can be inspected under power at our warehouse Mimu Machine Tools (Italy)

Stanje: generalkompletno obnovljen (rabljeno), 50,000 L steel tank for fire-fighting or potable water, certified for quality. The tanks are sandblasted and coated with a corrosion-resistant epoxy resin or PZH-approved paint. Lhjdofngf Iepfx Al Njf Dimensions: 2.80 x 8.5 m

Stanje: novo, Table diameter: 560 mm Table load capacity: 0.3 t Swivel range: 0-90 degrees Table rotation speed: 0.25 - 4 rpm Max. torque: 360 Nm Max. center of gravity distance: 150 mm Total power requirement: 0.4 kW The D-HB series rotary tilt tables are extremely stable due to their heavy-duty construction, making them particularly suitable for heavy and precise positioning tasks and circular welding operations. Features: - Easy installation - Increased productivity enabled - Improved weld quality thanks to optimal positioning and speed control - Reduced crane hours and handling time, while improving workplace safety - Self-locking gearbox, no overrun or backlash under eccentric loads - Electronic components by Schneider, Siemens, and Delta - Infinitely variable, frequency-controlled rotation speed - High stability due to rugged design Ljdpfxsgvkgtj Al Njhf - CE certification - The D-HB series includes a remote control with foot pedal for left/right rotation and start/stop functions.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Underground Tank, Firefighting Water Tank, Steel Storage Tank with a 30,000 Liter Capacity for the Storage of Process Water / Firefighting Water. Dimensions: Diameter = 2.00 m - Length = approx. 10.00 m The tank features a DN 600 manhole with domed cover, is used, internally emptied and professionally cleaned, and is externally coated with bitumen insulation/bitumen coating. The tank includes a permanently welded dome shaft made from steel sheet, including a walkable cover. Shaft dimensions: approx. 900 x 900 x 1,000 mm (width x depth x height) Minor insulation damage from removal and transport may be present on the tank. Price ex works Söhrewald – loaded, free of charge – For use as a firefighting water tank, we can fully equip the tank with a fire brigade suction connection, consisting of: - 1 pc. suction pipe DN125 made of stainless steel (V2A), with Storz A-fixed coupling and Storz A-blank cap, - 1 pc. DN100 vent pipe with hood, made of stainless steel (V2A), - 1 pc. anti-vortex plate mounted on the suction pipe, - 1 pc. sign "Firefighting Water Extraction Point", - 1 pc. dip tube with dipstick for measuring filling level, - 1 pc. dome cover with bolts and gasket. The suction pipe can be used as both a fill and extraction line. All components are supplied ready for installation – ex works – If required: Installation of a fire brigade suction connection, above ground, in accordance with DIN 14244 - Form B, including A-fixed coupling as per DIN 14319 and A-cover cap as per DIN 14319. Lhjdoi Ary Sspfx Al Nof Casing made of cast iron – externally coated with epoxy resin. General: You will receive an invoice with shown VAT. The purchase is subject to our general terms and conditions. Further tank systems (new and used) as well as rental units are also available!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, skupna višina: 11.000 mm, skupna širina: 2.350 mm, skupna dolžina: 11.395 mm, nosilnost na odsek shranjevanja: 35 kg, nosilnost: 49.560 kg, Te koop: 6 stuks!!! KARDEX Vertical Buffer Module LR35® Machinetype: LR-35-19x400x600x11000 Machinehoogte: 11.000 mm Benodigde opstellingshoogte: 11.050 mm Machinelengte: 11.395 mm Machinebreedte: 2.350 mm Aantal opslagsegmenten: 19 stuks Bakbreedte: 400 mm Bakdiepte: 600 mm Max. belasting (berekend per bak): 35 kg Oppervlakte machine (zonder draaiplateau): 23,49 m² Oppervlakte machine (met draaiplateau): 26,77 m² Toegestaan totaalgewicht: 59.492 kg Toegestane totale belasting: 49.560 kg Eigen gewicht (excl. bakken): 11.415 kg Snelheid x-as: max. 3 m/s Snelheid y-as: max. 3 m/s Veilige tussenafstand: 60 mm Opslagraster: 25 mm Toegestane omgevingstemperatuur in bedrijf: +5° tot +40° Toegestane relatieve luchtvochtigheid: 85% Bouwjaar: 2016 Machinehandel De Leeuw BV is een van de weinige bedrijven in Europa die hoofdzakelijk gebruikte Kardex Remstar VLM automatische liftsystemen (Shuttle systemen) en roterende magazijnsystemen (paternostersystemen) verhandelt en op voorraad heeft. Bekijk onze website voor de actuele voorraad. Wij monteren en/of demonteren deze systemen op een veilige manier met VCA-gecertificeerde monteurs — en doen dit al meer dan 33 jaar. Wij demonteren ook systemen van andere merken, waaronder: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard. Machinehandel De Leeuw BV Oordeelsestraat 7–b 5111 PA Baarle-Nassau Nederland Lhjdpfjwqp Npsx Al Nsf E-mail: info@deleeuw-machinehandel.nl

Stanje: novo, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 12.300 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Wiese 2-Axle Step Frame Platform Semi-Trailer with Fassi F545 Crane Mega Lowliner Chassis Welded construction with cross members, manufactured entirely from high-grade steel Neck height: approx. 220 mm including coupling plate Equipped with all necessary chassis reinforcements and cross connections Axles 2 BPW axles, each with 10,000 kg load capacity, fitted with 17.5" drum brakes ABS: 1 axle monitored Axle spacing: 1,810 mm Tyres 8 units, type 235/75 R17.5 Rims Aluminium rims, 10-hole, hub-centric, offset = 122 mm Lighting System 24V lighting system in accordance with EU Directive 76/756/EEC and subsequent amendments, featuring: 2x2 three-chamber LED tail lights 1x LED reversing light 1x LED fog light LED side marker lights Lane departure lights Number plate illumination 2x 7-pin sockets + 1x 15-pin socket wired as per EU standard Floor Galvanised grating floor in the low-bed area Steel chequer plate in axle area Load Securing Outer frame with D030 mm lashing hole profile on the bevel 2x12 lashing points, 8,000 daN in the outer frame 3 rows of combo stake pockets for 80x80 mm insert stakes in the low-bed area Accessories 2x wheel chocks with holder Spare wheel carrier winch 2x toolboxes with slide-out drawer (for chain storage) Surface Protection Steel structure: blasted and primed Paint Finish Chassis/frame/floor frame: single colour in RAL 3020 (traffic red) Axle hubs: single colour in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminium Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional stabiliser beams 360° working range Lsdpfx Asn Hrtgsl Nehf Approx. 90% lifting capacity towards the front For further information please do not hesitate to contact us.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Complete CNC control system from SCHNEEBERGER GEMINI tool grinding machine Lsdpfx Aemn Th Esl Nshf Manufacturer: GE FANUC SERIES 160-M, year 1998, with dongle Complete with controller.

Leto izdelave: 1990, stanje: dober (rabljeno), Somab CNC Lathe Model: Unimab-500 Control: Somab PL+5 Swing over bed: 500 mm Swing over cross slide: 300 mm Spindle bore: 72 mm Turning length: 1500 mm Max spindle speed: 2500 rpm Lhsdpfx Aloigl Tas Nef Chuck diameter: 320 mm Power: 18 kW Year of manufacture: 1990 Including central lubrication and coolant pump Dimensions: 340 x 180 x 175 cm (LxWxH) Weight: approx. 6,500 kg